A closed end rivet The rivet body of the GESIPA CAP ® blind rivet is absolutely air and watertight. Liquids cannot seep through, could however seep around the set rivet, if the setting hole is too large. Therefore great care must be brought to fullfi lling the hole tolerances. The GESIPA CAP ® blind rivet – The structure For technical reasons, the rivet mandrel of the GESIPA CAP ® blind rivet must be fi xed in the rivet body. However this means that the rivet body can only deform slightly during the setting process. As a result, the cap blind rivet only has marginal hole fi lling capability. However this is necessary to be able to compensate large bore-hole tolerances. The GESIPA CAP ® blind rivet – Tight connections with care The above-mentioned technical situations make careful preparation of the application imperative. The hole diameter should be as tight as possible to ensure a fl awless function in the application for a long period.
SFS GROUP GERMANY GMBH
Germany
BULB-TITE® blind rivets – The advantages • Large grip range • Vibration-proof • Use on straight and curved application parts • Waterproof with neoprene sealing washer • Large distirbution of the grip force over a large surface
Request for a quoteSFS GROUP GERMANY GMBH
Germany
Up to 60 rivets per minute! – Endorsed by major customers! GESIPA® speed rivets are a cost-effective alternative to automation. Speed rivet technology is a joining method that requires access from only one side and which enables fast cycle times thanks to the preloaded rivets and automatic feed. Advantages • Large grip range • Reduced variation • Optimum hole filling capabilities and bearing stress • Ideally suited for transferring shear strengths with moderate clamping force • Ideal for: — LED light strips — Electronic/pcb assembly — Lightweight sheet metal structures — PC housings — Rating plates — Blind holes
Request for a quoteSFS GROUP GERMANY GMBH
Germany
Up to 60 rivets per minute! – Endorsed by major customers! GESIPA® speed rivets are a cost-effective alternative to automation. Speed rivet technology is a joining method that requires access from only one side and which enables fast cycle times thanks to the preloaded rivets and automatic feed. Advantages of the Speed Bulb® • Optimally adapted to specific grip range • Distinct bulb formation — High grip force — High pulling force • For higher loads • Ideally suited for transmitting shear and tensile forces • Ideal for: — Higher dynamic loads — Sheet metal structures — Electrical devices — White goods
Request for a quoteSFS GROUP GERMANY GMBH
Germany
Working range Blind rivets up to 4 mm Ø all materials. Not suitable for stainless steel CAP® blind rivets. Technical data Weight: 1.2 kg Operating air pressure: 6 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: 0.8-1.2 ltr. per rivet (0,2 ltr. compr. air) Traction power: 5.200 N at 5 bar Stroke: 15 mm Nosepieces/accessories Nosepieces: 16/18, 16/24, 16/27 and 16/29 1 set of jaws, 1 spent mandrel bottle, 1 wrench each of MSU and MSZ, Maintenance instructions with spare parts list Features • Hydraulic head in aluminium with wear-proof cylinder surface • Pneumatic cylinder made of die cast aluminium • The piston made of hardened and hard chromium plated steel make the device easy to handle and wear-proof • Compact seals are wear-proof for a long service life • Fast venting valve for fast return and high working sequence • Low-noise pneumatic switching • Simple, low-interruption valve design • Hydraulic head can be adjusted by 360°
Request for a quote