Uv lamps - Import export

In addition to a proper ventilation system, UV-FLOW germicidal ultraviolet (GUV) light fixtures inactivate microbes in an area’s upper environment, helping to prevent the spread of any airborne infection. Thanks to its unique design it is safe to operate 24/7 in occupied and crowded spaces. 4 highly efficient selective UV-C pure quartz lamps at 253.7 nm. • Pure mirror bright aluminium parabolic reflector • 360 Degree Beam Pattern • All materials used are tested to resist intense UVC radiation • Specific electronic ballast for UV-C ray lamps • Protected against dust and water (IP55) • CE trademark (LVD 73/23 – EMC 89/336 – MD 93/42) • Complies with the noise standards of Directive 2006/42/EC • Values measured according to UNI EN ISO 3746 • Non-detectable and non-transmissible vibration values • Suitable for class 1 installations – protected areas

Applied inside ducts, or in the final section of AHU (Air Handling Unit), Retrofit UV In-duct system creates a UVGI barrier that inhibits the proliferation of viruses, bacteria, moulds and spores settling inside Air Conditioning Systems and very dangerous for health. UV-RACK purifies homogeneously the airflow running through its powerful lamps, eliminating the microbial load and the spreading and distribution of dangerous and annoying pathogens inside buildings. In AC systems an unpleasant biofilm covers usually all inner surfaces as the result of microorganisms combination and favourable conditions for their proliferation, such as temperature changes, high humidity and darkness. Retrofit UV-RACK inhibits the creation of this biofilm increasing Indoor Air Quality and comfort. More specifically, the use of retrofit UV-RACK eliminate important issues related to AC Systems and deadly illnesses (such as Legionella Pneumophila, Tuberculosis, Flu, etc.

elight Company, Inc. designs, manufactures, and internationally distributes a wide range of high-quality special replacement mercury, gallium, iron and other metal halide bulbs. Also known as ultraviolet curing, drying, or graphics arts lamps. Medium pressure bulbs are used to cure inks and adhesives quickly and consistently. Ultraviolet curing uses less energy than conventional drying methods, and minimizes VOC emissions. We are supplier of quality direct replacement for series of printing equipment and uv ovens ncluding Gallus, Mark Andy, GEW, IST, Brewer, and more. Applications: Adhesive setting CD & DVD curing Exposure Equipment Graphics Arts Printing Inkjet Systems Label Printing Photochemical Lamps & Wells Portable Curing Equipment Printed Circuit Boards Roller Coaters Screen Printing

DPL Cold UV curing system is much more than just products. In the past 20 years, DPL is focused on researching and developing cold UV curing to help our clients improving their printing speed and quality. Why need Cold UV curing system? Compared with other heating methods, reducing UV curing temperature can help improving printing quality. Cold UV curing temperature can also help to improve UV lamp bulb ‘s working lifetime. By our pattern design lamphouse, the general lifetime of our UV lamp bulb is over 2000 to 3000hours. On the other way, the lower curing temperature is good for curing UV lacquer on the thermally sensitive material. For example, even for printing base film as PET film, lower curing temperature will help improving printing accuracy.

Penetrant non-destructive testing method is a system that is used for the detection of cracks in the surfaces of parts. After the material which is going to be subjected to penetrant test is pre-cleaned, it is subjected to penetrant application as dipping or spray. After this process, the material is rinsed and dried. Powder “developer” is applied electrostatically on the dried material. Finally, possible cracks and faults on the material are detected by checking under the UV lamp.

Dymax UV and visible radiometers are easy to operate and allow operators to monitor and document a UV/Visible light curing process. Features: - Helps lightcuring system maintain consistent intensity and dosage levels - Provides a worker friendly lightcuring process by measuring stray or reflected energy - Measure the light intensity transmission rate through the substrate to ensure an effective cure

LED SpotCuring System Higherperformance, flexible operation with TouchScreen Interface. Features: - One controller controls up to four LED heads for maximum application flexibility - LED heads for 365, 385, or 405 nm wavelengths for better compatibility with different lightcurable materials - Improved, flexible LED heads can be programmed independently for accurate curing - Individual exposure times and intensity settings available in 1% increments for each LED head allows for maximum curing flexibility - Interchangeable/replaceable focusing lenses in 3, 5, and 8mm diameters that allow tailoring of the unit to your curing requirements - Instant on/off – no warmup period and more energy efficient - Efficient LED temperature management for continuous operation without overheating and comfortable handheld operating temperature - PLC touch screen interface that is easily incorporated into automated systems

