Water on - Import export

Our flow meters offers a wide range of rear and side connection options. Only special measuring tubes that have been manufactured and calibrated according to customer specification are used. Due to its design, the 4A flow meter for example is ideally suitable for panel mounting and wall mounting. A glass can easily be replaced while still installed.

Due to its design, the 4L flow meter is especially well suited for installation in panels and wall mounting. With the available standard measuring tubes it can be used for many measuring ranges. Protective tubes made of PMMA are also used to provide additional safety against glass breakage for the user.

Tapping of water is also possible during frost periods because the hydrant is completely emptied when in „closed“ Position. Simple emptying per Drainage. Wear-free operation due to the use of ceramic disks. Water jet and flow rate are alterable by use of different tap aerators. Non-return valve in the water inlet. Free choice of location (a wall etc. is not necessary). Hydrants are also available with lockable handle. height: 1400mm outlet: 150mm Art.-No.: 376797 height: 1400mm outlet: 250mm Art.-No.: 376803 height: 1400mm outlet: 300mm Art.-No.: 376810 height: 1600mm outlet: 150mm Art.-No.: 376827 height: 1600mm outlet: 250mm Artikelnummer: 376834 height: 1600mm outlet: 300mm Artikelnummer: 376841 height: 2000mm outlet: 250mm Artikelnummer: 376858 height: 2000mm outlet: 300mm Artikelnummer: 376865

The function of the flow sensor is based on the calorimetric principle. The probe is heated up from the inside a few degrees Celsius in relation to the flow medium, in which it protrudes. When the medium flows, the heat generated in the probe is dissipated through the medium. The temperature within the sensor is measured and compared with the likewise measured medium temperature. From the obtained temperature difference the flow state of each medium can be derived. These sensors are applied in areas such as monitoring of cooling systems, ventilation systems, pump dry running by checking the presence of liquid or gas flows.

These are the accessories used in industrial filter.

With the EASYPRO, you get a customised system for monitoring and controlling the water parameters in your swimming pool. The TOPAX® MC multi-channel controller continuously measures the water parameters and keeps them within the target range. It controls numerous actuators and control elements and is simple and intuitive to operate. Multi-coloured LEDs provide a visual warning if the water parameters are outside the target range. . Multi-channel controller TOPAX® MC . Measuring cells and measuring cell fittings . Sample water filter . Flow monitor . Flow controller DFR 45 with sample water tapping point and built-in temperature sensor . Inlet and outlet tap . Holder for buffer solutions and buffer solutions for adjusting the measuring cells . Multicoloured LEDs . Cover bonnet Some of the measuring cells are packaged separately and are not pre-assembled.

Filter industrial wastewater with tubular membrane filters For micro and ultrafiltration of industrial wastewater, our POREX® tubular membrane filters (TMF) are designed to fit new and existing tubular membrane systems. During operation, a fluid - such as chemically pre-treated wastewater - flows through the cross-flow membrane tubes at high velocity, sufficient to maintain turbulent flow. Best used for industries including electroplating, microchip manufacturing and zero liquid discharge systems, our tubular membrane filters: Fit new and current tubular membrane installations Are highly durable - Strong membrane-to-tube bond ensures long service life, and tough membrane withstands sharp particles and strong cleaning regimens. Enhance wastewater system performance with backwashable capability Multiple configuration options to meet low to high flow requirements

Control gas streams and oxygen in the aquarium For fish tanks and aquariums, manufacturers trust POREX ® aquarium bubbler components. Designed to efficiently introduce bubbles into water to optimize oxygen transfer into the aquarium tank. Available in tubes and custom-molded shapes, our aquarium bubbler solutions: Consistently introduce gas streams–Bubblers ensure efficient and consistent introduction and diffusion of gas streams into the water. Optimize oxygen transfer – Even pore size distribution creates more uniform, small bubbles. request sample ask an engineer

Maximize filtration efficiency and lifespan of filtration cartridges Media support disks improve the filtration and structural integrity of water filtration cartridges. Specifically designed for drinking water applications, our media support disks: Extend media lifespan–Removal of carbon fines, dirt, rust and sediment extends media lifespan. Maximize filtration efficiency–Structural integrity of porous tubes maximizes efficiency while removing sediment. Enhance filtration – Ability to tightly pack media into tubes prevents poor filtration due to channeling.

Reliable performance in the most challenging environments Engineered for absolute fiber purity and consistency, POREX® melt blown filter cartridges provide optimized dirt-holding capacity, low-pressure drop, high filtration efficiency, and long lifespans. Entirely made of melt blown nylon microfibers, our melt blown filter cartridges are binder-free and thermally treated for reliable performance in the most challenging environments. Specifically designed for drinking water applications, our melt blown filter cartridges: Increase efficiency–Cartridges are engineered for optimal dirt-holding capacity and high filtration efficiency. Provide chemical and thermal resistance–Nylon structure provides exceptional chemical and thermal resistance. request sample ask an engineer

Maximize filtration efficiency and structural integrity POREX® media support tubes, sleeves, outer wraps and cores improve the filtration and structural integrity of water filtration cartridges. Specifically designed for drinking water applications, our media support tubes: Extend primary filter lifespan–Removal of carbon fines, dirt, rust and sediment extends the primary filter lifespan, including carbon blocks and RO filtration. Maximize flow and filtration efficiency–Structural integrity of porous tubes maximizes efficiency while removing sediment. Enhance filtration – Ability to tightly pack media into tubes prevents poor filtration due to channeling.

