Alignment Tester FLZ
Description
The measuring wire ist fastened to the headstock or a special holding device, fed at the end of the base over a pulley and stretched tight with a weight (layout according to DIN 8606). The alignment tester must be placed on the carriage of the machine or a corresponding device, which can be moved in a longitudinal direction in predefined steps on the machine base. The measuring wire must be aligned in such a way that the same values are measured in the starting and end position of the carriage, i.e. that it is tensioned to form an imaginary connecting line parallel to these positions. When the wire is aligned to the bearing, the value display is set to zero. The straightness deviation can now be read directly on the display for each position when both parts of the image are fitted together by moving the microscope horizontally with the integrated micrometer spindle.
- Measurement - Equipment & Instruments
- Measuring Configuration
- Equipment Measuring
Similar products from WALTER UHL TECHNISCHE MIKROSKOPIE GMBH & CO. KG
WALTER UHL TECHNISCHE MIKROSKOPIE GMBH & CO. KG
Germany
Portable measuring microscope with split-field eyepiece and integrated measuring device to align machine bearings along a tensed wire.
WALTER UHL TECHNISCHE MIKROSKOPIE GMBH & CO. KG
Germany
Punching of registration holes in light sensitive films for PCB manufacturing. Reference marks are automatically detected by 4 cameras with image processing. The film is aligned by 3 motorized axes (X/Y/?) and a specific pattern of registration holes is punched.
WALTER UHL TECHNISCHE MIKROSKOPIE GMBH & CO. KG
Germany
The Rod Microscope SM is a multifunctional testing instrument for applications where magnifying-glasses are not suitable any more. It is put directly on the specimen to be measured / inspected. Several configurations are available: with light transmissive base stand with battery lighting in the aluminium base stand with battery lighting and small base stand to measure hardness indentations
