Water on - Import export

Tapping of water is also possible during frost periods because the hydrant is completely emptied when in „closed“ Position. Simple emptying per Drainage. Wear-free operation due to the use of ceramic disks. Water jet and flow rate are alterable by use of different tap aerators. Non-return valve in the water inlet. Free choice of location (a wall etc. is not necessary). Hydrants are also available with lockable handle. height: 1400mm outlet: 150mm Art.-No.: 376797 height: 1400mm outlet: 250mm Art.-No.: 376803 height: 1400mm outlet: 300mm Art.-No.: 376810 height: 1600mm outlet: 150mm Art.-No.: 376827 height: 1600mm outlet: 250mm Artikelnummer: 376834 height: 1600mm outlet: 300mm Artikelnummer: 376841 height: 2000mm outlet: 250mm Artikelnummer: 376858 height: 2000mm outlet: 300mm Artikelnummer: 376865

The function of the flow sensor is based on the calorimetric principle. The probe is heated up from the inside a few degrees Celsius in relation to the flow medium, in which it protrudes. When the medium flows, the heat generated in the probe is dissipated through the medium. The temperature within the sensor is measured and compared with the likewise measured medium temperature. From the obtained temperature difference the flow state of each medium can be derived. These sensors are applied in areas such as monitoring of cooling systems, ventilation systems, pump dry running by checking the presence of liquid or gas flows.

These are the accessories used in industrial filter.

The energy costs of a compressed-air system are decisively influenced by the pressure drop occurring during compressed-air filtration. To maintain the required operating pressure, this pressure drop needs to be compensated by correspondingly higher compressor performance. The consequence: increased energy demand, premature wear of the compressor ... and therefore higher costs. The better solution: CLEARPOINT compressed-air filters by BEKO TECHNOLOGIES.

BEKOSPLIT splitting plants clean emulsified condensates which occur as a result of unfavourable initial conditions or of certain lubricant/compressor combinations. In addition to compressed-air condensate, other oil-containing industrial wastewaters can also be processed. Water-insoluble organic substances and a large variety of solid contaminations are removed from the water. Any heavy metals, dirt and paint particles contained in the water are reliably adsorbed

3-way construction With 12-fold splitter

The requirements for reliable filter technology are extremely diverse. KOPP is responding to this with a comprehensive range of reliable filter devices. Special designs are also possible. Filter devices Wide range of products for every need Drinking water is supplied by the waterworks clean and without contamination. However, on its way through the extensive network of pipes, water can pick up dirt particles, which cause unpleasant malfunctions and operational interruptions and thus cause costly failures, for example in machines, pumps, valves or household appliances. By installing a filter, you ensure that disruptive particles are retained. This way you avoid operational disruptions and expensive repairs. The requirements for reliable filter technology are extremely diverse. KOPP is responding to this with a comprehensive range of reliable filter devices. Special designs are also possible. Individual solutions for every need – that’s KOPP. Also in the area of ​​filter technology.

The energy market called for technical solutions contributing to a mains stabilization and benefiting from the potential of favourable energy prices at the same time. The warm water boilers can be delivered in a power range from 35 kW up to 1.2 MW whereas the hot water boilers are available with a capacity of max. 10 MW. By means of parallel or series connection of several systems the power range can be extended optionally. The functional principle of warm and hot water boilers relies on the direct heating of flowing water via numerous resistance heating elements. For control purposes, they are summarized in groups which are either switched in steps or triggered infinitely variable via a thyristor power controller.

High-pressure cleaning and surface preparation with water requires precise management of the water jet. This precise management is necessary to ensure that the required result (e.g. surface finish) is achieved within a reasonable time. The method must be safe and fatigue free. With this in mind, we offer a specially designed and manufactured range of high pressure guns with electrical or mechanical control. The exceptional ergonomics of these tools have been achieved through innovative detail solutions: For example, our high-pressure guns are equipped with a special swivel handle that transmits any torque to the wrist. In addition, the hose connection can be swivelled in all directions, allowing optimum hose routing for all working situations. Our range of high pressure guns is complemented by various versions of foot valves, rotating gun lances, rotating nozzles and other accessories for a wide variety of applications, such as pipe cleaning.

