Points - Import export

Floor box 8810B made of polished stainless steel for 10 units. It can be installed at any point in the floor, as pipes are used for the line feed. Because of its low height, this version is particularly suitable for floors in old buildings. The rimless lid also closes when the plugs are inserted and is designed for sticking on floor coverings. Further equipment variants on request.

QuellTech Solution: The performance of a manual inspection cannot be compared with the speed and the repeatability of a contactless QuellTech Q4-1000 laser scanner. It is even possible to install several instruments in parallel to cover the whole width of the ingot with one single scan. These instruments are mounted on an existing portal and correctly synchronized, so that interaction of the laser light originating from the other scanners is excluded. The QuellTech laser line scanners produce 3D point cloud of the raw ingot surface, and the software calculates the coordinates of the highest and deepest levels of this surface. After scalping the flat surface can be scanned again for any defects. Benefits for the Client: Thanks to QuellTech’s wide area laser line scanners, the cycle times for ingot scalping could considerably be reduced, and excessive material scrap due to a too low scalping level is prevented.

Laser Scanner Solution: This task is a typical application of the high-resolution QuellTech 2D/3D Q5-880 Blue Laser Scanners. Two of these units are placed at the left and at the right of the measuring objects, at a defined inclination angle. Blue laser light in this case is a prerequisite, as the cast parts are red-hot, hence emitting in the red spectral range. Additionally, the client was in need of a software solution for the project, so a 3D point cloud processing application was implemented, performing inline and evaluating width, height and angle results. QuellTech customer is able to inspect continuously the product quality, simultaneously avoiding scrap. He uses the same system for more than 10 different types of castings. Errors caused by manual inspection are considerably reduced, and safety for personnel is enhanced.

The changeable centring tip for counter spindles Would you like to use your counter spindle temporarily as a tailstock, and then once again as a normal chuck? You can with the EWS CenterPoint Area of application: Lathes without tailstock and with a turret To support long tools Top changeable short taper 12 The top kit can be integrated in simple combination holders Prerequisite: Counter spindle with tailstock function Taper shank adjusted to GSP Machining process: Milling on the main spindle Switch to tip in GSP Use tip rotating Execute machining Remove tip from GSP Pass work piece to GSP, work second side

are designed to deliver cost-effective optimal joint performance for thin sheet metal applications. Tapered Thread Under Head Maintains full thread major diameter immediate to the surface Undercut Head Material extruded by the screw is absorbed while the under-head contact area is increased allowing for enhanced thread engagement and resistance to stripping Rounded Tip Provides easy entry into small holes with self-extrusion of the sheet metal as well as increase resistance to stripping Trilobular Build Provides resistance to loosening caused by vibration. Available with all Drive System Significantly extends tool life Ideal drive system for maximum torque transfer

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !!

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !!

Vibration dampers of the series GAB are especially used to stabilize your pipe system. You can use these elements to absorb thermal expansion of the pipes, too. These elements are often used in the field of plant engineering. Depending on the chosen series you are able to couple your system with this elements by a welding profile or a fork head. RG+ offers these suspensions in the following designs: GAB-( )-2 with one fork head on each site GAB-( )-5 with one fork head on one site and a welding profile on the other

With Novartos Multi double sampling, a double multi-point sample can be taken from multiple predefined sample zones. Depending on the lenght, four, seven or nine sample chambers are each fitted with two sample inserts for the double sampling.

The point bonded polyester fleece Cora®Dot is ideally suited for filtration of rolling oil by using of precoating agents.

Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection MOSH/MOAH-free

Grease lubrication of plain and rolling bearings at high temperatures and high loads, e.g. on hot-air fans, converters, pouring ladles, sintering systems, conveyor systems subject to heat etc. Advantages and benefits Excellently suited for reducing friction and wear, protection against corrosion and impurities Maintenance of lubricating effect even at high temperatures and loads Highly effective due to selected combination of active ingredients for good corrosion protection properties, good resistance to ageing and excellent EP properties

With Novartos Multi triple sampling, a triple multi-point sample can be taken from multiple predefined sample zones. Depending on the length, four, seven or nine sample chambers are each fitted with three sample inserts fot the triple sampling.

The "Stopper-Point" barrier is used in a wide range of applications. The flexible barrier post is easy to place and can be moved quickly and repeatedly. With a belt extension to all four sides, there are no limits in the barricading and demarcation. The belt can be extended to a length of 2.5 metres. Due to the dark colour, the belt easily separates from the posts and background so that the barrier cannot be overlooked. The belts remain securely hooked in during use. The high mobility of the barrier post is defined by its material properties. The entire stand is made of silver anodised aluminium. Due to the lightness of the aluminium the post weighs only 7.4 kg and is at the same time extremely stable. The stability is guaranteed by a base with a diameter of 33cm.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

Ideal for installation in platform scales and integration into machines: with the BCL-A single point load cell, you rely on proven quality from a leading manufacturer of industrial weighing technology. Suitable for load ranges from 300 g to 4.5 kg and a platform size of up to 300 mm × 300 mm.

The MP 55 Platform Weigh Cell is made completely from stainless steel, is available in a load range from 11 kg to 200 kg and platform sizes up to 600 mm x 600 mm. It is specially designed for integration into beltweighers, counting scales and checkweighers. Protection class IP68, IP69K Full stainless steel construction Hermetically welded seal (IP68, IP69K) Platform size up to 600 mm x 600 mm Approved to OIML R60 Ex-Version available (MP55/...E) High Input Impedance Integrated Mounting spacer

Ideal for installation in checkweighers: The single point load cell U2D1 is ideal for dynamic applications due to its design. Suitable for load ranges from 3 kg to 100 kg and a platform size of up to 200 mm × 200 mm.

Ideal for installation in platform scales and integration into machines: with the CB17 single point load cell, you rely on proven quality from a leading manufacturer of industrial weighing technology. Suitable for load ranges from 600 g to 3 kg and a platform size of up to 200 mm × 200 mm.

Spit nozzle SD 17: version for pin-point and linear application The pneumatically operated SD 17 is also available as a spit nozzle version. The fully spray valve has been specifically developed for pin point and linear application of oils, release agents and other low-viscosity media; it maintains its precision at certain distances between the nozzle and the application object. The spit nozzle SD 17 is particularly suitable for precision lubrication tasks of components and tools; it can also be setup for higher viscosities via an optionally selectable heating unit.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

The universal two-point controller is suitable for various applications due its easy handling and robust construction. However you can also use all customary industrial probes with current or voltage output with this unit.

The universal two-point PCB controller is suitable for various applications due to its easy handling and robust construction. It can process most industry probes with current, voltage, impedance or switching output.

The universal two-point PCB controller is suitable for various applications due to its easy handling and robust construction. It can process most industry probes with current, voltage, impedance or switching output.