Measuring equipment - Import export

-Static Pressure Test Equipment -LOSS OF PRESSURE TEST EQUIPMENT -WATER METER ENDURANCE (ABRASION) TESTING EQUIPMENT -HEAT METER DURABILITY TEST EQUIPMENT -DOMESTIC WATER METER TEST AND CALIBRATION EQUIPMENT -WOLTMAN WATER METER TESTING EQUIPMENT -HEAT METER TEST AND CALIBRATION EQUIPMENT -MOBİLE TEST UNIT

Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Other information Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0 Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the Zipper E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Zipper Zipper E-Chain® Short installation time: Lightning fast opening and closing of lids with zipper Zipper lid can be separated and joined in any chain link Small pitch for low-noise, silent operation High accelerations: 100 m/s² and more Interior separation possible Zipper E-Tube resistant against chips and dirt Closed E-Tube with zip-open system Protection against dirt and chips Lightning fast opening of the lid in a band Modular design - simple lengthening and shortening Small division for low-noise, silent operation, high accelerations Typical industrial sectors and applications Automatic insertion machines Semiconductor devices Linear motors, handling systems Any kind of technical equipment Measuring instruments Machine tools (Zipper E-tube) Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0

The line laser is a measuring device for aligning drive pulleys laterally, horizontally and vertically using a laser beam, preventing heavy wear to the edges of the belt. Laser beam range approx. 5 to 10 m Laser class 2 (EN 6082511997) Wavelength 630–680 mm Power < 1 mW Power supply 2 x 1.5 V (LR44) Note Never look directly into the laser beam and do not point it at other people, animals or strongly reflective surfaces. The device and the target points contain highpowered magnets. Individuals with pacemakers should not use the device due to safety reasons. Keep a safe distance away from electronic devices and wristwatches in order to prevent interference. The device must not be used in potentially explosive areas.

The particle image velocimetry (PIV) is an optical noninvasive working flow velocity measurement method. The flow field is made visible by introducing into the fluid small buoyancy neutral particles – the so called tracers. The particle flow then is illuminated with the aid of a light sheet and recorded at two defined different times within a small time interval with a digital camera. Because the particle move within this time interval with the flow, one can calculate the particles velocity by knowing its path between the two moments of illumination. The result is a velocity vector field of the flow. Here, we assume that the particles are small and follow the flow without any slip. Compared to local methods like LaserDopplerVelocimetry (LDV) with the ParticleImageVelocimetry one can reconstruct a whole flow region An extension of ParticleImageVelocimetry is the combination of PIV with thermometry (PIV/T).

A further area of activity of Suvis is the development and application of modern numerical methods for the calculation (prediction) of flows using CFD in industry, science etc. Our employees are especially trained in view of technical applications of numerical flow simulations. Within the recent years we conducted several projects in the area of multiphase flows. We dealt with applications in the optimisation of processes in chemical engineering, the transport of particles, gas cleaning and particle separation from gases and liquids, and the calculation and optimisation of cyclone separators. We apply powerful commercial software tools like grid generators in order to generate numerical grids using CADdata in a short time for even complex applications. Also, for flow calculations and the evaluation of 3D flow fields we apply powerful software solutions. Furthermore, for certain individual problems we apply codes we have developed our selves.

For the generation and production of a spray the knowledge of information like the desired droplet size and its distribution is of fundamental importance. In order to characterise a spray correctly, one has to know the droplet size distribution of the droplets, which were generated out of a given liquid. In many applications it is desired to produce very small droplets. For the design and lay out of inhalers for example, it is necessary to achieve droplet sizes not larger than approximately 10 μm to be absorbed by the lungs. When one designs an atomisation nozzle in view of the desired droplet size distribution, one has to make sure via measurements, that the nozzle is really able the produce the expected droplet size distribution within an acceptable uncertainty range. Besides the droplet size distribution, the droplet velocity is an important parameter since it is a measure of the droplet momentum.

The tension meter is used to perform a pretension test on commercially available belt systems quickly and easily by means of frequency measurement. Fully electronic and equipped with stateoftheart microprocessor technology, the meter enables precise adjustment of all V, toothed and flat belts that have to be tensioned in the range from 10 to 600 Hz. The measurement must never be performed while the drive is running The meter is not permitted or certified for use in potentially explosive areas.

We support you in the efficient management and monitoring of your measuring and testing equipment. We offer you a comprehensive analysis of your current processes and identify optimization potential. Together with you, we develop individual solutions to optimize your processes and thus save time and money. Our experienced team is at your side for all questions relating to measuring and test equipment management and supports you in the implementation of the measures. In doing so, we always pay attention to high quality and compliance with all relevant standards.