Optimum surface cleaning with KAMAT high-pressure rotating nozzles In order to ensure a surface treatment with excellent results and within a reasonable time, we have developed special externally driven rotating nozzles suitable for our high pressure pumps: Depending on the customer's requirements, our nozzles can be driven pneumatically, electrically or hydraulically. With traditional, self-powered rotating nozzles, the water jet hits an angle before it exits the nozzle, causing the nozzle to rotate. Driving the rotating nozzle causes the water jet to lose energy and is therefore much less efficient. Our externally driven rotary nozzles concentrate the hydraulic energy entirely on the machining process. KAMAT rotating nozzles provide coherent jets that can be moved precisely and quickly over large areas. In the case of externally driven rotation, the hydraulic energy is used entirely on the surface being sprayed, giving excellent and efficient results on surfaces.

Lime and corrosion are hidden cost factors. Inevitably, these two “enemies of temperature control channels” prolong the cooling time, reduce the process safety and have a negative influence on the parts’ quality. The problem occurs insidiously in each plastic processing company, because lime and corrosion gradually build an insulation layer in the cooling channels and are thus responsible for a deteriorating heat transfer. Often the problem is not recognized until the demanded parts’ quality cannot be achieved any longer or if the complete system breaks down. The effect of cleaning the cooling channels of an injection mould is a reduction of cooling time up to 40 % (in individual cases even more), depending on the amount of deposits. The latest development, easy to use by the processor himself, is moldclean, a compact appliance which cleans polluted cooling channels in injection moulds and heat exchanger systems.

Digital pH sensor SMARTPAT analytical sensors from KROHNE are the first and only sensor line in the market with integrated transmitter technology. The complete circuitry is miniaturised and fits into the sensor head. This technical achievement cuts the price in half compared to all measurement systems without integrated transmitter technology. KROHNE is the only company who offers a real open standard without additional external transmitter and with a direct connection via standardised fieldbus from the sensor to the process control system. The SMARTPAT sensor stores all data and sends these as bidirectional digital signals with 4...20 mA / HART® 7 protocol to the control and asset management systems, handhelds, PC and other peripherals.

Solution for partially filled pipes The TIDALFLUX 2000 flow sensor with integrated and non-contact capacitive level measuring system provides accurate flow measurement in partially filled pipes. TIDALFLUX is designed to measure reliably between 10% and 100% of the pipe cross section. The integrated level sensors in the liner are in no contact with the liquid and are therefore insensitive against fat and oil floating on the surface.

Battery powered electromagnetic flowmeter for drinking water applications WATERFLUX 3070 is the first battery powered water meter for the drinking water industry that is capable of measuring flow, pressure and temperature with one sensor. To enable remote access to flow, pressure and temperature data the WATERFLUX 3070 has a RS485 Modbus RTU communication option. For this it has a special Modbus version designed for battery operation. With its real-time-data on flow, pressure and temperature the WATERFLUX 3070 provides important data to support customers business processes like zoning for water balance (DMA), water abstraction, pressure management, and revenue collection.

PROCESS DATA MEASUREMENT AND PROCESS CONTROL ON HIGHEST LEVEL AND MAINTENANCE-FREEFollowing the user‘s request for easy maintenance and low susceptibility to slightly soiled water, the proflow ultrasonic - as a replacement for the current and widely used standard measuring variant with impeller, turbine or vortex - now makes contactless measurement according to the ultrasonic principle (without rotating parts) available. The sensors can be visualized via a protemp controller or connected to a PLC. Alternatively, the mechanical flow measurement according to the differential pressure principle is available with the proflow mechanical. Easy to integrate in machines and plant lines 4 or 6 x consumer channels (forward/return) 1/2“ With LED-display on fl ow sensor Temperature measurement PT 1.000 Big RED/GREEN Status LED 1 x main connection 1“ Flow rate each channel 1 ... 30 l/min (no „overload-risk“-> 60 l/min possible]) Operating temperature: 0 ...120 °C

Type: 4618-V Manufacturer: ELWA Description: Water heater

Type: 4618 Manufacturer: ELWA Description: Water heater

Water-based one-component fire protection impregnation for wood and wood products and building elements with antibacterial and fungicidal properties for interior and exterior use — antibacterial, with fungicidal effect — inorganic — non-combustible — non-toxic — temperature resistant (after drying out) — environmentally safe — high adhesive properties

