Additives - Import export

Latex formulated with polymers in aqueous dispersion which, pure in some cases, serves as an adhesion bridge, and in other cases, mixed with hydraulic mortars, improves their flexibility, their impermeability, their adhesion and their resistance to compression and traction.

Our dry concrete is produced using marble aggregates extracted from our underground quarry, resulting in exclusive properties and a high level of quality to meet the most demanding needs of our clients. - Beton sec H-25 - Béton sec léger - Béton sec autoplaçant H-25 / AR12 - Béton FAST & EASY

12/25 Pebble (Siliceous River Gravel) Mix (Sand + Gravel) 12/20 Gravel Big Bag

- Washed Natural Sand 0/4 - Washed Natural Fine Sand 0/2 - Marble Sand - Marble Powder - 6/12 Chickpea Gravel (Crushed Gravel)

Dry concrete with a fine finish supplied in an ecological bag that dissolves in the presence of water, leaving the physical and chemical properties of the concrete intact. This system offers cleaner working conditions because it does not generate dust, safer because it avoids possible injuries when opening the bags and inhalation of dust, more sustainable because it does not generate waste and faster.

It is a conglomerate of crushed marble aggregates, lightweight aggregates and cement, bagged in a dry state so that the user, by mixing it with the indicated water, obtains a low density concrete of adequate and constant quality.

It is a conglomerate of marble and cement aggregates, bagged in a dry state so that the user, by mixing it with the indicated water, can obtain a mass concrete, reinforced or pre-contracted, of adequate and constant quality.

It is a conglomerate of marble and cement aggregates, bagged in a dry state so that the user, by mixing it with the indicated water, can obtain a mass concrete, reinforced or pre-contracted. Of adequate and constant quality.

Single-component powder mortar based on cement, marble and silica aggregates, synthetic resins and special additives that reduce water absorption and permeability and give it optimum workability and docility for its application, as well as being characterized by very high abrasion, high compressive strength, as well as an ideal fineness for a smooth finish.

Decorative mortar in microcement; single-component powder based on cement, marble and silica aggregates, synthetic resins and special additives that reduce water absorption and permeability and give it optimum workability and docility for its application.

Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready to use for interior and exterior use, with inert fillers that give it a textured surface.

Smoothing compound provides a fine finish with strong adhesion.

Industrial mortar composed of cement, lime, marble aggregates and special additives that give it good impermeability and breathability. It can be applied manually or using a spraying machine

Industrial mortar composed of cement, lime, marble aggregates and special additives that give it good impermeability and breathability. It can be applied manually or using a spraying machine.

Industrial mortar composed of cement, marble aggregates and special additives that reduce water absorption and permeability and give it optimum fluidity for manual and mechanical application, for daily use.

Industrial mortar composed of cement, marble aggregates and special additives which give it optimum fluidity for manual and mechanical application, for daily use.

Pre-dose active mortar for the protection of ferrous reinforcements; stabilizes the rust present, thus protecting the surface from future corrosion. It hardens quickly and restores a high pH around it to protect the concrete.

Pre-dose cement-based mortar with corrosion-passivating additives, fast-hardening and reinforced with synthetic polymers.

It is a product based on hydraulic binders and special additives that give it a very fast setting and hardening and a high mechanical resistance. This mortar is ideal for repairs and compromised anchors.

Single-component, thixotropic, fast-setting mortar, reinforced with polymer fibres. It has compensated shrinkage and has high mechanical strength and adhesion. It incorporates corrosion inhibitors.

SUPERFLEXIBLE mortar for WATERPROOFING all types of construction surfaces, whether or not they are subject to deformation.

Flexible single-component mortar that protects and waterproofs all types of construction surfaces, concrete or mortar in the presence of water or humidity. Its flexibility allows it to cover microcracks that form in concrete subjected to deformation. Strong adhesion, impermeability, no shrinkage and excellent workability.

Two-component elastic mortar that protects and waterproofs all types of construction surfaces, concrete or mortar in the presence of water or humidity with a ceramic finish. Its flexibility allows it to cover micro-cracks that form in concrete subjected to deformation. Very high flexibility, high adhesion, waterproof, no shrinkage and excellent workability.

Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready for indoor and outdoor use, with inert fillers that give it a textured surface. USES FIXMAR PRIMER GR is an adhesion promoter suitable for improving the adhesion of any type of plaster or coating on concrete, brick, lightweight block or plaster supports, as well as on non-absorbent supports such as ceramic floor coverings. On walls and floors. Suitable for application on non-absorbent supports such as ceramic floor coverings with subsequent installation of ceramic or natural stone coverings. On porous cement, anhydrite or sand screeds, FIXMAR PRIMER GR primer acts as a fixer of dust residues, facilitating the correct adhesion of a self-leveling mortar. Acts as a pore cover.

Self-levelling mortar based on cement, reinforced with fibres, modified by additives that give it the ability to be fluid and pumpable, especially intended for screeds and levelling of coverings with a thickness between 5 mm and 50 mm, which, once hardened, must be covered with coverings. USES Applicable on concrete or cement mortar supports. On supports with low porosity, apply a Fixmar Primer GR bonding primer beforehand. Regularisation of continuous screeds. Ideal in situations where a flat surface is required as a support for the subsequent application of another type of covering, such as parquet, carpet, ceramic, linoleum, ceramic materials, marble... Suitable for underfloor heating and as a finishing product for synthetic coverings.

Colored adhesive joint for sealing joints from 0 to 15 mm, with high resistance to abrasion and reduced water absorption. USES Seal joints between floor and wall tiles, both indoors and outdoors. Suitable for all types of ceramics and stones. Suitable for filling swimming pool joints.

The tile adhesive is a high-performance, single-component adhesive cement, designed, developed, and manufactured with selected marble aggregates, cement, synthetic resins, and other specific additives that provide it with excellent adhesion properties, as well as great flexibility and negligible slip. It is particularly suitable for use in thin layers, with low-absorption and large-format ceramic materials, for facades, high-traffic floors, and floors with underfloor heating. - Professional Adhesive C1T - 25kg Bag. (56 per pallet) - Porcelain Adhesive C2TE - 25kg Bag. (56 per pallet) - Flexible Adhesive C2TE S1 - 25kg Bag. (56 per pallet) - Flexible Gel - 25kg Bag. (56 per pallet) - SuperFlex Flexible Adhesive C2TE S2 - 25kg Bag. (56 per pallet)