Learn how to efficiently manage and monitor your measuring and testing equipment. In this training course, you will learn the basics of measuring and test equipment management, the requirements for calibration and documentation. The training is aimed at all those who are responsible for or interested in measuring and testing equipment. Topics of the training course: Measuring and testing equipment management as a pillar of quality assurance; Measuring and test equipment management as part of the quality management system – test equipment officer; Suitability of devices and sensors as measuring and testing equipment; Traceability and calibration; Documentation and employee training; Monitoring and maintenance of the measuring equipment database.

Building an effective measuring and test equipment management system can be challenging, e.g. for companies in the early stages or in need to rebuild their system from scratch. However, good planning and implementation of the set-up are crucial to ensure that measuring and testing equipment works reliably and precisely and thus the quality of your products or services is assured. We support you in implementing an effective system right from the start. We work closely with you to understand your requirements and goals and then develop a bespoke concept tailored to your specific needs. Our experienced team supports you in the selection and procurement of suitable measuring and testing equipment and takes care of the complete documentation of the entire process. We ensure that your system complies with applicable standards and that your employees can use and maintain the system effectively. That ensures reliable and accurate measurements, thus helping to improve your product quality.

Learn how to efficiently manage and monitor your measuring and testing equipment. In this training course, you will learn the basics of measuring and test equipment management, the requirements for calibration and documentation. The training is aimed at all those who are responsible for or interested in measuring and testing equipment. Topics of the training course: Measuring and testing equipment management as a pillar of quality assurance; Measuring and test equipment management as part of the quality management system – test equipment officer; Suitability of devices and sensors as measuring and testing equipment; Traceability and calibration; Documentation and employee training; Monitoring and maintenance of the measuring equipment database.

FT water temperature controllers make it possible not only to cut down on the use of electrical power for heating (in fact, the heating elements remain off during steady-state operation), but they also make it possible to limit the cooling power spent on cooling by self-stabilizing through a process called Autotuning. This system also saves resources (water and energy) compared to units without them. They are designed to condition molds and cylinders for various industrial processes, including plastics and rubber molding and extrusion, and in the paper industry.

Most industrial process temperature control units work through the pressure exerted on the water of the process utilities: this is convenient in most “standard” cases, given the higher efficiency developed by the system. However, some critical process issues can make this type of operation difficult: this is the case of machines that leak fluids, or with leakage, and that it is not convenient to maintain on the spot. In such cases, it is therefore useful to work with a vacuum temperature control unit, which sucks in utility water. FTT PD water thermoregulators are flexible and effective systems, which can work under either pressure or vacuum depending on the peculiarities of the system. Any fluid losses are therefore minimized during operations. A simplicity of operation is also ensured by the touch-screen panel, also found on other Frigofluid temperature controllers. Models with an increased pump are also available for users characterized by high pressure drops.

Often the main critical issue for molding industries is not achieving the temperatures needed for their processes, but maintaining them over time. Hence the usefulness of temperature control units that not only send the fluids needed to do the job up to temperature, but are capable of subsequent self-tuning. This is the way FTT DC water temperature controllers operate, which wrap direct cooling to stabilize fluid grades after the desired temperature has been reached. This requires integration with a source of cooled water: a simple well or a chiller or cooling system (chiller or dry cooler). Our engineers are available to determine which cooling solution is the most effective and economical. Not only that. The management of these successive heating-cooling steps is easier when done with a touch screen: a feature with which FTT DC temperature controllers are equipped. Units in the FTT category are specially designed to condition molds.

Our mobile field service teams provide any kind of service on electrical or mechanical equipment such as inspection, diagnostic measurements, maintenance and repairs of rotating equipment and transformers. In addition, our field crew can also perform minor- and major overhauls, including commissioning and start-up assistance. All of our field service activities can be performed on scheduled or non-scheduled basis. Maintenance Partners’ field teams are highly flexible and can cover a broad range of maintenance activities, for example: Complete stop based maintenance On site engineers to support your maintenance department Contract based maintenance Condition monitoring and diagnostic measurements Removal of rotating equipment for overhaul Installation of rotating equipment after overhaul On site bearing changes Laser alignment On site balancing of fans

Field Service: Activities Our mobile field service teams provide any kind of service on electrical or mechanical equipment such as inspection, diagnostic measurements, maintenance and repairs of rotating equipment and transformers. In addition, our field crew can also perform minor- and major overhauls , including commissioning and start-up assistance . All of our field service activities can be performed on scheduled or non-scheduled basis. Maintenance Partners’ field teams are highly flexible and can cover a broad range of maintenance activities, for example: Complete stop based maintenance On site engineers to support your maintenance department Contract based maintenance Condition monitoring and diagnostic measurements Removal of rotating equipment for overhaul Installation of rotating equipment after overhaul On site bearing changes Laser alignment On site balancing of fans Equipment To provide a complete onsite service, our field teams have a broad range of equipment at...

