Watertight - Import export

Cygnus ultrasonic hatch cover weathertightness tester has been ABS type approved and accepted by P & I clubs. This ultrasonic hatch cover testing device is used to perform quick and effective evaluation of cargo hold hatch covers and door seals to determine water leaks and weathertightness. This ultrasonic leak detection system allows inspections to be carried out with cargo in place or in subzero temeprature, replacing traditional and unreliable methods such as hose testing. The Cygnus Hatch Sure system comprises of 2 parts a battery powered transmitter containing 19 ultrasound emitters (40 kHz) which are arranged to produce an omnidirectional sound field uniformly distributed throughout the cargo hold; and a receiver which displays the sound energy level that passes through gaps in the enclosed cargo hold to enable the location of leaks to be quickly and accurately identified.

Equipped with handle and wheels. TANK FOR LIQUID COLLECTION SERIES FPB821/822R - WITH WHEELS The containers of polluting liquids must be stored in a safe manner, in order to prevent contamination of the aquifers in particular. The collection tanks are watertight, oven-painted with epoxy powders and the support surface is in hot-galvanized grating. Models equipped with highly smooth wheels can be easily moved inside the storage areas. The lateral safety bulkhead makes them suitable for storage. They can be lifted with a forklift or a pallet truck.

TIPPING CONTAINERS Tipping containers in steel sheet painted watertight, with the base fork mounted for lifting with a forklift. They are supplied in series with settling tank, filter sheet for the separation of liquids or solid substances and cap for the discharge of liquids. The reversal is automatic and is done via the release lever. A rope is used to activate the lever directly from the cab of the truck and then to operate in maximum security. All containers are equipped with wheels for manual handling. On request they can be equipped with feet.

A closed end rivet The rivet body of the GESIPA CAP ® blind rivet is absolutely air and watertight. Liquids cannot seep through, could however seep around the set rivet, if the setting hole is too large. Therefore great care must be brought to fullfi lling the hole tolerances. The GESIPA CAP ® blind rivet – The structure For technical reasons, the rivet mandrel of the GESIPA CAP ® blind rivet must be fi xed in the rivet body. However this means that the rivet body can only deform slightly during the setting process. As a result, the cap blind rivet only has marginal hole fi lling capability. However this is necessary to be able to compensate large bore-hole tolerances. The GESIPA CAP ® blind rivet – Tight connections with care The above-mentioned technical situations make careful preparation of the application imperative. The hole diameter should be as tight as possible to ensure a fl awless function in the application for a long period.

The multi-composite frame is specifically suited for freezer applications as the composite material has a low conductivity for temperature. The frame is specially constructed to create a natural thermal barrier. The C FREEZER 5 is installed inside the freezer area. Double insulated triple-layer curtain The C FREEZER 5 has a flexible triple-layer curtain with integrated air mattress (U = 1,97 W/m².K) to reduce conductive temperature loss through the curtain. The sides of the curtain have additional sealing flaps for an enhanced peripheral closing on the vertical side guides. Thanks to this design, no additional sliding door is required for overnight closing.

Bi-directional shrinkage: his is determined during production by the choice of the extruder and the blow ratio. As a result, the shrinkage properties and the mechanical properties of a film are determined. VeriSafe ® films have similar contraction strength, both vertically and horizontally. This is unique on the market and gives our film unique features: - by heating - resulting in a perfect clamping of the film and also a permanent shrinkage force for a long time and therefore a super resistance to gusts of wind (guarantee up to 10 Beaufort). Welding properties: are determined by the raw materials used, as well as the capacity of the extruder. The welding is very important and must be permanent for long time. Welding's which dissolve over time weaken the tension of the film and thus also the stability of the work. Puncture resistance: this is determined by the blow grade of the extrusion and by the chemical composition.

