Results for
Spain
12/25 Pebble (Siliceous River Gravel) Mix (Sand + Gravel) 12/20 Gravel Big Bag
Request for a quoteSpain
Our dry concrete is produced using marble aggregates extracted from our underground quarry, resulting in exclusive properties and a high level of quality to meet the most demanding needs of our clients." - Rapide Plus - Lime Mortar - Natural Hydraulic Lime NHL - 3.5 - Traditional NHL Mortar
Request for a quoteSpain
Pre-dose cement-based mortar with corrosion-passivating additives, fast-hardening and reinforced with synthetic polymers.
Request for a quoteSpain
- Washed Natural Sand 0/4 - Washed Natural Fine Sand 0/2 - Marble Sand - Marble Powder - 6/12 Chickpea Gravel (Crushed Gravel)
Request for a quoteSpain
It is a product based on hydraulic binders and special additives that give it a very fast setting and hardening and a high mechanical resistance. This mortar is ideal for repairs and compromised anchors.
Request for a quoteSpain
It is a conglomerate of marble and cement aggregates, bagged in a dry state so that the user, by mixing it with the indicated water, can obtain a mass concrete, reinforced or pre-contracted, of adequate and constant quality.
Request for a quoteSpain
Hydraulic mortar, single-component, fluid and fast-setting. With high initial and final strengths, excellent adhesion and controlled shrinkage for simple fillings up to 80 mm thick and anchoring of structural elements.
Request for a quoteSpain
Decorative mortar in microcement; single-component powder based on cement, marble and silica aggregates, synthetic resins and special additives that reduce water absorption and permeability and give it optimum workability and docility for its application.
Request for a quoteSpain
Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready to use for interior and exterior use, with inert fillers that give it a textured surface.
Request for a quoteSpain
Industrial mortar composed of cement, lime, marble aggregates and special additives that give it good impermeability and breathability. It can be applied manually or using a spraying machine
Request for a quoteSpain
Industrial mortar composed of cement, lime, marble aggregates and special additives that give it good impermeability and breathability. It can be applied manually or using a spraying machine.
Request for a quoteSpain
Industrial mortar composed of cement, marble aggregates and special additives that reduce water absorption and permeability and give it optimum fluidity for manual and mechanical application, for daily use.
Request for a quoteSpain
Industrial mortar composed of cement, marble aggregates and special additives which give it optimum fluidity for manual and mechanical application, for daily use.
Request for a quoteSpain
Latex formulated with polymers in aqueous dispersion which, pure in some cases, serves as an adhesion bridge, and in other cases, mixed with hydraulic mortars, improves their flexibility, their impermeability, their adhesion and their resistance to compression and traction.
Request for a quoteSpain
Our dry concrete is produced using marble aggregates extracted from our underground quarry, resulting in exclusive properties and a high level of quality to meet the most demanding needs of our clients. - Beton sec H-25 - Béton sec léger - Béton sec autoplaçant H-25 / AR12 - Béton FAST & EASY
Request for a quoteSpain
Pre-dose active mortar for the protection of ferrous reinforcements; stabilizes the rust present, thus protecting the surface from future corrosion. It hardens quickly and restores a high pH around it to protect the concrete.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Spain
Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready for interior and exterior use, with inert fillers that give it a textured surface.
Request for a quoteSpain
Single-component, thixotropic, fast-setting mortar, reinforced with polymer fibres. It has compensated shrinkage and has high mechanical strength and adhesion. It incorporates corrosion inhibitors.
Request for a quoteSpain
SUPERFLEXIBLE mortar for WATERPROOFING all types of construction surfaces, whether or not they are subject to deformation.
Request for a quoteSpain
Flexible single-component mortar that protects and waterproofs all types of construction surfaces, concrete or mortar in the presence of water or humidity. Its flexibility allows it to cover microcracks that form in concrete subjected to deformation. Strong adhesion, impermeability, no shrinkage and excellent workability.
Request for a quoteSpain
Two-component elastic mortar that protects and waterproofs all types of construction surfaces, concrete or mortar in the presence of water or humidity with a ceramic finish. Its flexibility allows it to cover micro-cracks that form in concrete subjected to deformation. Very high flexibility, high adhesion, waterproof, no shrinkage and excellent workability.