Low-viscosity, water based, one-component non-combustible adhesive with endothermic effect, made of natural components, mainly rock formations and basalt microfiber. Cerammatrix 01-50 is used to bond products made of mineral fibers (basalt, carbon, glass) as well as mineral wool and/or metals. — 100% natural origin — inorganic and antibacterial — non-combustible — no smoke or fuses in case of fire — high temperature resistant (after drying) — safe for people and environment — high adhesive properties — moisture-resistant — water resistant after special treatment of the finished product

EFFICIENT CLEANING – INTUITIVE, ROBUST AND SEMI-AUTOMATIC IF REQUIREDWith a basket centrifuge from the ZM range, you get a robust and easy-to-operate unit for cleaning up to 1,000 litres of process water per hour. Separate up to 14 litres of sludge in a single cycle! The sludge basket is removed and emptied manually. A PLC is available for semi-automatic operation. CENTRIFUGES IN TWO CONFIGURATIONS The ZM basket centrifuge is available in two configurations to meet your requirements. The ZM 03-ECO 1 is perfectly suited for use on a single mass finishing machine in standard applications and island solutions. For two to three mass finishing machines, the ZM 03-FL is the ideal choice. You can of course retrofit application-specific options like a pump station and recooling unit. THE BENEFITS AT A GLANCE Centrifuges with up to 2,012 times the acceleration of gravity Up to 14 l (19 kg) of sludge per cycle Up to 1,000 l of process water per hour PLC for semi-automatic operation

FULLY AUTOMATIC CENTRIFUGATION FOR CLEANING YOUR PROCESS WATERThe PLC-controlled peeling centrifuges of the ZA range are your reliable aid for fully automatic process water cleaning. The sludge is separated in a rotating drum and automatically peeled off into a sludge tank. You can set the cleaning cycles individually. MODULAR DESIGN FOR INDIVIDUAL SOLUTIONS The ZA range features a modular design, allowing you to flexibly adjust it to your needs. Select the dirt and process water tank, available in a range of sizes, as well as the additional process water pumps, dosing units or a heat exchanger, suitable for both the ZA 04 and ZA 06 configurations. THE BENEFITS AT A GLANCE Centrifuges with up to 2,417 times the acceleration of gravity PLC for fully automatic operation Two configurations: ZA 04 with a cleaning power of 1,000 l of process water per hour ZA 06 with a cleaning power of 2,000 l of process water per hour

A clear matter: disposing of process water in an operationally safe manner After vibratory finishing, the process water contains solids and pollutants such as metals, oils and greases. To prevent these from entering the sewage system during disposal, you can clean your process water - even acidic or alkaline water - in our flocculation plants. You can then discharge the clear water into the sewage system in accordance with legal regulations. DO/GA flocculation units The PLC-controlled DO and GA flocculation plants are fully automatic solutions that purify up to 2,000 litres of process water per hour. If your daily water volume to be treated exceeds 3,000 litres, these plants are the right choice for purifying your process water. RT flocculation unit The easy-to-operate and inexpensive RT unit is suitable for you if you want to purify a daily water volume of up to 3,000 litres.

Wash basin mounting for dry-wall construction, for loads of up to 150 kg, with markings for 180 mm and 280 mm axial distance

The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications!

The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications! The practical SANHA-Box range comes in many versions: Preconfigured boxes are available for wash basins and sinks, through baths and showers, and onto water meter connections. All SANHA-Boxes are also available with already isolated multilayer plastic pipes. A complete overview of our product portfolio and the complete range of accessories can be found in our brochure – or simply call us at +44 1628 819245!

Practical, time-saving foam installation box with preconfigured multilayer pipe and fittings / connections for radiators. For masonry walls. Distance between flow and return flow 50 mm, with thermal and sound insulation as well as condensate protection. 2 MultiFit-Flex multilayer pipe connections dimension 16 mm. Box dimension: 120 x 95 x 50 mm (length x width w/o plate/width with plate x depth)

SANHA prefab installation box for cold water meter installation in masonry construction, with thermal and sound insulation, condensate protection. Foam body with multilayer pipes and fitting connections inside. 1 water meter base unit and 1 straight cutoff valve, 2 female threaded ends Rp 3/4, 240 x 350 x 70 mm

The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications! The practical SANHA-Box range comes in many versions: Preconfigured boxes are available for wash basins and sinks, through baths and showers, and onto water meter connections. All SANHA-Boxes are also available with already isolated multilayer plastic pipes. A complete overview of our product portfolio and the complete range of accessories can be found in our brochure – or simply call us at +44 1628 819245!

The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications!