Measuring equipment - Import export

-Static Pressure Test Equipment -LOSS OF PRESSURE TEST EQUIPMENT -WATER METER ENDURANCE (ABRASION) TESTING EQUIPMENT -HEAT METER DURABILITY TEST EQUIPMENT -DOMESTIC WATER METER TEST AND CALIBRATION EQUIPMENT -WOLTMAN WATER METER TESTING EQUIPMENT -HEAT METER TEST AND CALIBRATION EQUIPMENT -MOBİLE TEST UNIT

The line laser is a measuring device for aligning drive pulleys laterally, horizontally and vertically using a laser beam, preventing heavy wear to the edges of the belt. Laser beam range approx. 5 to 10 m Laser class 2 (EN 6082511997) Wavelength 630–680 mm Power < 1 mW Power supply 2 x 1.5 V (LR44) Note Never look directly into the laser beam and do not point it at other people, animals or strongly reflective surfaces. The device and the target points contain highpowered magnets. Individuals with pacemakers should not use the device due to safety reasons. Keep a safe distance away from electronic devices and wristwatches in order to prevent interference. The device must not be used in potentially explosive areas.

Oil-Mon Sensor diagnoses and monitors status of degradation, particle and water contamination of used oil in real time, which detects four factors by single sensor. Therefore, it is very important to find out root cause and take prompt action at early stage. Real-time monitoring of oil degradation and contamination with Oil-Mon Sensor can prevent catastrophic failures and extend the life of the equipment. ● Measure multiple items by one sensor (4 items) ● Can initialize and set maximum scale in the controller ● Easy to check visually the measuring values on the controller ● Alarm sounds when an alarm occurs ● Real-time data transmission by connecting to PC

This oil condition sensor measures permittivity in the oil to check oil conditions such as oil life. By detecting oil condition, it can be widely used for finding solution. - Estimate lifespan of oil to determine the optimal time to replace the lubricant - Permittivity changes against degradation, additives, contaminants, wear particles, moisture, and mixing of different oils - Decision whether to operate oil purifier to remove degraded by-products - Quick diagnosis and cause analysis of abnormality for lube oil property and contamination-related thing - Optimal lubricant selection for the equipment - Can measure oil life without consumables - Short measuring time - Can measure up to 0.01% resolution under various harsh operating conditions - LoRa wireless communication available. Data collector is sold separately - Necessary to adjust the direction of sensor probe so that oil passes through between 2 PCB on the probe.

The tension meter is used to perform a pretension test on commercially available belt systems quickly and easily by means of frequency measurement. Fully electronic and equipped with stateoftheart microprocessor technology, the meter enables precise adjustment of all V, toothed and flat belts that have to be tensioned in the range from 10 to 600 Hz. The measurement must never be performed while the drive is running The meter is not permitted or certified for use in potentially explosive areas.

The humimeter FLH hops moisture meter can determine the water content of hop bales, hops equilibrium moisture content, air humidity in a kiln or in conditioning chamber as well as long-term recording of temperature and climate data. For connection with the following external sensors: insertion probe for hops, air humidity and temperature sensor, infrared temperature sensor. For determination of water content of loose or compressed hops, hops equilibrium moisture content, air humidity of kiln and conditioning chamber, long-term recording of temperature and climate data. Quick and simple determination of water content of hops with humimeter FLH hops moisture meter.

The humimeter FL2 hay moisture tester is very well suited for producers, traders and end customers. Only the exact moisture measurement of hay and straw guarantees optimal further processing. The humimeter FL2 hay moisture tester allows a quick and easy measurement: push the hay temperature probe into the hay or straw bale, turn on the hay moisture tester and read off the water content and temperature from the LCD within seconds. The measuring values can be stored on the hay moisture tester and sent to a portable printer or PC if required. The water content is an essential criterion for the quality of hay and straw bales. That's the reason why quality control in this field becomes increasingly important. By an exact moisture measurement, you can avoid problems caused by mould and avoid paying the high product price only for water. To avoid costly mistakes due to incorrect moisture levels it is necessary to check the moisture in the manufacturing and treatment process

The humimeter RH5 paper moisture meter is a powerful moisture tester with sword probe (see picture) for humidity measurement in paper stacks. To determine humidity, the sword sensor only has to be inserted into the paper stack and left there for a short conditioning time. Via the integrated datalog the measuring values can be stored on the humimeter RH5 paper moisture meter and additional data can be added. You also have the possibility to use the Autolog function. This function automatically saves measuring values in adjustable time intervals.

Grain moisture meter for maize, rye, Triticale, wheat, barley, oats, rape, soybeans, horse beans, sunflower seeds, sorghum millet and millet, mustard seeds, buckwheat, peeled and unpeeled rice, further species on request The humimeter FS1 grain moisture tester is a powerful and handy humidity measuring instrument for grain, for determining the water content of many grain types. Thanks to the Hold function the measuring value can be frozen on the display of the grain moisture tester until another button is pressed. To increase the measuring accuracy and reproducibility, different hectolitre weight classes are stored in the device. This ensures that the bulk density doesn´t affect the measuring result. The whole grain moisture tester series is calibrated and checked according to the calibratable kiln-drying method EN-ISO 712. Simultaneously, the moisture meter for grain also measures the sample temperature and includes it in the calculation of the measuring result.

The food moisture meter humimeter FSG offers fast and reliable nondestructive measurements of the water content of various food products. Our food moisture meter comes with calibrations for numerous food products and can be calibrated for further products on request or by yourself! Calibrated for spiral noodles, peeled, unpeeled and roasted peanuts, peeled and unpeeled walnuts, peeled and unpeeled macadamia nuts, almonds. Our food moisture meter can be be calibrated for other products on request. Optionally you can calibrate it for other products yourself. Handling: To perform a measurement, simply pour the sample into the measurement chamber of the Food Moisture Meter and the device will automatically determine the water content within mere seconds. Once the measurement is done you can empty the measurement chamber and perform another measurement immediately.

The humimeter LM6 leather moisture meter is a handheld moisture meter for measuring the moisture of leather in a nondestructive manner. It is well suited for all kinds of leather and various degrees of moisture - from wet to dry leather. Handling and measuring procedure: After selecting the calibration curve for the leather to be measured, press the humimeter LM6 onto the leather surface with appropriate pressure. Water content and temperature can immediately be read off the large, well lit display. The measuring procedure does not destroy the leather surface in any way. By effecting various measurements in different areas of the leather hide, the average water content can be determined immediately. Via the integrated datalog the measuring values can be stored and additional data like supplier or batch number can be added.

Professional moisture meter for determining the water content of biomass with optional display of bulk density and bone dry weight (tons/m³) For suppliers and operators of biomass heating plants, for measuring wood chips, barks, wooden pellets, elephant grass, wood shavings, sawdust and maize cobs Your benefits: + High measuring range up to 70% water content (dependent on the material) + Bulk density compensation by integrated scale + Display of bulk density and ATRO tons/m³ + measurement within seconds without prior treatment of sample + quick and fully automated measuring procedure + outstanding accuracy due to high sample volume + bulk density compensated + wide range of calibration curves