Threading - Import export

"We can help you with every threading types UN/UNF Thread NPT/NPTF Thread BSPP (BSP, parallel) Thread BSPT (BSP, tapered) Thread Metric parallel Thread Metric tapered Thread"

Thread standard: Metric, ISO DIN 13 Type: Round die Application: d25x9 Material of product: HSS Spiral entry: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 750 N/mm2 Standard: DIN 223 Tolerance: ISO-6g Round dies are cylindrical and are used for making external threads in one operation. They have - depending on the size - three or more cutting edges inside. The holes between the cutting edges receive the chips, roll them and discharge them. Dies are used to cut screws, nuts and threaded rods in everyday use. The die holder is used to cut the threads by hand and with the special die holders you can also attach the round die to a tailstock or to a drill. The dies can usually be used on both sides and have a perfect cut. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials

Coil Wicks : The wick should be plastered with molten paraffin and the wick holder should be attached. In large sized candles, it can also be used as a raw wick without the need for this process. ➢ Roving length; It can be cut 2-3 cm above the candle to be made. You should choose your wick according to the raw material you use and the size of the candle you will make. Roving selection recommendations according to mold diameter: Suitable for molds with a diameter of 9mm – 3.5 cm / suitable for making tealight candles; 10mm – Suitable for molds with a diameter of 5-6 cm; 12mm – Suitable for molds with a diameter of 7 cm; 14mm – Suitable for molds with a diameter of 8 cm

Compared with the machining method, thread forming excels through its higher repeat accuracy and greater strength of the threads. The FormMax solid carbide thread former by LMT Fette is made of a newly developed ultra-fine grain carbide and is tailored precisely to customers’ needs thanks to its optimized geometry. Thread quality and tool life are increased even further, as the coated tool surface is especially smooth. Furthermore, higher circumferential speeds increase the efficiency of thread forming. The tool features integrated coolant channels. The standard program covers the dimensions M4 to M12 and MF8 x 1 to MF14 x 1.5 and is available ex-stock at short notice.

LMT Fette rolling heads generate the thread or required form and then open automatically after rolling. Before the next thread can be rolled the head has to be put back into working position, means the head must be closed. The completely new designed closing clip, delivered as standard, already allows an flexible and user friendly layout of the process for closing the rolling head. Another significant optimization of the closing process can be realized with the new closing device (CCD) for EVOline. Adapted between rolling head and shank and connected with the coolant supply, closing of the rolling head can be transferred from process time to the non-productive time of the machine. Closing by coolant (or even compressed air) can be integrated in the machine program by a simple function.

With XChange from LMT Fette, with its patented interface, for the fi rst time it has been possible to combine the advantages of carbide and steel in a modular tap. Approximately 90 % of the taps used nowadays are still made from high-speed steel. This is because this cutting material is featuring the requested toughness for absorbing the torsional moment as well as the necessary load at the cutting edge when rewinding the tap. HSS, however, is having some disadvantages also, compared to solid-carbide taps: tool life and most importantly the feasible cutting speeds and cycle times are significantly lower. With XChange two physically prohibitive properties has been combined: The solid-carbide threaded head, a combination of ultra-fine grain carbide and high performance coating, is providing: - maximum tool life - and high cutting speeds The flexible steel shank guarantees - the stability of the tool - and offers extra efficiency

Kaleliler is manufacturing threaded rods, studs, anchor bolts within a range of M 12 - M 220. Vaious types of surface treatments including hot dip galvanize are applicable.

drylin® SHT-12 linear module, drylin® R hard-anodised aluminium shafts, Trapezoidal lead screw TR10x2 made of stainless steel with ball bearings, machined lead screw ends 6h9x17mm, quad blocks, aluminium shaft end support, stroke lengths in 250mm or 500mm. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

Introducing our Wooden Cap with PP DIN18 Thread, a premium sealing solution that marries natural aesthetics with functional reliability. Crafted from high-quality wood, this cap exudes an organic charm while ensuring the integrity of your packaged contents. Designed with a precision-engineered PP DIN18 thread, our wooden cap offers a secure and tight seal, providing peace of mind during storage and transportation. The inclusion of the PP material enhances durability and ensures longevity, making it ideal for repeated use. The wooden construction of the cap not only adds a rustic and artisanal touch to your packaging but also aligns with sustainability principles. By opting for wood sourced from responsibly managed forests, we contribute to environmental conservation efforts, making our wooden caps an eco-conscious choice for conscientious consumers.

Soft Cake Yarn, which is made from 50% cotton and 50% acrylic is ideal for crocheting and knitting fashion accessories. With this soft color graident yarn it is very easy to create projects like shawls, beanies, cardigans and much more. We offer you 16 different color gradients for this yarn. Out of one ball you will get easily a shawl. Now choose your favorite combination and start to create wonders. We do our best to display our colors as accurately as possible, but keep in mind that the color you see on the screen may differ slightly from the color you get.

