Fixmar Primer GR
Description
Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready for indoor and outdoor use, with inert fillers that give it a textured surface. USES FIXMAR PRIMER GR is an adhesion promoter suitable for improving the adhesion of any type of plaster or coating on concrete, brick, lightweight block or plaster supports, as well as on non-absorbent supports such as ceramic floor coverings. On walls and floors. Suitable for application on non-absorbent supports such as ceramic floor coverings with subsequent installation of ceramic or natural stone coverings. On porous cement, anhydrite or sand screeds, FIXMAR PRIMER GR primer acts as a fixer of dust residues, facilitating the correct adhesion of a self-leveling mortar. Acts as a pore cover.
- Additives, cement and mortar
- Beton Aggregates
- Bagged Beton
Product characteristics
- Densite
- 1,4±0,1 g/cm3
- pH
- 8
- Consommation
- 0,2-0,3 Kg/m2
Similar products from B*BATI
B*BATI
Spain
Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready to use for interior and exterior use, with inert fillers that give it a textured surface.
B*BATI
Spain
Cement-based self-levelling mortar for low thicknesses 5-20 mm, type CT-C30-F7-A22, made with marble aggregates and special additives that give it optimum fluidity, to be used for the regularisation, repair and levelling of paving slabs. It is a product with high mechanical resistance and a good surface finish, ideal for the creation of continuous screeds. This mortar can be applied on a wide range of supports such as concrete, cement screeds, anhydrite, ceramic or natural stone, both indoors and outdoors.
B*BATI
Spain
Industrial mortar composed of cement, lime, marble aggregates and special additives that give it good impermeability and breathability. It can be applied manually or using a spraying machine.
B*BATI
Spain
Self-levelling cement mortar modified with additives that give it the ability to be fluid and pumpable, especially for screeds and levelling of coatings with a thickness between 5 mm and 20 mm that, once hardened, must be covered with coatings. USES Applicable on concrete or cement mortar substrates, on low porosity substrates, apply previously a Fixmar Primer GR bonding primer. Regularisation of continuous screeds. Ideal in situations where a flat surface is required as a support for the subsequent application of another type of coating, such as parquet, carpet, ceramic tiles, linoleum, ceramic materials, marble... Suitable for underfloor heating and as a finishing material for synthetic coatings. Not suitable for wear surfaces.