HighIntensity lightcuring with patented intensity adjustment technology. Features: - >17,000 mW/cm² initial intensity - Patented intensity adjustment feature - Easy to use and adjust - Easytoread, lighted front panel LCD display - Improved user interface for easier operation - Up to 2,000 hours useful bulb life - Compatible with liquid, fiber, singlepole, or multipole lightguides - Integrate with pedal or PLC - Extended exposure time settings to 9,999.9 seconds - Controlled powerup sequence ensures proper temperature - Integral shutter with digital timer - Fast bulb replacement - Proprietary “Cool Blue™” filter virtually eliminates lightguide degradation - Smooth front panel for easy cleaning

- Product name: Air Doctor air purifier - Model name: AC-10 - Manufacturer: APC TECH CO., Ltd / Korea - Air Cleaning Method : Axial Photocatalyst air cleaning technology - Color : Grey ,Red, Yeollow , Black - Size : 185mm*120mm - Weight: 0.95kg - Area for exclusive use: 3sq~5sq - Installation type : Stand type - uv lamp life : about 50000hours - Main Components : Axial Photocatalytic Reactor , composite filter (carbon+hepa) - Power consumtion: 3W - Operational Voltage: DC5V - Small air purifier / 0.92kg - Excellent performance by photoluminescent photocatalytic reactor (Patent No.10-09565105) - Patent (Small air purifier) / Patent No.10-1781119 - USB Port / Portable battery available

max. size 75 x 106 cm age 2016 5 printing units + coating unit (chamber duct) + extended delivery max. 18.000 sheets / h (off-load) Prinect Press Center Prinect Inpress Control Prinect WallScreen Hycolor film dampenings ink unit temperature control cooling unit CombiStar (water-cooled) Autoplate Pro - fully automatic plate change automatic washing devices Preset Plus feeder and delivery ink agitatiors ink-fog vacuum device dry sprayer PowderStar AP 262 antistatic device StaticStar CoatingStar varnish supply system UV Dryer Heidelberg DryStar iron spiked UV lamps 1 UV interdeck dryer full flexibility for UV interdeck dryers 2 UV dryer in delivery central air cabinet AirStar Pro (water cooled) shown totalizer: approx. 20 mill. impressions Delivery time: immediatelly from stock Ref: HE230309T Please ask for price. We ship and install worldwide!

The B300 unit offers the best humidification in its segment. The B2300 mates superior appealing design with class leading technology to render a revolutionary humidifier that is purposed to the highest grades while combining unobtrusively into its stylish ambiance. There are however a few who would agree that the fetching form of the B300’s and the modern design even make it a masterpiece in its own right. Needless to say, the B300 is not just a glamorous humidifier from the outside, it is an extremely efficient piece of technology that is engineered to cater to the needed of extremely critical users who has a precise perspective of what they want when they decide to invest in a product that is made in Germany. Practical advantages: High-performance humidifier with multistage fan and large-sized water tank UV lamp for the effective disinfection of the service reservoir Fully-automatic operation electronic control via moisture sensor

The B 500 Humidifier radio is a blend of wireless humidifying, cleaning and filtering. The unit is equipped with a fully automatic four-stage radial fan that offers a noise free and extremely efficient operation. The unit is designed to offer versatile adjustments as per need. The wireless sensor measures up to a distance of 30m delivering highly accurate and stable measuring results. The sensor is to be fitted with battery and placed within a suitable measuring area¹ on a wall or a ceiling for automatic operation. The sensor measures and monitors the relative humidity at regular intervals and control the humidifier up to 30 meters distance. An acoustic signal indicates for battery change during low battery. Benefits in practice: Infrared remote control for a safety operation: unauthorised personnel cannot tamper with the settings on the device UV lamps for an effective disinfection of the water reservoir (optional)

Healthy air and wellness for the airwaysBreathe deeply and feel healthy! Thanks to a combination of refreshing humidification, permanent air purification and room air aromatization, the ultra-silent 3-in-1 ultrasonic humidifier B 7 E helps to improve the room air quality and maintain a healthy indoor climate with a wellness factor. The room humidity level is regulated fully automatically to a healthy comfort range (40 – 60 %), freed from dust, pollen and unpleasant odours in the integrated carbon air filter and, if desired, additionally aromatized with a subtle fragrance. The UV lamp in the water tank keeps the water clean and up to 97.9 % free from germs. Why is air improvement necessary at all? Whether we feel comfortable at home, sleep through the night or are receptive and productive at the workplace depends decisively on the quality of the room air.

The professional air purifier with 3 filter stages and UV-C light frees the air reliably from aerosols, bacteria, pollen and viruses. Particularly suitable for large rooms with a high footfall, such as doctors' surgeries, fitness studios, open-plan offices and kindergartens. The device consists of a powerful fan with a 3-stage filter unit. The air is sucked in and passed through a pre-filter past UV-C lamps and then passes through the built-in HEPA filter (HEPA - High Efficiency Particulate Air Filter Class H14). Noise level in dB: 25% - 43 dB 50% - 51 dB 75% - 59 dB 100% - 61 dBAttention: Only our original filters guarantee safe use!