Steel 1.0401 (C15) or stainless steel 1.4301 (whirled spindles stainless steel 1.4305). Version Steel rolled, bright. Stainless steel up to Tr 40x7 rolled, above this whirled, bright. Note Rolled, high precision trapezoidal thread spindles. ISO trapezoidal thread based on DIN 103. The trapezoidal thread spindle is a transmission thread with relatively high friction. Standard thread forms are selflocking. This has the advantage that they generally do not need to be secured in the rest position. Tolerance class 7e Pitch precision 0.3/300 mm Length sawed with excess, ends not deburred.

Steel C35Pb. Gunmetal Rg7. Plastic PA6.6 with MoS2). ISO trapezoidal thread based on DIN 103. Steel nuts for adjustments during manual operation and as fastening nuts. Not advised for use with motorised drives due to the steelsteel material combination. Gunmetal nuts for motion drives with low and medium speed. By insufficient lubrication, gunmetal trapezoidal thread nuts on steel spindles have good dryrunning properties. Plastic nuts for lownoise motion drives. Good dryrunning properties. Tolerance class 7H.

Straight from our warehouse Approx. We always have 150 different versions of threaded outlets (ANSI B 16.11 / MSS SP 97) available in our extensive warehouse in Kamen. In our warehouse we have threaded outlets with NPT threads according to ASME B1.20.1 in stock. Threaded outlets with BSP / T threads according to ISO 7-1 and with BSP / P according to DIN ISO 228 are available with short delivery times. We only deliver goods of European origin. Standards and special requests Threaded outlets are available in two pressure levels (3,000 lbs and 6,000 lbs) and in all common materials. If required, we can also supply special materials. In the case of threaded outlets, a distinction is also made between reduced and full branches. Express service We can deliver threaded outlets in stock within Germany the next day to the customer if the order is received by 11.00 a.m. Simply specify when ordering if you would like to use this express service.

Universal thread adapter for nearly all drums and other containers with opening of 48–75 mm in diameter, regardless of the respective thread. The thread adapter can be mounted quickly and easily with clamping screws and can be used for different container openings. With G2" connector thread for Bürkle drum screw connections and pumps with immersion tube diameter up to 32 mm. The container connectors make decanting even easier and safer with their more secure connection to barrels. The connectors secure the pump in the barrel, enable a vertical position change and allow the required air exchange.

Reinforced threaded inserts allow threaded holes which have been damaged, torn out or jammed to be used again or to be repaired. This makes it possible to recover scrap and rejects of expensive products. Reinforced threaded inserts are suitable for use in various materials, including light metals and casting. Inserts with internal threads larger than M6 are supplied with four locking pins instead of two. Permissible deviations: The medium tolerance class applies to the threads listed, i.e. 6H for nut threads and 6g for bolt threads. Other dimensions ±0.25 mm. With reinforced threaded inserts we also offer a version with a stronger cross-section for use in applications with greater stress. Technical information see operating instructions for threaded inserts.

Self-tapping threaded inserts for making high-strength, wear-free, vibration resistant screw connections in materials with low shear strength such as aluminium and aluminium alloys, brass, bronze, cast iron, duro and thermoplastics. The threaded inserts are tapered at the bottom and have a cutting slot. By screwing in they cut their own threads inside a receiver hole. This guarantees a completely secure and firm anchoring in the host material. Internal thread D1 acc. to ISO 6H. The threaded inserts with cutting slot spring slightly inwards in the slot region in some materials. This results in a screw locking effect. If this is not desired, we recommend the threaded inserts with a cutting bore.

Since we started to transform recycled cotton fiber into environmentally friendly yarn with a sustainable production approach, we combine the experience we have gained in the sector with the hard work and energy of our expert, young and dynamic team, and offer the most appropriate solutions to our business partners in line with their demands. Producing neither 6 - nor 30 yarns for recycling, Pak Pamuk can meet special requirements separately from the types in the color catalog. Please contact us for detailed information and color catalogue.

Since we started to transform recycled cotton fiber into environmentally friendly yarn with a sustainable production approach, we combine the experience we have gained in the sector with the hard work and energy of our expert, young and dynamic team, and offer the most appropriate solutions to our business partners in line with their demands. Producing neither 6 - nor 30 yarns for recycling, Pak Pamuk can meet special requirements separately from the types in the color catalog. Please contact us for detailed information and color catalogue.

