Revemar Thick Coating GP-CSIII-W2
Description
Industrial mortar composed of cement, lime, marble aggregates and special additives that give it good impermeability and breathability. It can be applied manually or using a spraying machine.
- Additives, cement and mortar
- Beton New
- Aggregates Beton
Product characteristics
- Compressive strength
- 3.5 to 7.5 N/mm2
- Adhesion to concrete support
- > 0.40 N/mm2 (type a/b)
- Water absorption by capillary action
- > 0.20Kg/(m2 min 0.5)
- Maximum thickness
- 15 mm
- Minimum thickness
- 5 mm
- Thickness per layer
- 15 mm, maximum two layers
- Consumption
- 18 ± 1 Kg/m2 par cm
Similar products from B*BATI
B*BATI
Spain
Cement-based self-levelling mortar for low thicknesses 5-20 mm, type CT-C30-F7-A22, made with marble aggregates and special additives that give it optimum fluidity, to be used for the regularisation, repair and levelling of paving slabs. It is a product with high mechanical resistance and a good surface finish, ideal for the creation of continuous screeds. This mortar can be applied on a wide range of supports such as concrete, cement screeds, anhydrite, ceramic or natural stone, both indoors and outdoors.
B*BATI
Spain
Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready for indoor and outdoor use, with inert fillers that give it a textured surface. USES FIXMAR PRIMER GR is an adhesion promoter suitable for improving the adhesion of any type of plaster or coating on concrete, brick, lightweight block or plaster supports, as well as on non-absorbent supports such as ceramic floor coverings. On walls and floors. Suitable for application on non-absorbent supports such as ceramic floor coverings with subsequent installation of ceramic or natural stone coverings. On porous cement, anhydrite or sand screeds, FIXMAR PRIMER GR primer acts as a fixer of dust residues, facilitating the correct adhesion of a self-leveling mortar. Acts as a pore cover.