Air purifiers for the targeted improvement of air quality in large public and commercial areas (including canteens, refectories, retirement homes, cinemas, open-plan offices, fitness studios, etc.) In the basic version, filtration is carried out by a 2-stage filter system consisting of a pre-filter and aerosol filter (HEPA filter). Optionally, the device can be equipped with a switchable UV-C lamp. Due to the extremely high air exchange rate of 5000 m³/h, the PLR Max is ideally suited for halls, halls, event rooms, canteens. Equipped with stable castors, the PLR Max fits through any standard door and is therefore mobile. AREAS OF APPLICATION - Medicine (group practice, laboratory) - Public (retirement home, nursery school/nursing home school, museum) - Commercial (open-plan office, cinemas, dance studios, restaurant) APPLICATION SPECTRUM - Aerosols, viruses and bacteria - Allergens (mould spores, pet hairs, house dust mites, pollen, dust)

The handheld UV lamps are high-powered UV radiation sources for UV-A and UV-C radiation. They enable the sensitive detection of luminescent substances through their high irradiance. The handheld UV lamps are available in three versions. UV-A and UV-C lamps are equipped with two UV lamps to obtain a very high intensity of irradiation on the sample. The UV-A/C handheld lamp allows the simultaneous or separate application of UV-A and UV-C radiation with the same device. All handheld UV lamps are mains operated and have VIS filters, which effectively filter the visible light from the tubes. Thus, even weak luminescence in the sample can be optimally detected. We recommend our additional stand to create a table lamp and have both hands free for testing. HIGHLIGHTS OF UV HAND-HELD LAMPS High irradiance of ~ 500 µW/cm² in a distance of 10 cm Filters for visible light from the tubes Weak luminescence can be detected Long lifetime Optional: Switchable UVA and UVC emission

With the UV LED series L, we combine the benefits of the UV LEDS compared to the UV lamps; these are initial start, dimmability, long service life and a lower heat input with an economical UV LED system. Irradiances of up to 5,5 W/cm² are reached on the surface. The high irradiance enables short processing times. For different applications, wavelengths of 365nm, 385 nm, 395 nm, 405 nm, and 450 nm are available. That way, the UV LED series L can be optimal customized for the requirements of the photoinitiator. All wavelengths are available in five differently sized illumination areas from 10 x 100 mm, and 30 x 30 mm up to 200 x 100 mm. Customized versions are available too.

The use of ultraviolet-curing adhesives and compounds is constantly increasing. With the LedControl S UV LED controller, you remain flexible for future requirements. Due to the modular design, one UV LED lamp, up to five or even up to 16 UV LED lamps with different wavelengths can be operated and individually adjusted with one LEDControl S. For applications such as bonding, potting or fluorescence excitation, the wavelengths 365, 385, 395, 405 and 450 nm are available. With the variety of wavelengths, you remain particularly flexible and can upgrade and change over at any time. With several UV LED lamps, the irradiation can also be ideally homogenized to achieve the best possible uniformity. With the intelligent UV LED control, the power of the ultraviolet LED lamps can be individually adjusted between 2% and 100%. A timer for irradiation times between 0.01 s and 9999 s is already integrated.

The radiometer RM-12 is a precise, hand-held device for measuring irradiances and illuminances. Due to the sensor-integrated electronics, different sensors for UV and visible spectral ranges can be measured with the respective sensors. Sensors evaluating biological effects of irradiation are also available. The integrated diffuser serves to provide the cosine correction that is necessary with non-perpendicular irradiation. The sensors are calibrated with traceability to the PTB; after being calibrated, they are supplied with a factory calibration certificate. Repair and spare parts service is, of course, available for many years. The sensors can be supplied with different measuring ranges. APPLICATIONS: Measurement of UV lamps, UV LEDs, and light sources Controll of UV irradiation Measurement of job security due to artificial optical radiation Photometric measurements

We are one of the very few printing houses that offer UV offset printing on various types of non-absorbent surfaces, such as foils and plastics. For this printing method, we use modern Heidelberg machines, which enable us to precisely print on any material (PVC, PP, PET self-adhesive foils, etc.) using inks that are UV-cured after application. In UV offset printing, the ink applied to the substrate is cured with ultraviolet light. Using UV lamps we can print on any type of substrate, from synthetic paper to foils or plastics, where traditional offset printing is impossible. The UV printing technique allows us to achieve an almost photographic quality of prints. The imprints have increased resistance to mechanical damage and adverse weather conditions. Another great advantage of UV offset printing is a variety of refinement possibilities. We can apply selective varnishes, hot-stamping, foils or embossing.

Chemical appearance Isopropyl Alcohol or Ethanol has a colorless and transparent appearance and comes in a liquid form which has low viscosity level. It has a density of 0.789 g / cm3. Chemical application and strength Isopropyl Alcohol or Ethanol is a chemical which has a wide range of uses. This includes the use in the manufacturing of various products like beverages, flavorings, acetic acid, fuels, and dyes. Its other uses can be determined depending on its concentration. In the medical field, Isopropyl Alcohol with a concentration between 70% to 75% is used for disinfecting purposes. Common rubbing alcohols which are used in hospitals and households are of this concentration. Isopropyl alcohol with 95% concentration and higher is not used as commonly as the 70% – 75% variant in disinfecting. Used commonly in wiping UV lamp. Used in the production of common household products like cleaners, paint thinners, and disinfectants.

High UV irradiance combined with a uniform irradiated area is the key feature of the surface LED series SFL-UV. The SFL-UV modules are water-cooled high-power UV LED sources with an intelligent LED driver. The absence of ineffective infrared radiation reduces the heat compared to conventional UV lamps. Three standard sizes are available with light-emitting areas of 100 x 100 mm to 200 x 200 mm. Customized sizes are available on request. Independent of size, we offer two versions. The HO versions reach high irradiance of up to 5500 mW/cm², while the ECO versions still offer up to 2000 mW/cm². Both irradiances are measured at a distance of 10 mm to the emitting window. The high irradiance allows extremely short processing times. Wavelengths of 365, 385, 395, 405, and 450 nm are available for many different applications.

The curelog is a precise radiometer with dose measurement and up to four spectral ranges. Due to its fast and precise measurements the curelog can universally be used for applications in the fields of lacquer curing, bonding, sterilization, disinfection, lithography and many other applications. The adjustable data recording rate of up to 2000 Hz (measurements per second) allows reliable measurements on fast running UV belt systems. The recording time of up to 180 h allows the measurement of long-lasting processes at low doses, like UV disinfection. The curelog simultaneously records up to four spectral ranges, each with a high-precision 24 bit ADC. The high-precision ADC gives the curelog a extrem high dynamic range. The resolution of 0.0001 mW/cm² and a measurement range of 50 W/cm² are the main features of the curelog. All common UV lamps and UV-LEDs can be measured and compared, no matter if spot or area lamps, fibre optics or UV/VIS LEDs are used.

The German Technical and Scientific Association for Gas and Water (DVGW) and the Austrian standardization committee have defined the requirements for UV water disinfection systems with UV low-pressure lamps in DIN 19294-1:2020-08. This also specifies the design, function and opening angle of DVGW reference radiometers. The previous technical rule W294-3 and ÖNORM 5873 continue to apply to devices for drinking water disinfection with medium-pressure lamps. The sensors are inserted into a pressurized water-tight measuring window tube, which enables simple and reproducible replacement of the sensors. With an aperture angle of 160°, our sensors are suitable for precise radiometric measurement of UVC irradiance in UV water disinfection systems. We offer these with reference radiometer RMD. The RMD as DVGW reference radiometeris one of the latest developments from Opsytec Dr. Gröbel GmbH.

Professional LED inspection and work lamp with adjustable ABS housing, 3 powerful magnets and hooks. Ideal tool in the garage, the workshop or in any dark or under-illuminated space High light intensity of 300 lumens at the side UV lamp on the top: for detecting coolant leaks, and stains on seats and carpet. Great autonomy: up to 7 hours non-stop

The AIRPURION 300 active consists of a complete housing made from stainless steel 1.4301. Wiring system and the electronic cut-in unit are integrated into the frame. The air is guided along the PURION UV-lamps inside the housing via fan. Scope of delivery of an AIRPURION active plant also contains a mounting rack or a wire suspension for assembly. advantages: continuous operation, even if there are people staying in the room not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The AIRPURION 48 active consists of a matt anodized and completely closed aluminium frame. Wiring system and the electronic cut-in unit are integrated into the frame. The air is guided along the PURION UV-lamp inside the housing via fan. Scope of delivery of an AIRPURION active plant also contains a mounting rack or a wire suspension for assembly. advantages: continuous operation, even if there are people staying in the room not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The UV-plant PURION 1000 H is made from electropolished stainless steel 1.4571. The PURION 1000 H is applied to disinfect drinking water up to a flow rate of 1.500 l/h and a transmission (or turbidity) of the water of at least 90% per T1 cm. The UV-plant PURION 1000 H has been developed for temperatures above 40 C°. The used PURION UV-lamp 42 W operates with a special Amalgam technology. Several options for monitoring of the disinfection performance are available. advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087