Water on - Import export

Microwave Resonator, Continuous In Line Moisture measurement Description The microwave resonance measurement uses the electromagnetic energy stored inside a resonator to determine the water content of a product. Via a non conducting window, the resonator field is coupled into the material located in front of the resonator. This so called leakage field is not radiated. Depending on the dielectric properties of the product, the shift of resonance frequency and bandwidth of the resonator is used for measurement. The ratio of bandwidth and frequency shift is density independent. The measurement is highly suitable for bulk material.

Microwave spectrometer, Continuous In Line measurement of density and dry matter Description The microwave measurement generate an electromagnetic wave of low energy. This signal is coupled via an antenna into the product (Paper, Tobacco, Sand, etc.). Depending on the dielectric properties of the product the signal propagates in the product. After the signal has passed the product a second antenna receives the signal (Transmission). Amplitude and phase shift of the received signal are an expression for the water content or dry matter of the product. The microwave measurement is very stable and it has a quick response to product changes.

NIR LED– Technology, Continuous InLine density measurement Description The HK8 Series are NIR (Near Infrared) LED InLine measurement devices with state–of–the–art technology. The devices are used on conveyor belt, in pipelines (connection via flowthrough measuring cell or flange) and in tanks / vessel. Through the modular construction (Sensor and evaluation unit are separate), the sensor can be installed at a difficult accessible places and the evaluation unit can be installed at a well accessible place. This ensure the easy handling. The modular construction makes the operation of the HK8– Series very easy.

Microwave measurement device, Continuous In Line measurement of dry matter The measurement is contactless, the measured values of the %, %H2O,%TS, Bx, g/cm3, g/l or mg/l content are available as digital and analogue values. The HK2 is applicable in different industries like sugar, sewage plant and building material industry. Because of further increasing quality requirements after ISO and EU standards, the industries have an enhanced demand for improved quality control, standardization and InLinetrend observation.

Microwave measurement device, Continuous InLine measurement of dry matter or consistency Description At the microwave measurement technology an electromagnetic wave with very low energy is generated. This signal is coupled via an antenna into the product (Cellulose, Cheese, Milk, Curd, etc.). Depending on the dielectric properties of the product the signal propagates in the product. After the signal has passed the product a second antenna receives the signal (Transmission). Amplitude and phase shift of the received signal are an expression for the consistency, water content or dry matter of the product. The microwave measurement is very stable and it has a quick response to product changes.

We offer hydro anthracite h In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

Our flow meters offers a wide range of rear and side connection options. Only special measuring tubes that have been manufactured and calibrated according to customer specification are used. Due to its design, the 4A flow meter for example is ideally suitable for panel mounting and wall mounting. A glass can easily be replaced while still installed.

Due to its design, the 4L flow meter is especially well suited for installation in panels and wall mounting. With the available standard measuring tubes it can be used for many measuring ranges. Protective tubes made of PMMA are also used to provide additional safety against glass breakage for the user.

Tapping of water is also possible during frost periods because the hydrant is completely emptied when in „closed“ Position. Simple emptying per Drainage. Wear-free operation due to the use of ceramic disks. Water jet and flow rate are alterable by use of different tap aerators. Non-return valve in the water inlet. Free choice of location (a wall etc. is not necessary). Hydrants are also available with lockable handle. height: 1400mm outlet: 150mm Art.-No.: 376797 height: 1400mm outlet: 250mm Art.-No.: 376803 height: 1400mm outlet: 300mm Art.-No.: 376810 height: 1600mm outlet: 150mm Art.-No.: 376827 height: 1600mm outlet: 250mm Artikelnummer: 376834 height: 1600mm outlet: 300mm Artikelnummer: 376841 height: 2000mm outlet: 250mm Artikelnummer: 376858 height: 2000mm outlet: 300mm Artikelnummer: 376865

The function of the flow sensor is based on the calorimetric principle. The probe is heated up from the inside a few degrees Celsius in relation to the flow medium, in which it protrudes. When the medium flows, the heat generated in the probe is dissipated through the medium. The temperature within the sensor is measured and compared with the likewise measured medium temperature. From the obtained temperature difference the flow state of each medium can be derived. These sensors are applied in areas such as monitoring of cooling systems, ventilation systems, pump dry running by checking the presence of liquid or gas flows.

Our product range includes spiral hoses, PA / PUR / PE hoses, PVC hoses with and without fibre, soft PVC hoses, fibre reinforced PUR hoses and PTFE hoses. Furthermore we offer anti-static hoses, spark erosion protected PU hoses, compressed air hoses, autogenous hoses, suction and pressure hoses and hoses especially for use with water. The assortment is rounded out by hose rupture valves, hose winders and cable winders, hose terminal blocks, hose cutters and hose holders. For every intended use we have the right material and the matching hose size.

Our assortment contains a range of pressure controllers for regulating the water pressure required for your application. In addition you will find filters for water treatments here. Water treatment is generally considered the targeted change of water quality. Here it is differentiated as to whether substances are removed from the water or added to the water. Water treatment represents an important process step in the production of drinking water for human use. Furthermore we have proportional control valves especially for use with water. There are various accessories and spare parts available for the mentioned products.

These are the accessories used in industrial filter.

With the EASYPRO, you get a customised system for monitoring and controlling the water parameters in your swimming pool. The TOPAX® MC multi-channel controller continuously measures the water parameters and keeps them within the target range. It controls numerous actuators and control elements and is simple and intuitive to operate. Multi-coloured LEDs provide a visual warning if the water parameters are outside the target range. . Multi-channel controller TOPAX® MC . Measuring cells and measuring cell fittings . Sample water filter . Flow monitor . Flow controller DFR 45 with sample water tapping point and built-in temperature sensor . Inlet and outlet tap . Holder for buffer solutions and buffer solutions for adjusting the measuring cells . Multicoloured LEDs . Cover bonnet Some of the measuring cells are packaged separately and are not pre-assembled.