We offer you standardised complete systems for the measurement of volume & mass flows. We use measuring elements that have established themselves within previously built customer-specific test benches and convince with high measuring accuracy. We develop and manufacture Venturi tubes and nozzles as individual components or as VMF® complete systems. The VenturiMasterFlow® measuring system, VMF® for short, is used for the precise measurement of air or gas volume and mass flows of 100,000 m³/h. The core of the VMF® system is the FlowProcessor, a PC system with the corresponding data acquisition hardware. Venturi nozzles convince by a low remaining pressure loss and are suitable for flow measurement of gases with high temperatures. The software developed under LabVIEW is operated either via touch screen or with mouse and keyboard.

Apparatus for pressurizing test pieces We offer burst test benches to test load-bearing elements under pressure for their resilience. The components to be tested are put under pressure until they burst. Depending on the requirements (e.g. depending on the medium, pressure range, static or pulsating tests) we build your customized test stand.

The RTQ-2000 is a revolutionary device connecting directly to the Open Channel Non-Contact RAVEN-EYE Radar Velocity flow sensor. The RTQ-2000 has the capacity of transmitting the flow data, raw level, velocity, temperature from most manholes without special manhole cover into the Internet using GPRS data communication technology. Data is available for visualization and download in Excel format from any Internet browser. SMS (option) and E-mail alarming are possible. Automatic Data transfer to an existing data base is possible using XPATH module. Key Features: GPRS Data Transmission directly from the manhole to the 123flow.com platform The 123flow.com platform allows to view the data, build personalized graphics and manage all measurement locations Remote firmware update Remote measuring site configuration Li-Ion rechargeable batteries It transmits the data from most manholes without modifying the manhole cover

The Flo-Sonic OCFM is a permanent measurement system for open channel applications using the ultrasonic transit time technology. It is designed to suit a large range of applications for clean to polluted water with very different flow conditions. The Flo-Sonic OCFM sensors are designed to be installed in channels and rivers with various shapes and dimensions with a maximum width of 15 m for clean water applications. The Flo-Sonic OCFM system consists of one or more Flo-Sonic ultrasonic speed processors associated to one UNI-TRANS flow processor and monitor and two Flo-Sonic probes per path. Very complex applications can be equipped with up to 16 measurement paths. The Flo-Sonic OCFM uses the very latest electronic technology combined with highly efficient digital signal processing (D.S.P). The D.S.P. technique maximizes the system performance giving the user significant benefits.

The IFQ LOGGER is a portable converter and logger for Flow-Tronic flow sensors. It disposes of one RS485 digital serial communication port with specific communication protocols for RAVEN-EYE or BELUGA flow sensors and one 4-20 mA input for external level. The IFQ LOGGER combines high performance with low power requirements. The unit needs 12 VDC nominal power supply either provided from an optional battery pack or solar panels. The IFQ LOGGER keeps the same easy configuration enhanced by the IFQ MONITOR and stays in line with the flexible and modular architecture launched by the RAVEN-EYE. All flow sensors are field interchangeable. A dry contact output is available for users needing an output for samplers or any other instrument. KEY FEATURES: 1 x RS485 digital sensor interface for velocity (RAVEN-EYE or BELUGA) 1 x 4-20 mA analog input for level sensor 7 position sealed membrane keypad 2 Gb memory (SD card) Power supply : 9 to 18 VDC Enclosure: PPC (IP67)

The IFQ MONITOR is an easy to use and configure monitor and converter for Flow-Tronic flow sensors. It disposes of one RS485 digital serial communication port with specific protocols for RAVEN-EYE or BELUGA flow sensors and one 4-20 mA input for external level. The IFQ MONITOR is the easiest way to integrate an open channel flow sensor from Flow-Tronic to a local station. KEY FEATURES: User friendly interface Wide range of languages available: English, German, French, Russian, etc. 1 x RS485 digital sensor interface for RAVEN-EYE or BELUGA 1 x analog input 4-20 mA for external level 3 x analog output 4-20 mA for flow, velocity & level 1 x contact closure output for total flow 1 x normally closed relay output for alarm Logger (optional): 2 Gb flash memory (SD card) USB communication port (optional) GPRS/3G (optional) 7 position sealed membrane keypad 144x32 pixel white on blue graphical display