Enhance pre-filtration with longer life and durability POREX® carbon block pre-filters – also called seamless filters - offer advanced pre-filtration. Thick polyolefin walls allow for maximum flow and high efficiency, quickly removing sediment particulates from water. The seamless, unified design enables easy assembly while eliminating the risk of downstream contamination due to seam failure. With fully customizable dimensions, fiber sizes, pore sizes and densities, our carbon block pre-filters: Eliminate the need for a separate sediment filter - combines sediment and carbon block filtration in one step. Extend the life of carbon filters–Material quickly removes sediment particulates to extend product life. Eliminate challenges from seam failures–Durable one-piece construction of the material eliminates issues caused by seam failures.

calibratable, electromechanical single-chamber weighing scale for up to four different admixtures with automatic water flushing mounted in splash-water and dust protected casing

High capacity biocarriers both for biological sewage and gas treatment and for aquaculture Total Surface: > 5.000 m²/m³

LIPP drinking water tanks for water supply companies are offered together with our project partner Kurz Leitungsbau GmbH. In doing so, we meet the highest standards applicable to the supply of drinking water, from planning and conception up to construction. Our automated welding process for high alloy stainless steels based on the LIPP System enables us to offer tanks with a maximum volume of 10,000 m3. In addition, on site production “off the production line” enables construction to be completed within the shortest possible time. Optimum quality thanks to automated welding process Material savings and additional stability thanks to circumferential profile Short construction times thanks to mechanised production Easy to maintain and clean Low investment and maintenance costs Can be set up indoors or in the open air Turnkey complete solution or components

1000 ml

The energy costs of a compressed-air system are decisively influenced by the pressure drop occurring during compressed-air filtration. To maintain the required operating pressure, this pressure drop needs to be compensated by correspondingly higher compressor performance. The consequence: increased energy demand, premature wear of the compressor ... and therefore higher costs. The better solution: CLEARPOINT compressed-air filters by BEKO TECHNOLOGIES.

The neutralisation unit Neutrakon® SN90 is suitable for the neutralisation (increase of the pH value above 6,5) of acidic condensates of industrial condensing units up to 11 MW. Thanks to the single removable Neutra baskets, maintenance work is easy. The innovative matrix improves the flow of the condensate Made in stainless steel type 4VA With ball valve for easy maintenance Suitable for condensates of industrial heating units, CHP and flue gas systems up to 11 MW (1500 l/h)

The neutralisation unit Neutrakon® is suitable for the neutralisation (increase of the pH value above 6,5) of acidic condensates of gas condensing boilers (heat exchangers) and/or flue gas systems up to 1000 kW. With booster technology for an increase lifetime. The Premium Line consists of 6 different units for the neutralisation of acidic condensates of gas condensing heating units up t0 1000 kW Neutrakon® N35 – up to 35 kW Neutrakon® N65 – up to 65 kW Neutrakon® N170B - up to 170 kW Neutrakon® N300B - up to 300 kW Neutrakon® N650B - up to 650 kW Neutrakon® N1000B - up to 1000 kW

The neutralisation unit Neutrakon® is suitable for the neutralisation (increase of the pH value above 6,5) of acidic condensates of gas condensing boilers (heat exchangers) and/or flue gas systems The Neutrakon® Classic Line consists of 4 different units for the neutralisation of acidic condensates of gas condensing heating units from 25 – 300 kW Neutrakon® 01/25 – up to 35 kW Neutrakon® 02/50 – up to 65 kW Neutrakon® 03/150 - up to 150 kW Neutrakon® 04/300 - up to 300 kW

Pressure regulator of the compact series for water Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Pressure range up to 15 bar

3-way construction With 12-fold splitter

1000 ml

We install the necessary hoses between hydraulic power units and press cylinders. We also create piping and circuits for thermal oils and cooling water.

Water Retention Box made of recycled PP material. With high temporary and possibly permanent retention volume in combination with a Flow Control System for specific regulation of water discharge and/or water storage.

Areas of Application and Advantages BEDIA CLS 10 stands for special versions of our well-proven CLS 40 series for heavy duty applications. Currently, the BEDIA CLS 10 series includes a variety of sensors, which are compatible replacement parts for level switches from Cooper Standard and Robert Shaw which are obsolete nowadays – and this in well proven BEDIA quality. This also includes sensors with 2 complementary CMOS outputs. It should be emphasized that the water sensors with two complementary outputs can be operated with a supply voltage of 4.75 V DC – 32 V DC. Operating Principle The function of the sensor is based on the capacitive principle. It detects the change in capacitance that arises when an electrode surrounded by air is immersed into a liquid medium. This change in capacitance at the electrode of the sensor excites an oscillator, causing it to oscillate (at a frequency of approx. 600 kHz). Then this signal is processed by a microprocessor-based evaluation circuit.

Filter + filter water separator Sizes: 1/8" and 1/4" Filter fineness: 5 µm + 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 370 Nl / min Pressure range up to 15 bar

High capacity biocarriers both for biological sewage and gas treatment and for aquaculture Total Surface: 258 m²/m³

High capacity biocarriers both for biological sewage and gas treatment and for aquaculture Total Surface: 262 m²/m³