Cement and additives - Import export

COMPOSITION AND APPEARANCE Plaster-based powder filler, special cements, calcium carbonate, resin, cellulose fibre and various admixtures. The compound obtained is white in colour. TECHNICAL CHARACTERISTICS • Setting time : 30 to 40 minutes • Hardening time : 1 to 2 hours. • Second coating : after 3 hours • Adherence : complies with NFT 30 608 SUITABLE SURFACES All types of interior surfaces complies with DTU 59.1 : plaster, plasterboard, plaster blocks, concrete, cement coating, breeze blocks, cellular concrete, bricks, ceramic, old paintwork, old painted fibreglass, floor tiles, wall tiles, etc. COVERINGS After the filler has completely dried, it can be covered using all types of paints, plaster-based coatings, paste coatings, wallpaper paste. PREPARATION OF SURFACES Surfaces must comply with standard DTU 59.1 and be clean, dry and free from dust and any trace of separating agent. Correctly open up, bevel and dust off the cracks.

Special grouting cements are used to strengthen oil and gas wells – cementing casing pipes (columns).

Standard or specialized cement, cement additives, rheology control agents.....Our turnkey plants in this field testify to the technological knowhow we make available to cement manufacturers.

12/25 Pebble (Siliceous River Gravel) Mix (Sand + Gravel) 12/20 Gravel Big Bag

Our dry concrete is produced using marble aggregates extracted from our underground quarry, resulting in exclusive properties and a high level of quality to meet the most demanding needs of our clients." - Rapide Plus - Lime Mortar - Natural Hydraulic Lime NHL - 3.5 - Traditional NHL Mortar

- Washed Natural Sand 0/4 - Washed Natural Fine Sand 0/2 - Marble Sand - Marble Powder - 6/12 Chickpea Gravel (Crushed Gravel)

Self-levelling mortar based on cement, reinforced with fibres, modified by additives that give it the ability to be fluid and pumpable, especially intended for screeds and levelling of coverings with a thickness between 5 mm and 50 mm, which, once hardened, must be covered with coverings. USES Applicable on concrete or cement mortar supports. On supports with low porosity, apply a Fixmar Primer GR bonding primer beforehand. Regularisation of continuous screeds. Ideal in situations where a flat surface is required as a support for the subsequent application of another type of covering, such as parquet, carpet, ceramic, linoleum, ceramic materials, marble... Suitable for underfloor heating and as a finishing product for synthetic coverings.

Dry concrete with a fine finish supplied in an ecological bag that dissolves in the presence of water, leaving the physical and chemical properties of the concrete intact. This system offers cleaner working conditions because it does not generate dust, safer because it avoids possible injuries when opening the bags and inhalation of dust, more sustainable because it does not generate waste and faster.

Pre-dose cement-based mortar with corrosion-passivating additives, fast-hardening and reinforced with synthetic polymers.

It is a conglomerate of marble and cement aggregates, bagged in a dry state so that the user, by mixing it with the indicated water, can obtain a mass concrete, reinforced or pre-contracted, of adequate and constant quality.

Hydraulic mortar, single-component, fluid and fast-setting. With high initial and final strengths, excellent adhesion and controlled shrinkage for simple fillings up to 80 mm thick and anchoring of structural elements.

Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready to use for interior and exterior use, with inert fillers that give it a textured surface.

Industrial mortar composed of cement, lime, marble aggregates and special additives that give it good impermeability and breathability. It can be applied manually or using a spraying machine

Industrial mortar composed of cement, lime, marble aggregates and special additives that give it good impermeability and breathability. It can be applied manually or using a spraying machine.

Industrial mortar composed of cement, marble aggregates and special additives that reduce water absorption and permeability and give it optimum fluidity for manual and mechanical application, for daily use.

Industrial mortar composed of cement, marble aggregates and special additives which give it optimum fluidity for manual and mechanical application, for daily use.

Latex formulated with polymers in aqueous dispersion which, pure in some cases, serves as an adhesion bridge, and in other cases, mixed with hydraulic mortars, improves their flexibility, their impermeability, their adhesion and their resistance to compression and traction.

Pre-dose active mortar for the protection of ferrous reinforcements; stabilizes the rust present, thus protecting the surface from future corrosion. It hardens quickly and restores a high pH around it to protect the concrete.

It is a product based on hydraulic binders and special additives that give it a very fast setting and hardening and a high mechanical resistance. This mortar is ideal for repairs and compromised anchors.

Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready for interior and exterior use, with inert fillers that give it a textured surface.

Single-component, thixotropic, fast-setting mortar, reinforced with polymer fibres. It has compensated shrinkage and has high mechanical strength and adhesion. It incorporates corrosion inhibitors.

SUPERFLEXIBLE mortar for WATERPROOFING all types of construction surfaces, whether or not they are subject to deformation.

Flexible single-component mortar that protects and waterproofs all types of construction surfaces, concrete or mortar in the presence of water or humidity. Its flexibility allows it to cover microcracks that form in concrete subjected to deformation. Strong adhesion, impermeability, no shrinkage and excellent workability.

Two-component elastic mortar that protects and waterproofs all types of construction surfaces, concrete or mortar in the presence of water or humidity with a ceramic finish. Its flexibility allows it to cover micro-cracks that form in concrete subjected to deformation. Very high flexibility, high adhesion, waterproof, no shrinkage and excellent workability.

Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready for indoor and outdoor use, with inert fillers that give it a textured surface. USES FIXMAR PRIMER GR is an adhesion promoter suitable for improving the adhesion of any type of plaster or coating on concrete, brick, lightweight block or plaster supports, as well as on non-absorbent supports such as ceramic floor coverings. On walls and floors. Suitable for application on non-absorbent supports such as ceramic floor coverings with subsequent installation of ceramic or natural stone coverings. On porous cement, anhydrite or sand screeds, FIXMAR PRIMER GR primer acts as a fixer of dust residues, facilitating the correct adhesion of a self-leveling mortar. Acts as a pore cover.

Smoothing compound provides a fine finish with strong adhesion.

Self-levelling cement mortar modified with additives that give it the ability to be fluid and pumpable, especially for screeds and levelling of coatings with a thickness between 5 mm and 20 mm that, once hardened, must be covered with coatings. USES Applicable on concrete or cement mortar substrates, on low porosity substrates, apply previously a Fixmar Primer GR bonding primer. Regularisation of continuous screeds. Ideal in situations where a flat surface is required as a support for the subsequent application of another type of coating, such as parquet, carpet, ceramic tiles, linoleum, ceramic materials, marble... Suitable for underfloor heating and as a finishing material for synthetic coatings. Not suitable for wear surfaces.

Cement-based self-levelling mortar for low thicknesses 5-20 mm, type CT-C30-F7-A22, made with marble aggregates and special additives that give it optimum fluidity, to be used for the regularisation, repair and levelling of paving slabs. It is a product with high mechanical resistance and a good surface finish, ideal for the creation of continuous screeds. This mortar can be applied on a wide range of supports such as concrete, cement screeds, anhydrite, ceramic or natural stone, both indoors and outdoors.

Single-component powder mortar based on cement, marble and silica aggregates, synthetic resins and special additives that reduce water absorption and permeability and give it optimum workability and docility for its application, as well as being characterized by very high abrasion, high compressive strength, as well as an ideal fineness for a smooth finish.