Measuring equipment - Import export

The measuring wire ist fastened to the headstock or a special holding device, fed at the end of the base over a pulley and stretched tight with a weight (layout according to DIN 8606). The alignment tester must be placed on the carriage of the machine or a corresponding device, which can be moved in a longitudinal direction in predefined steps on the machine base. The measuring wire must be aligned in such a way that the same values are measured in the starting and end position of the carriage, i.e. that it is tensioned to form an imaginary connecting line parallel to these positions. When the wire is aligned to the bearing, the value display is set to zero. The straightness deviation can now be read directly on the display for each position when both parts of the image are fitted together by moving the microscope horizontally with the integrated micrometer spindle.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.

This parts used for mechanical parts.

These are the optical fiber fastener which accessories used in electronic. They were made by brass, optical fiber fasteners are essential components in the field of fiber optics. Optical fiber fasteners play a crucial role in managing and securing fiber optic cables. They are designed with specific features to ensure the safety and integrity of the cables, making them an indispensable tool in the field of fiber optics.

Laser Scanner Solution: This task is a typical application of the high-resolution QuellTech 2D/3D Q5-880 Blue Laser Scanners. Two of these units are placed at the left and at the right of the measuring objects, at a defined inclination angle. Blue laser light in this case is a prerequisite, as the cast parts are red-hot, hence emitting in the red spectral range. Additionally, the client was in need of a software solution for the project, so a 3D point cloud processing application was implemented, performing inline and evaluating width, height and angle results. QuellTech customer is able to inspect continuously the product quality, simultaneously avoiding scrap. He uses the same system for more than 10 different types of castings. Errors caused by manual inspection are considerably reduced, and safety for personnel is enhanced.

The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.

Many materials cannot be measured tactilely, therefore non-contact thickness measurements become necessary. Especially e.g. with glowing materials, or wet processes, a continuous tactile measurement is nearly impossible. Furthermore, web speeds in plant engineering and production have increased, requiring a corresponding fast sampling rate of the measuring systems. In addition, high measuring widths are often required. Why is contact free measurement technology so perfect for this application? Can be used in any web width, Scalable measurement thicknesses from a few millimetres to several meters, Thickness and coating thickness can be measured for different materials, Vibrations of the web materials, can be compensated, Turnkey solution for mechanical engineering, Non-contact and non-destructive measurement method, Large distances to the measured object are possible, Measurement of free forms,

Particular Challenges of the Application: By tactile equipment, determination of the deepest point on a rough metal surface is neither simple or precise. As a consequence, often either too much material is removed, or the surface is still covered with defects which have to be eliminated by a following milling cycle. The equipment is arranged in parallel, so that the complete width of the slabs is covered. The sensors are calibrated to a common coordinate system and mounted on a movable gantry. Before measurement, the slabs are fixed in place. The scanners mounted on the gantry are guided over the measuring object, driven by an electric motor. The point cloud recorded by the four scanners is consolidated in a PC by means of the QuellTech image processing software which calculates the difference between highest and lowest point of the corresponding surface and compensates for possible inclination of the slab (detrending).

Particular Challenge: For the assessment of rotating parts, numerous parameters have to be taken into consideration: Concentricity, radial run-out and axial run-out (i.e. wobble); furthermore thickness, diameter, planarity and the absence of surface defects had to be examined. The solution developed by QuellTech consists in a configuration of three Q6 Laser Laser Scanners.Each of the lateral surfaces is assigned to its own scanner. In order to enable the thickness precisely to be determined, both laser lines are mutually oriented in opposite direction. The third scanner inspects the outer circumference of the wheel, this way measuring diameter and radial run-out. All of these scanners are subject to encoder signals supplied by the rotary axis and synchronously triggered, so possible defects on the wheel can precisely be localized. The measurement takes place at a resolution of ca. 30 µm, and a cloud comprising several millions of points are obtained.

Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Other information Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0 Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the Zipper E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Zipper Zipper E-Chain® Short installation time: Lightning fast opening and closing of lids with zipper Zipper lid can be separated and joined in any chain link Small pitch for low-noise, silent operation High accelerations: 100 m/s² and more Interior separation possible Zipper E-Tube resistant against chips and dirt Closed E-Tube with zip-open system Protection against dirt and chips Lightning fast opening of the lid in a band Modular design - simple lengthening and shortening Small division for low-noise, silent operation, high accelerations Typical industrial sectors and applications Automatic insertion machines Semiconductor devices Linear motors, handling systems Any kind of technical equipment Measuring instruments Machine tools (Zipper E-tube) Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0

The key to the successful optimisation of compressed-air systems is data. The METPOINT® range of measurement equipment with sensor technology and monitoring provides the data base for the evaluation and assurance of the compressed-air quality and for the identification of hidden cost drivers. Our measurement equipment can also be employed for the extension of plants and for the early elimination of malfunctions. With our sensor technology, you can capture residual oil content, residual humidity, volume flow and pressure – constantly, faultlessly and with exemplary precision. Our Monitoring and Data Logging makes all the relevant data accessible to you and your employees at a glance, ensuring the safety of your processes and the quality of your products. In this way you can take your energy management and quality control requirements to the next level of success.

The TELEFIX telescopic meter by Nestle can extend up to a height of 4 meters and is suitable for measuring roof heights, ceiling heights, and spaces. The integrated horizontal and vertical spirit level ensures precise handling. The TELEFIX enables an easy analog reading of the mm division in a convenient height without bending or shaking the telescopic meter.

Bucket for transporting bulky goods. Saves space, sturdy, easy to carry, available with lid.

Standard checkweighers with metal detector the inspection system for quality assurance at the highest level Bizerba's CWEmaxx series checkweighers with metal detector are used in the food industry mainly in middle- and high-performance settings. In the non-food area, they are used in lines with high output and wherever nominal weights up to 15 kg have to be checked. A built-in VARICON metal detector transforms the dynamic checkweigher CWEmaxx into a complete inspection system in compliance with HACCP, IFS, BRC and others. Verifiable combination units optimise quality assurance. They control the packaging flow by categorising and sorting goods by freely definable or legally stipulated weight classes. Checkweighers with metal detectors also check out of tolerance or contaminated packages and are automatically ejected. A combination checkweigher with metal detector is the ideal solution when space is at a premium, used with _connect.BRAIN the system will seamlessly integrate with...

Fizeau Interferometer, 4″ -System, Tabletop system, Automatic interference evaluation.