Request for a quoteSpain
Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready for indoor and outdoor use, with inert fillers that give it a textured surface. USES FIXMAR PRIMER GR is an adhesion promoter suitable for improving the adhesion of any type of plaster or coating on concrete, brick, lightweight block or plaster supports, as well as on non-absorbent supports such as ceramic floor coverings. On walls and floors. Suitable for application on non-absorbent supports such as ceramic floor coverings with subsequent installation of ceramic or natural stone coverings. On porous cement, anhydrite or sand screeds, FIXMAR PRIMER GR primer acts as a fixer of dust residues, facilitating the correct adhesion of a self-leveling mortar. Acts as a pore cover.
Request for a quoteSpain
Self-levelling mortar based on cement, reinforced with fibres, modified by additives that give it the ability to be fluid and pumpable, especially intended for screeds and levelling of coverings with a thickness between 5 mm and 50 mm, which, once hardened, must be covered with coverings. USES Applicable on concrete or cement mortar supports. On supports with low porosity, apply a Fixmar Primer GR bonding primer beforehand. Regularisation of continuous screeds. Ideal in situations where a flat surface is required as a support for the subsequent application of another type of covering, such as parquet, carpet, ceramic, linoleum, ceramic materials, marble... Suitable for underfloor heating and as a finishing product for synthetic coverings.
Request for a quoteSpain
Self-levelling cement mortar modified with additives that give it the ability to be fluid and pumpable, especially for screeds and levelling of coatings with a thickness between 5 mm and 20 mm that, once hardened, must be covered with coatings. USES Applicable on concrete or cement mortar substrates, on low porosity substrates, apply previously a Fixmar Primer GR bonding primer. Regularisation of continuous screeds. Ideal in situations where a flat surface is required as a support for the subsequent application of another type of coating, such as parquet, carpet, ceramic tiles, linoleum, ceramic materials, marble... Suitable for underfloor heating and as a finishing material for synthetic coatings. Not suitable for wear surfaces.
Request for a quoteSpain
Cement-based self-levelling mortar for low thicknesses 5-20 mm, type CT-C30-F7-A22, made with marble aggregates and special additives that give it optimum fluidity, to be used for the regularisation, repair and levelling of paving slabs. It is a product with high mechanical resistance and a good surface finish, ideal for the creation of continuous screeds. This mortar can be applied on a wide range of supports such as concrete, cement screeds, anhydrite, ceramic or natural stone, both indoors and outdoors.
Request for a quoteSpain
Colored adhesive joint for sealing joints from 0 to 15 mm, with high resistance to abrasion and reduced water absorption. USES Seal joints between floor and wall tiles, both indoors and outdoors. Suitable for all types of ceramics and stones. Suitable for filling swimming pool joints.
Request for a quoteSpain
Low-slip cementitious adhesive type C1T according to UNE-EN 12004:2017, designed with marble aggregates, cement and special additives that give it ideal adhesion, slip and water retention properties for laying ceramic tiles. USES For fixing tiles, medium/high porosity stoneware, in interior cladding, on traditional plaster supports. Prefabricated plasterboards and panels. Suitable for anhydrite substrates.
Request for a quoteSpain
The tile adhesive is a high-performance, single-component adhesive cement, designed, developed, and manufactured with selected marble aggregates, cement, synthetic resins, and other specific additives that provide it with excellent adhesion properties, as well as great flexibility and negligible slip. It is particularly suitable for use in thin layers, with low-absorption and large-format ceramic materials, for facades, high-traffic floors, and floors with underfloor heating. - Professional Adhesive C1T - 25kg Bag. (56 per pallet) - Porcelain Adhesive C2TE - 25kg Bag. (56 per pallet) - Flexible Adhesive C2TE S1 - 25kg Bag. (56 per pallet) - Flexible Gel - 25kg Bag. (56 per pallet) - SuperFlex Flexible Adhesive C2TE S2 - 25kg Bag. (56 per pallet)
Request for a quoteResults for
Cement additives - Import exportNumber of results
41 ProductsCountries
Company type