Rods - Import export

The rod lock BS is a mechanical device for securely locking the piston rod in any position in the event of a pressure drop. For cylinders with a design according to ISO 15552 and 6432 VDMA.

igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm When to use it? When you want to save weight When rotating, oscillating and linear movements should be implemented When high-frequency oscillations/vibrations predominate When a low-noise operation is desired When an electrically insulating part is required When freedom from corrosion is desired For combinations with pneumatic cylinders and gas struts When chemical resistance is required When high stiffening is required When not to use? When you have temperatures above +80°C (then HT options) When rotation speeds in excess of 0.5 m/s should be implemented When very high tensile and lateral loads prevail When applications should be implemented with hydraulic cylinder When dimensions over 30 mm are needed igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm Special properties of the igubal® rod end bearings Maintenance-free, self lubricating High stiffening Very high fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight Dimensional series K and E, dimensions according to DIN ISO 12240 Version with metal sleeve in the spherical ball for enhanced torque Tolerances igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9. Please contact us in case you require lower or more bearing tolerances. Loads igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing. In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft. Delivery program igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the Form A - with male thread and Form B - with female thread The dimensional series K and partly E are moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).

Category Hydraulic systems, valves and components / Hydraulic cylinders / Accessories / Rod ends for rod Product number supplier 45510012

Category Hydraulic systems, valves and components / Hydraulic cylinders / Accessories / Rod ends for rod Product number supplier 45510010

Material Dimension range CK45 10,0 - 140 mm 42CrMo4V 16,0 - 180 mm

Chrome coating at least 2 x 20 µm, 20MnV6, fit f7, Corrosion resistance at least 500 hours ISO 9227-NSS, Rating 9 - ISO 10298 Material Dimension range 20MnV6 20,0 - 100 mm

Material Dimension range CK45 4,0 - 250 mm 20MnV6 8,0 - 200 mm 42CrMo4V 18,0 - 140 mm 1.4057 20,0 - 140 mm

Of base material 280X equal 20MNV6, fit f7, with 30 µm Nickel + 20 µm chrome coating Material Dimension range NIKROM 350 20 - 140 mm

Double-acting pneumatic cylinder with piston rod in a special design for use in a press-in device.s

The stopper cylinders are developed to stop or block moving parts, e.g. in an assembly line. The large dimensioned piston rod also allows use as a stand-by stop device.

The rod lock BS is a mechanical device for securely locking the piston rod in any position in the event of a pressure drop. With manual unlocking.

Cylinder with double piston rod as anti-rotation device against linear movement of the piston rod. Design based on ISO standard. Available sizes diameter: 32, 40, 50, 63, 80, 100 mm.

It features a quick start plug-in system that allows you to turn it on simply by plugging it together, which makes it an easy-to-use and complete system. Also the Rover rod features satellites such as GPS, GLONASS, Galileo, BeiDou, and more, ensuring that you get the most accurate readings possible. It also comes equipped with a powerful Helix antenna and Bluetooth connection to the rover rod up to 50 meters, eliminating the need for any annoying cables. The transport length of the rod is only 104cm, making it easy to carry around. It is robust and absolutely waterproof with a protection class of IP68, and it also features an integrated battery that can last for up to 10 hours with a percentage status display. This high-quality product is made in Schleswig-Holstein by Thomastechnik GmbH.

Chrome coating at least 20 µm, fit f7, Hardness of chrome coating (HV 0,1 / HV 850-1100) 500 hours in NSS test, rating 10 Material Dimension range INFINITY 20,0 - 120 mm

Cylinders with Ertalyte piston rods are particularly suitable for use in the food and chemical industries. High resistance to acids, good electrical insulating properties, wear resistance, excellent sliding properties and even resistance to gamma rays or X-rays allow it to be used under difficult conditions. For the use of pneumatic cylinders in environments with radioactive radiation, we also stock cylinders with radiation-resistant seals.

Single-acting pneumatic cylinder with two parallel working piston rods made of brass, nickel-plated or stainless steel.

BIEGLO offers PAI rods from different PAI types, Torlon® 4203; 4301; 4275; 4435; 4645; 5030 (30% GF); 7130 (30% CF), where each type is best suitable for a specific application. The unique performance of polyamide-imide (PAI) is the result of being transformed from a thermoplastic to a cross-linked thermoset during an extended curing process. Our PAI is processed by experienced engineers and offeres the best possible values a PAI product can have and it is suitable for many applications as gears, rollers, plasma chamber hardware and wafer contact fixtures.

PEEK is the ideal replacement for metal and other plastics due to its high temperature resistance of up to 240°C , excellent chemical and wear resistance. The Dexnyl PEEK rods of BIEGLO offer resistance to elevated temperatures, radiation and chemicals. Their dimensional stability and mechanical strength are second to none. Our PEEK has an excellent hydrolysis and electrical insulation. BIEGLO offers natural, colored and tribological modified PEEK with superior sliding properties and abrasion resistance. We offer a wide range of PEEK rods diameter starting at 6mm to 100mm. Our PEEK rods are also available made of compounded PEEK.

BIEGLO is the official distributor of Saint Gobain Performance Plastics for the Meldin 7000, Polyimide rod. In line with different requirements of the Industrial market, the Meldin product family can provide high temperature resistance, wide chemical resistance, good mechanical properties also at elevated temperatures and low wear, long lifetime. Polyimide rod can be used in temperatures up to 350°C continuously and it has various applications in the automotive, aerospace and electronic industries. Polyimide rods have a standard length of 965mm. The diameters of the solid bars are distributed from 6.3mm to 82.5mm.

BIEGLO is the official distributor of Saint Gobain Performance Plastics for the Meldin 7000 product line semi-finished products. Our polyimide semi-finished products meet the highest demands of various industries, such as the aerospace or the automotive industry. The polyimide semi-finished products are available as solid rods or sheets. Tubes can be produced as short, direct formed pieces. Polyimide semi-finished products are available in various compounds, for example with PTFE or graphite for better coefficients of friction. Polyimide sheets are available in the standard size 305mm x 305mm and a thickness of 1.6mm up to 50.8mm. Polyimide rods have a standard length of 965mm. The diameters of the solid bars are distributed from 6.3mm to 82.5mm.