Water on - Import export

Microwave Resonator, Continuous In Line Moisture measurement Description The microwave resonance measurement uses the electromagnetic energy stored inside a resonator to determine the water content of a product. Via a non conducting window, the resonator field is coupled into the material located in front of the resonator. This so called leakage field is not radiated. Depending on the dielectric properties of the product, the shift of resonance frequency and bandwidth of the resonator is used for measurement. The ratio of bandwidth and frequency shift is density independent. The measurement is highly suitable for bulk material.

Microwave spectrometer, Continuous In Line measurement of density and dry matter Description The microwave measurement generate an electromagnetic wave of low energy. This signal is coupled via an antenna into the product (Paper, Tobacco, Sand, etc.). Depending on the dielectric properties of the product the signal propagates in the product. After the signal has passed the product a second antenna receives the signal (Transmission). Amplitude and phase shift of the received signal are an expression for the water content or dry matter of the product. The microwave measurement is very stable and it has a quick response to product changes.

NIR LED– Technology, Continuous InLine density measurement Description The HK8 Series are NIR (Near Infrared) LED InLine measurement devices with state–of–the–art technology. The devices are used on conveyor belt, in pipelines (connection via flowthrough measuring cell or flange) and in tanks / vessel. Through the modular construction (Sensor and evaluation unit are separate), the sensor can be installed at a difficult accessible places and the evaluation unit can be installed at a well accessible place. This ensure the easy handling. The modular construction makes the operation of the HK8– Series very easy.

Microwave measurement device, Continuous In Line measurement of dry matter The measurement is contactless, the measured values of the %, %H2O,%TS, Bx, g/cm3, g/l or mg/l content are available as digital and analogue values. The HK2 is applicable in different industries like sugar, sewage plant and building material industry. Because of further increasing quality requirements after ISO and EU standards, the industries have an enhanced demand for improved quality control, standardization and InLinetrend observation.

Microwave measurement device, Continuous InLine measurement of dry matter or consistency Description At the microwave measurement technology an electromagnetic wave with very low energy is generated. This signal is coupled via an antenna into the product (Cellulose, Cheese, Milk, Curd, etc.). Depending on the dielectric properties of the product the signal propagates in the product. After the signal has passed the product a second antenna receives the signal (Transmission). Amplitude and phase shift of the received signal are an expression for the consistency, water content or dry matter of the product. The microwave measurement is very stable and it has a quick response to product changes.

Our product range includes spiral hoses, PA / PUR / PE hoses, PVC hoses with and without fibre, soft PVC hoses, fibre reinforced PUR hoses and PTFE hoses. Furthermore we offer anti-static hoses, spark erosion protected PU hoses, compressed air hoses, autogenous hoses, suction and pressure hoses and hoses especially for use with water. The assortment is rounded out by hose rupture valves, hose winders and cable winders, hose terminal blocks, hose cutters and hose holders. For every intended use we have the right material and the matching hose size.

Our assortment contains a range of pressure controllers for regulating the water pressure required for your application. In addition you will find filters for water treatments here. Water treatment is generally considered the targeted change of water quality. Here it is differentiated as to whether substances are removed from the water or added to the water. Water treatment represents an important process step in the production of drinking water for human use. Furthermore we have proportional control valves especially for use with water. There are various accessories and spare parts available for the mentioned products.

With the EASYPRO, you get a customised system for monitoring and controlling the water parameters in your swimming pool. The TOPAX® MC multi-channel controller continuously measures the water parameters and keeps them within the target range. It controls numerous actuators and control elements and is simple and intuitive to operate. Multi-coloured LEDs provide a visual warning if the water parameters are outside the target range. . Multi-channel controller TOPAX® MC . Measuring cells and measuring cell fittings . Sample water filter . Flow monitor . Flow controller DFR 45 with sample water tapping point and built-in temperature sensor . Inlet and outlet tap . Holder for buffer solutions and buffer solutions for adjusting the measuring cells . Multicoloured LEDs . Cover bonnet Some of the measuring cells are packaged separately and are not pre-assembled.

LIPP drinking water tanks for water supply companies are offered together with our project partner Kurz Leitungsbau GmbH. In doing so, we meet the highest standards applicable to the supply of drinking water, from planning and conception up to construction. Our automated welding process for high alloy stainless steels based on the LIPP System enables us to offer tanks with a maximum volume of 10,000 m3. In addition, on site production “off the production line” enables construction to be completed within the shortest possible time. Optimum quality thanks to automated welding process Material savings and additional stability thanks to circumferential profile Short construction times thanks to mechanised production Easy to maintain and clean Low investment and maintenance costs Can be set up indoors or in the open air Turnkey complete solution or components

Water Retention Box made of recycled PP material. With high temporary and possibly permanent retention volume in combination with a Flow Control System for specific regulation of water discharge and/or water storage.