High-strength for design and repair Coil threaded inserts or “coils” are an outstanding solution for achieving highstrength joints in parts made from low-strength materials (e.g. aluminium lightweight constructions). At the same time, high wear resistance is guaranteed. Furthermore, the inserts are ideally suited for the repair of damaged threads. Very simple handling Coils consist of a specially formed and coiled wire with a driver pin that can be removed after installation and can be fitted quickly and easily in just a few steps. Choose the right threaded insert for your application from over 500 sizes. Do you need a special form? No problem! Together with you, we can develop the required coil threaded insert and produce it in the highest quality.

The THREAD-SERT are self-tapping inserts to be installed into cylindrical holes Suitable for installation in a wide range of thermoplastics and thermosets They are particularly designed for applications that may involve a high tensile load Very easy installation, also using a simple screwdriver Available in two versions with o without head. Headed (flanged) version provides bearing surface for the mating component to prevent jack-out. This feature is also useful in applications with electrical contacts Also known as SCREW-SERT, with equivalent shape, features and dimensions

The single size installation tool for UNC helicoil thread inserts designed for manual use. Can be used for installation of all types of thread inserts, including those complying with DIN 8140, used in the aeronautics and automotive, and also those with a reduced diameter for general use It is the most popular installation tool, the same contained in the Thread Repair Kits The threaded nose prepares the helicoil thread insert to the size of the thread, making installation simple and safe. It also allows installation in difficult areas, without use of the other hand to hold the insert Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and selftapping bushes, which have always been recognized by the market as products of excellent quality

The tool for fast installation of large numbers of generally used small diameter Helicoil thread inserts It is the threaded spindle, that can be used manually or with any eletric scrwedriver. We suggest the Spiralock cordless programmable screwdriver, available in our catalog The threaded spindle guides the thread insert to the established depth, limited by the special ring Attention, this tool is not suitable for mounting DIN standard thread inserts, only those with a reduced diameter Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

The single size installation tool for metric helicoil thread inserts designed for manual use. Can be used for installation of all types of thread inserts, including those complying with DIN 8140, used in the aeronautics and automotive, and also those with a reduced diameter for general use Specially designed for thread inserts of smaller sizes M2 - M4 It has a threaded nose and rod so that the thread when inserted will be guided internally by the thread of the rod and externally by the thread of the nose before and a little bit after This installation tool prevents deformation of thread insert even if the operator exerts too much pressure, ensuring easy and safe installation Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

The Candle Thread repair kit contains long version of finishing thread insert tap, installation tool and thread inserts (see attached data sheet). All contained in a practical plastic case, easy to store and transport. For use in car and motorcycle engines Our thread repair kit is one of the most professional helicoil kits on the market. The installation tool is equipped with a threaded nose to prepare the helicoil thread insert to the size of the thread, making installation simple and safe Excellent choice for repairing damaged, span and worn threads in steel, iron, aluminum, alluminium alloys and hard plastic materials Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and selftapping bushes, which have always been recognized by the market as products of excellent quality

The Thread repair kit 4 diameters includes the most popular sizes in the various pitches available (see data sheet). For each of the four diameters the kit contains 1 finishing thread insert tap, 1 installation tool, 1 cutter and 15 thread inserts. All contained in a practical plastic case, easy to store and transport Our thread repair kit is one of the most professional helicoil kits on the market. The installation tool is equipped with a threaded nose to prepare the helicoil thread insert to the size of the thread, making installation simple and safe Excellent choice for repairing damaged, span and worn threads in steel, iron, aluminum, alluminium alloys and hard plastic materials Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and selftapping bushes, which have always been recognized by the market as products of excellent quality

The thread restorer for internal thread is an indispensable tool for professional thread maintenance. Nes thread repair restores old threads efficiently and precisely without changing the original structure. Regardless of the thread pitch, the thread restorer removes rust with its robust, hardened cutting blades and cuts the old thread at the head end. The restorer thus has a similar function to a screw tap, except that it cannot be used to cut a completely new thread and severaldimensions can be processed with one tool. Nes thread restorer is characterised by its simple handling, which makes it unnecessary to align or measure the thread. Due to the possibility of clockwise and anti-clockwise rotation, threads can be re-tapped flexibly. The tool is applicable for metric and inch sizes with 55° and 60° thread angles. Both coarse thread and fine threads can be recut with it.

The single size installation tool for metric helicoil thread inserts designed for manual use. Allows the installation of all types of thread inserts, including those complying with DIN 8140, used in the aeronautics and automotive, and also those with a reduced diameter for general use It is the most popular installation tool, the same contained in the Thread Repair Kits The threaded nose prepares the helicoil thread insert to the size of the thread, making installation simple and safe. It also allows installation in difficult areas, without use of the other hand to hold the insert Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and selftapping bushes, which have always been recognized by the market as products of excellent quality