Rods - Import export

Elastomeric wipers/scrapers are used in combination with the MANOY® sliding ring, the MANOY® U‑Cup or other rod seals.

The standard version is universally usable, but in special cases the light version can offer additional advantages. The light version is suitable for tight installation conditions and is also easier to fit in nonsplit grooves.This version reduces the friction. The low compression reserve with a negative effect on large tolerances must be considered.

Hydraulic and pneumatic cylinders, Presses, Shock absorbers, Fittings, Controls, Piston and plunger pumps, Mobile hydraulics, Injection units

stainless steel*ground surface*Ø 12 mm

stainless steel*ground surface*threaded M 10*Ø 12 mm

steel, zinc plated*Ø 12 mm*

steel, zinc plated*threaded M 10*Ø 12 mm

1 internal /*1 external thread M 10*Ø 12 mm*size of jaw 10 mm

Rod gripper with a neodymium magnet in a steel housing. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The rod gripper has no thread and is usually glued or pressed in.

Rod gripper with a neodymium magnet in a brass housing. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The rod gripper has no thread and is usually glued or pressed in.

The rod lock BS is a mechanical device for securely locking the piston rod in any position in the event of a pressure drop. For cylinders with a design according to ISO 15552 and 6432 VDMA.

Standard-Rods sorted by Outside Ø. All dimensions in mm.

These are the accssories made by aluminum,which is used in many fileds, such as building industry,door locks, door handles and so on .

More space to work – let the rods out! In particular applications, it can be necessary that the rod leaves the clamping head, e.g. for reasons of accessibility or restrictions regarding space that do not allow a rod that is permanently in place. Especially in applications where moulds are closed and kept closed against high forces with the SITEMA PowerStroke, it is a big advantage when the rod can leave the clamping head. Thus, the rods are no obstacle when taking finished parts out of the mould or when handling parts. With certain modifications, most of our series can be adapted as special designs to allow the rod leaving and re-entering the clamping head. We have already realised a great number of such solutions for vertical and horizontal applications. Contact us for more information!

igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm When to use it? When you want to save weight When rotating, oscillating and linear movements should be implemented When high-frequency oscillations/vibrations predominate When a low-noise operation is desired When an electrically insulating part is required When freedom from corrosion is desired For combinations with pneumatic cylinders and gas struts When chemical resistance is required When high stiffening is required When not to use? When you have temperatures above +80°C (then HT options) When rotation speeds in excess of 0.5 m/s should be implemented When very high tensile and lateral loads prevail When applications should be implemented with hydraulic cylinder When dimensions over 30 mm are needed igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm Special properties of the igubal® rod end bearings Maintenance-free, self lubricating High stiffening Very high fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight Dimensional series K and E, dimensions according to DIN ISO 12240 Version with metal sleeve in the spherical ball for enhanced torque Tolerances igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9. Please contact us in case you require lower or more bearing tolerances. Loads igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing. In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft. Delivery program igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the Form A - with male thread and Form B - with female thread The dimensional series K and partly E are moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).

Category Hydraulic systems, valves and components / Hydraulic cylinders / Accessories / Rod ends for rod Product number supplier 45510012

Category Hydraulic systems, valves and components / Hydraulic cylinders / Accessories / Rod ends for rod Product number supplier 45510010

Chrome coating at least 2 x 20 µm, 20MnV6, fit f7, Corrosion resistance at least 500 hours ISO 9227-NSS, Rating 9 - ISO 10298 Material Dimension range 20MnV6 20,0 - 100 mm

Material Dimension range CK45 4,0 - 250 mm 20MnV6 8,0 - 200 mm 42CrMo4V 18,0 - 140 mm 1.4057 20,0 - 140 mm

Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

The MBS hydraulic cylinders of the MZR-1004 series are synchronized cylinders for use as actuating and control cylinders. All cylinders work with low friction and run stick-slip-free. The connection is made via a head flange attachment and a threaded attachment on the piston rod. For flexible use, fittings for pipe fittings according to BSPP ISO 1179-2 and venting connections are available on both sides. Lift and piston rod protrusion are also variable selectable. Our cylinders are prepared for use with position sensor and position monitoring. With the exception of the piston rod and the centering surfaces, the entire cylinder is protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of the types H, HL and HLP according to DIN 51525-1. If you have any questions about areas of application or other options, we are...

Of base material 280X equal 20MNV6, fit f7, with 30 µm Nickel + 20 µm chrome coating Material Dimension range NIKROM 350 20 - 140 mm

Design of the housing in the form of a groove should be avoided if possible. If this is not feasible, good housing and seal cleanability must be guaranteed. The hygienic design requirements can be met by having a particularly large groove base radius, avoiding notches and having a split housing. For WIP/WOP cleaning it is important to be able to remove and replace the seal without damaging it. Given a suitable machine design, cleaning in place is also possible.

The main applications are liquids at very high pressure. This seal can also be used for gases if the maximum operating parameters are restricted.

The MANOY® U‑Cup is a pressureactivated sealing system. This means that the total sealing force is only ever as high as required to seal the prevailing pressure. This friction optimization saves energy.The MANOY® U‑Cup seals gases and liquids and also highviscosity fluids and pastes in a nonstandard version

These sliding rings are the solution for designs which only allow room for a small or low housing, but require an operating pressure up to 80 Mpa. They are ideal for retrofitting into existing O‑ring grooves

The tandem configuration of type 116 allows static pressure maintenance in the critical unpressurized range and at low pressure. The security of this function is guaranteed by use of the IDG materials U95, U96 or U99 on the low pressure or atmospheric side.

It features a quick start plug-in system that allows you to turn it on simply by plugging it together, which makes it an easy-to-use and complete system. Also the Rover rod features satellites such as GPS, GLONASS, Galileo, BeiDou, and more, ensuring that you get the most accurate readings possible. It also comes equipped with a powerful Helix antenna and Bluetooth connection to the rover rod up to 50 meters, eliminating the need for any annoying cables. The transport length of the rod is only 104cm, making it easy to carry around. It is robust and absolutely waterproof with a protection class of IP68, and it also features an integrated battery that can last for up to 10 hours with a percentage status display. This high-quality product is made in Schleswig-Holstein by Thomastechnik GmbH.

Low cost noise reduction Effective damping Resistance against mineraloil