Pressure regulator of the compact series for water Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Pressure range up to 15 bar

Filter + filter water separator Sizes: 1/8" and 1/4" Filter fineness: 5 µm + 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 370 Nl / min Pressure range up to 15 bar

The diaphragm dosing pumps in the MEMDOS MR series have been developed for a wide range of applications in dosing technology. They are ideal for use in industry, process engineering, water treatment and waste water treatment. Features: . Robust dosing head: Made of PP and stainless steel for high durability and longevity. . Precise dosing: Double ball valves (up to MR 290) and spring-loaded flat-seat valves (from MR 290), optional spring-loaded single ball valves. . Safety: Separation chamber with drainage tube between dosing head and gearbox protects against leaks. . Flexible stroke adjustment: Can be adjusted manually or electrically (ATE). Optional extensions: . Dual dosing pumps for increased performance. . Stroke counting with inductive sensor for precise batch processes. . Frequency inverter control for variable control.

Radiator hose, suitable for water, acids and diluted bases. The hose retains its inside diameter even when it bends and, due to its structure, largely replaces any hose bend.

Production of individual water coolers according to customer requirements. Oneoff or series production with highperformance cores in core depths of 18110mm

Product group: Dyes CAS-Nr.: [150347-59-4] Storing temperature: -20°C GHS pictogram: GHS07 Shipping condition: ambient MW: 557.46g/mol Formula: C29H19NO11

Storing temperature: 2-8°C Shipping condition: ambient

- Made of polyether-polyurethane - Color black (red, blue, green, white) - External calibration; for use with Eisele plug connectors - Operating temperature -31 to 194 °F (-35 to +90 °C) - Suitable for compressed air, water - Free of plasticizers, PWIS, halogen, copper and PTFE - Impervious to buckling and drag chain compliant - Resistant to UV, hydrolysis and microbes - Flame-retardant according to UL94 V0 to V2 - Suitable for employment in welding - Suitable for vacuum

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -20 to +120 °C - Working pressure range: -0.95 to 16 bar - cooling water, air, vacuum

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FKM - Material: AL, seawater-proof - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 psi (-0.95 to 16 bar)

Boiler feed water The so called „Boiler feed water“ is stored in a feed water tank and continuously feeded to the boiler of a steam generator. A big quantity of feed water is needed for example in steam power plants. The boiler generates steam, which is used for heating, for chemical processes or for driving a steam turbine respectively a steam engine. The feed water is purified in a way, that all harmfull components for the boiler are removed or neutralized. Leakages and evaporation loss are compensated by additional water which is purified in the same way than boiler feed water. Very often, valuable well and potable water resources are used for the generation of process water. Environmental regulations restrict this usage of well and potable water continuously and increase the costs for this resources steadily. The conditioning of stream water to boiler feed water helps saving potable water and means cost advantages. The process of conditioning is based on ultra filtration with down

Complete deionisation with electro deionisation With electro deionisation, permeate of reverse osmosis or other process waters can be completely demineralised. According to the VGB recommendations, a max. conductivity of 0,08 µS/cm is allowed for fully demineralised water.

Complete desalination with ion exchangers With ion exchangers, permeate of reverse osmosis or other process waters can be completely demineralized. According to the VGB recommendations, a max. conductivity of 0,08 µS/cm is allowed for fully demineralised water.

Reverse osmosis used for surface water treatment For the retention of dissolved salts and low-molecular Components, nanofiltration or reverse osmosis is suitable. With nanofiltration, multivalent ions and low-molecular components like e.g. humic substances can be retained. Nanofiltration can be used for reduction of hardness, separation of phosphates and sulphates, as well as for reduction of COD and DOC. With reverse osmosis – additionally to the nanofiltration – monovalent ions can be retained. Generally, with reverse osmosis very good retention rates for DOC can be reached, which especially matters at power plant applications.

Ultrafiltration of surface water For separation of dissolved substances, ultrafiltration is applied apart from conventional pre-filters (sand and gravel filters). So, all solids and even bacteria, viruses, germs and colloidal components (iron, orthosilicic acid) are retained.

Mold Cleaner 40-1015 Lemon dissolves pollutions like: oils, greases, waxes and resins, even cured ones. Mold Cleaner40-1015 Lemon will remove the sealer form mold surfaces. Mold Cleaner40-1015 Lemon does not evaporate. Residues have to be cleansed with a quick cleaner (e.g.: fluid 010, Cleaner ES). A removal with water is also possible.

grease 200 is a H1 registred, transparent, soft grease. It is water- and steam-resistant and stable to oxidation and ageing. The operating temperature range of grease 200 is between -20°C and +130°C, but should preferably be used to a max. temperature of 100°C. Above this temperature the viscosity will slightly drop. grease 200 is a cost-effective lubricant.