Control gas streams and oxygen in the aquarium For fish tanks and aquariums, manufacturers trust POREX ® aquarium bubbler components. Designed to efficiently introduce bubbles into water to optimize oxygen transfer into the aquarium tank. Available in tubes and custom-molded shapes, our aquarium bubbler solutions: Consistently introduce gas streams–Bubblers ensure efficient and consistent introduction and diffusion of gas streams into the water. Optimize oxygen transfer – Even pore size distribution creates more uniform, small bubbles. request sample ask an engineer

Filter industrial wastewater with tubular membrane filters For micro and ultrafiltration of industrial wastewater, our POREX® tubular membrane filters (TMF) are designed to fit new and existing tubular membrane systems. During operation, a fluid - such as chemically pre-treated wastewater - flows through the cross-flow membrane tubes at high velocity, sufficient to maintain turbulent flow. Best used for industries including electroplating, microchip manufacturing and zero liquid discharge systems, our tubular membrane filters: Fit new and current tubular membrane installations Are highly durable - Strong membrane-to-tube bond ensures long service life, and tough membrane withstands sharp particles and strong cleaning regimens. Enhance wastewater system performance with backwashable capability Multiple configuration options to meet low to high flow requirements

Maximize filtration efficiency and lifespan of filtration cartridges Media support disks improve the filtration and structural integrity of water filtration cartridges. Specifically designed for drinking water applications, our media support disks: Extend media lifespan–Removal of carbon fines, dirt, rust and sediment extends media lifespan. Maximize filtration efficiency–Structural integrity of porous tubes maximizes efficiency while removing sediment. Enhance filtration – Ability to tightly pack media into tubes prevents poor filtration due to channeling.

Reliable performance in the most challenging environments Engineered for absolute fiber purity and consistency, POREX® melt blown filter cartridges provide optimized dirt-holding capacity, low-pressure drop, high filtration efficiency, and long lifespans. Entirely made of melt blown nylon microfibers, our melt blown filter cartridges are binder-free and thermally treated for reliable performance in the most challenging environments. Specifically designed for drinking water applications, our melt blown filter cartridges: Increase efficiency–Cartridges are engineered for optimal dirt-holding capacity and high filtration efficiency. Provide chemical and thermal resistance–Nylon structure provides exceptional chemical and thermal resistance. request sample ask an engineer

Maximize filtration efficiency and structural integrity POREX® media support tubes, sleeves, outer wraps and cores improve the filtration and structural integrity of water filtration cartridges. Specifically designed for drinking water applications, our media support tubes: Extend primary filter lifespan–Removal of carbon fines, dirt, rust and sediment extends the primary filter lifespan, including carbon blocks and RO filtration. Maximize flow and filtration efficiency–Structural integrity of porous tubes maximizes efficiency while removing sediment. Enhance filtration – Ability to tightly pack media into tubes prevents poor filtration due to channeling.

Enhance pre-filtration with longer life and durability POREX® carbon block pre-filters – also called seamless filters - offer advanced pre-filtration. Thick polyolefin walls allow for maximum flow and high efficiency, quickly removing sediment particulates from water. The seamless, unified design enables easy assembly while eliminating the risk of downstream contamination due to seam failure. With fully customizable dimensions, fiber sizes, pore sizes and densities, our carbon block pre-filters: Eliminate the need for a separate sediment filter - combines sediment and carbon block filtration in one step. Extend the life of carbon filters–Material quickly removes sediment particulates to extend product life. Eliminate challenges from seam failures–Durable one-piece construction of the material eliminates issues caused by seam failures.

calibratable, electromechanical single-chamber weighing scale for up to four different admixtures with automatic water flushing mounted in splash-water and dust protected casing

Hydraulic Submersible Water Pumps with grill Hydraulic Submersible Water Pumps with Open Suction Hydraulic Mounted Submersible Water Pumps Brochure Submersible Water Pumps 7 MOTIVES TO CHOOSE HYDRAULIC PUMPS FOR THE POWER PERFORMANCES The hydraulic pumps have an unbeatable power / weight/ dimension ratio, example an hydraulic motor with power of 15 k W have a weight of only 4 k g and the dimension of a beer cr ate , which other type of motor either electric, gasoline, pneumatic or other can give such concentrated power. This gives to the hydraulic pumps compactness, lightness, easy handling and unmatched performances. In case of emergencies and calamities (like floods) where are necessary efficiency, high power, speed, capacity of operate in all situations then no other pumping system is better then hydraulic pumps, guarantee !!! FOR THE SAFETY Absence of electricity is an implicit assurance of safety as it is impossible to cause electric shocks, a man can work in all...

High capacity biocarriers both for biological sewage and gas treatment and for aquaculture Total Surface: > 5.000 m²/m³

LIPP drinking water tanks for water supply companies are offered together with our project partner Kurz Leitungsbau GmbH. In doing so, we meet the highest standards applicable to the supply of drinking water, from planning and conception up to construction. Our automated welding process for high alloy stainless steels based on the LIPP System enables us to offer tanks with a maximum volume of 10,000 m3. In addition, on site production “off the production line” enables construction to be completed within the shortest possible time. Optimum quality thanks to automated welding process Material savings and additional stability thanks to circumferential profile Short construction times thanks to mechanised production Easy to maintain and clean Low investment and maintenance costs Can be set up indoors or in the open air Turnkey complete solution or components