Measuring equipment - Import export

In order to measure torque and force, a large range of sensors is available. All these sensors are bidirectional, inductive or resistive type with a good linearity and negligible hysteresis. These sensors allow to measure torque less than 1 uNm and up to 1 Nm.

The Digimes Universel is a 5 KHz carrier current bridge for resistive, inductive or differential transformer transducers connected in full or half bridge. The sensitivity is adjustable by the user between 2 mV/V and 100 mV/V according to six measuring ranges. Gain and offset can be adjusted with potentiometers to allow calibration of the sensor. There is also the Digimes Compact, dedicated to one sensor.

The CLA TSF-000 through TSF-5 are bidirectional, inductive type torque sensors. The measurement system is composed of an axis mounted on flexible pivots with cruciform springs allowing frictionless torque measurement. The axis rotation angle measurement, which is proportional to the measured torque, is performed via an inductive displacement sensor with carrier frequency. The small rotation angle, approximately 1° for all measurement range, allows very good linearity and negligible hysteresis.

The CLA LC-01 and LC-1 are bidirectional, inductive type force sensors. The measurement system is composed of a displacement transducer which mobile core is linked to two leaf copper beryllium springs. The spring flexion measurement, which is proportional to the force to be measured, is performed by inductive sensor with carrier frequency. The measurement shaft is interchangeable, allowing the use of special shaft.

The CLA SC-002 is bidirectional, resistive type force sensor. The measurement system is composed of a semiconductor strain gage. The measurement shaft is made of a 0.5mm diameter axis with a positioning notch for calibration and measurement. The design of that sensor is specially made for a high resonance frequency.

The EBATmètre® is a device for measuring height clearances. It is principally used to measure the moving parts of a mechanical watch movement.

The NEOvario is a high-technology device, which is completely compact and integrated. The measuring devices will meet the demanding needs of torque and force measurement fields. ACCESSORYS : - Universal Digimes - Universal sample holder for watch movement - VARIOweight - Measurement standard - Adjustable angular support - Anti-vibration table

VARIOcouple® The VARIOcouple® apparatus for torque and force measurement manufactured by CLA is a very precise instrument mainly used in development laboratories of watchmakers. This instrument allows quantifying and analyzing small torques and forces generated in low stress systems. ACCESSORYS : - Universal Digimes - Universal sample holder for watch movement - VARIOweight - Measurement standard - CLApt1000 - Temperature sensor - Adjustable angular support - Anti-vibration table

Automation with direct impact: BARImètre® Automat can absorb 150 barrels per measuring channel (4 channels max). Load your machine, press START and the Automat will do the rest.

The BARImeter® is a precision metrology device that offers a great flexibility in the measurement of microtechnical, horological and medical parts. In particular, it is possible to measure small friction torques in both directions of rotation as well as holding torques. Examples: - Barrel measurement - Friction-wheel measurement

The measuring wire ist fastened to the headstock or a special holding device, fed at the end of the base over a pulley and stretched tight with a weight (layout according to DIN 8606). The alignment tester must be placed on the carriage of the machine or a corresponding device, which can be moved in a longitudinal direction in predefined steps on the machine base. The measuring wire must be aligned in such a way that the same values are measured in the starting and end position of the carriage, i.e. that it is tensioned to form an imaginary connecting line parallel to these positions. When the wire is aligned to the bearing, the value display is set to zero. The straightness deviation can now be read directly on the display for each position when both parts of the image are fitted together by moving the microscope horizontally with the integrated micrometer spindle.

Designing special devices according to client specification

-Static Pressure Test Equipment -LOSS OF PRESSURE TEST EQUIPMENT -WATER METER ENDURANCE (ABRASION) TESTING EQUIPMENT -HEAT METER DURABILITY TEST EQUIPMENT -DOMESTIC WATER METER TEST AND CALIBRATION EQUIPMENT -WOLTMAN WATER METER TESTING EQUIPMENT -HEAT METER TEST AND CALIBRATION EQUIPMENT -MOBİLE TEST UNIT

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Materials: aluminium body - polypropylene turbine Orifices: 1" BSP M/F Max. pressure: 20 bars Digital meter: for low-viscosity fluids with a turbine-equipped measuring system Charge loss < 0.03 bar (120 l/min with diesel) Accuracy: ± 1% in the flow rate range Repeatability: 0.2% Temperature of use: from -10°C to +50°C Measuring system: calibratable turbine

Technical Line Cutting Twist Metal Processing San. Tic. Ltd. Şti. has made and continues to make significant investments in measurement, control and testing equipment to ensure the suitability of its products and the continuity of their total quality.

This parts used for mechanical parts.