CENTER UNITUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT Suited for outdoor use - for fixed laying in cable ducts, conduits or direct burial

LOOSE TUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT, SLIGHT RODENT PROTECTION, HALOGEN-FREE, FLAME RETARDANT Suited for indoor and outdoor use - for fixed laying in cable ducts, conduits or direct burial

CENTER UNITUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT, SLIGHT RODENT PROTECTION Suited for outdoor use - for fixed laying in cable ducts, conduits or direct burial

CENTER UNITUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT, RODENT PROTECTION Suited for outdoor use - for fixed laying in cable ducts, conduits or direct burial

Product Features: • Very economical - thick wall - diecast aluminium - watertight electronic instrument enclosure. • Rugged, diecast aluminium alloy (tough - yet easy to machine). • Two piece "tongue and groove" construction for protection against access of dust and water. • Ideal for repetitive opening and closing. • Easy to wall mount using "through box - blind hole" construction (on all sizes except: 1550Z102, 1550Z115 and 1550Z120). Access to blind holes is outside of gasket ring for superior protection. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside and out). • Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws - into factory tapped holes.

Product Features: • Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure. • Two piece "tongue and groove" construction with a replaceable one-piece silicone rubber gasket provides protection against access of dust and water. Gasket supplied loose inside the enclosure (not pre-installed). • Gasket has a temperature rating of -40C to +150C. • Ideal for repetitive opening and closing. • Four recessed stainless steel machine screws secure lid into tapped holes. • Easy to wall mount using "through box - blind hole" construction, outside of gasket protection. • Lid screws are self captivating (lid holes are threaded with the first installation of lid screws). Note: Except for 1590Z060, 1590Z061, 1590Z062 and 1590Z063. • Designed to meet IP68. • North American Mark of Safety - cUL and UL listed. Certified to Type 4, 4X, 6, P.

Product Features: • Watertight - heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from one piece, extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded aluminium body includes a recessed area for labels or membrane keypad. • End panels are rugged - yet easy to machine - diecast aluminium with full perimeter self-adhesive gaskets. • Designed to meet IP65. • Choice of two versions - end panels without flange or with flange (for shelf or wall mounting).

Product Features: • Designed for harsh industrial environments or outdoor applications (security, outdoor wireless, controls, etc, etc). • Ideally suited for mounting printed circuit boards, panels or DIN rail mounted components. • Designed for wall mounting. Interior is secure as lid screws are behind the lid. Can be made more secure if wall mounted with security screws (tamper resistant screws). • Satin texture finish with smooth recessed surface on lid for a membrane keypad or label. • Standoffs moulded in the interior of the lid and enclosure - designed for #4 x 1/4" self tapping screws (Part number 1555TS100). • Choice of two materials: • General purpose ABS plastic (material carries a UL flammability rating of UL94 HB). Not recommended for outdoor use • Polycarbonate (material carries a UL flammability rating of UL94 5VA @ 3mm) - Recommended for outdoor use • Colour is a light grey (RAL 7035) to help keep heat absorption down.

Industrial plugs and Sockets

Gaskets are necessary to guarantee watertightness of the tunnel and avoid water infiltration in the bridge segments. Almost 20 million metres of gaskets supplied for railway, underground, road and hydraulic tunnels prove FIP INDUSTRIALE technical skills and production capacities. FIP INDUSTRIALE gaskets are made of EPDM, CR-SBR, NBR and HYDROEXPANSIVE RUBBER. FIP INDUSTRIALE manufactures both compact gaskets with hardness from 50 to 80 Shore A, and foam gaskets with various densities. The gaskets can be supplied in continuous extrusion or in frames with 4 or 6 corners moulded to the profile. EPDM water-tight gasket. Durability and unchangeability over time of FIP INDUSTRIALE gaskets are guaranteed by the special rubber compounds used and by severe laboratory testing simulating actual service conditions. The dimensions of the gasket, the profile, the type of rubber and its physical and mechanical characteristics can be specified at the design stage based on the service conditions:

This equipment was developed to test watertight function in grommet using an air pressurized chamber to simulate real conditions of water pressure applied to grommet, without destroying or causing damage to the electrical harness wires. It includes a workbench with a sealed chamber and an electrical cabinet with interface and control device. Features: - Different types of chambers available: Acrylic or Inox - Different chambers sizes available - Multi chambers available with optional independent chambers test - Exchangeable test plates, allowing to test several grommets in the same equipment by exchanging the test plates only - PLC e HMI – Interface and control - Test by: pressure; vacuum; pressure & vacuum; or pressure & water for visual inspection - Tests up to 500 mbar - Scanner, printer and RFID integration - Adjustable test parameters (test pressure, min pressure, time limit, etc) - Tests results statistics - User ID