The humimeter BM2 biomass moisture meter measures the water content of various kinds of biomass and is ideal for operators of biomass heating plants. The bulk density compensation ensures accurate and reliable results. The BM2 biomass moisture meter can be used for the determination of water content of wood chips, bark, wood pellets, elephant grass, wood shavings, sawdust and maize cobs. Handling / Measuring procedure Place the empty measuring device on the scale and fill the supplied 13 liter bucket with the material to measure. Constantly fill the material into the measuring chamber and select the right calibration curve. The humimeter BM2 biomass moisture meter instantly displays the water content. If required the measuring value can be saved on the device or sent to your PC via supplied USB cable. + high accuracy due to high sample volume of 13 liters + bulk density compensated + quick measuring results + wide range of calibration curves + customer calibration function

The humimeter FLH hops moisture meter can determine the water content of hop bales, hops equilibrium moisture content, air humidity in a kiln or in conditioning chamber as well as long-term recording of temperature and climate data. For connection with the following external sensors: insertion probe for hops, air humidity and temperature sensor, infrared temperature sensor. For determination of water content of loose or compressed hops, hops equilibrium moisture content, air humidity of kiln and conditioning chamber, long-term recording of temperature and climate data. Quick and simple determination of water content of hops with humimeter FLH hops moisture meter.

The humimeter FL2 hay moisture tester is very well suited for producers, traders and end customers. Only the exact moisture measurement of hay and straw guarantees optimal further processing. The humimeter FL2 hay moisture tester allows a quick and easy measurement: push the hay temperature probe into the hay or straw bale, turn on the hay moisture tester and read off the water content and temperature from the LCD within seconds. The measuring values can be stored on the hay moisture tester and sent to a portable printer or PC if required. The water content is an essential criterion for the quality of hay and straw bales. That's the reason why quality control in this field becomes increasingly important. By an exact moisture measurement, you can avoid problems caused by mould and avoid paying the high product price only for water. To avoid costly mistakes due to incorrect moisture levels it is necessary to check the moisture in the manufacturing and treatment process

The humimeter RH5 paper moisture meter is a powerful moisture tester with sword probe (see picture) for humidity measurement in paper stacks. To determine humidity, the sword sensor only has to be inserted into the paper stack and left there for a short conditioning time. Via the integrated datalog the measuring values can be stored on the humimeter RH5 paper moisture meter and additional data can be added. You also have the possibility to use the Autolog function. This function automatically saves measuring values in adjustable time intervals.

Grain moisture meter for maize, rye, Triticale, wheat, barley, oats, rape, soybeans, horse beans, sunflower seeds, sorghum millet and millet, mustard seeds, buckwheat, peeled and unpeeled rice, further species on request The humimeter FS1 grain moisture tester is a powerful and handy humidity measuring instrument for grain, for determining the water content of many grain types. Thanks to the Hold function the measuring value can be frozen on the display of the grain moisture tester until another button is pressed. To increase the measuring accuracy and reproducibility, different hectolitre weight classes are stored in the device. This ensures that the bulk density doesn´t affect the measuring result. The whole grain moisture tester series is calibrated and checked according to the calibratable kiln-drying method EN-ISO 712. Simultaneously, the moisture meter for grain also measures the sample temperature and includes it in the calculation of the measuring result.

The food moisture meter humimeter FSG offers fast and reliable nondestructive measurements of the water content of various food products. Our food moisture meter comes with calibrations for numerous food products and can be calibrated for further products on request or by yourself! Calibrated for spiral noodles, peeled, unpeeled and roasted peanuts, peeled and unpeeled walnuts, peeled and unpeeled macadamia nuts, almonds. Our food moisture meter can be be calibrated for other products on request. Optionally you can calibrate it for other products yourself. Handling: To perform a measurement, simply pour the sample into the measurement chamber of the Food Moisture Meter and the device will automatically determine the water content within mere seconds. Once the measurement is done you can empty the measurement chamber and perform another measurement immediately.

The humimeter LM6 leather moisture meter is a handheld moisture meter for measuring the moisture of leather in a nondestructive manner. It is well suited for all kinds of leather and various degrees of moisture - from wet to dry leather. Handling and measuring procedure: After selecting the calibration curve for the leather to be measured, press the humimeter LM6 onto the leather surface with appropriate pressure. Water content and temperature can immediately be read off the large, well lit display. The measuring procedure does not destroy the leather surface in any way. By effecting various measurements in different areas of the leather hide, the average water content can be determined immediately. Via the integrated datalog the measuring values can be stored and additional data like supplier or batch number can be added.