Points - Import export

The changeable centring tip for counter spindles Would you like to use your counter spindle temporarily as a tailstock, and then once again as a normal chuck? You can with the EWS CenterPoint Area of application: Lathes without tailstock and with a turret To support long tools Top changeable short taper 12 The top kit can be integrated in simple combination holders Prerequisite: Counter spindle with tailstock function Taper shank adjusted to GSP Machining process: Milling on the main spindle Switch to tip in GSP Use tip rotating Execute machining Remove tip from GSP Pass work piece to GSP, work second side

are designed to deliver cost-effective optimal joint performance for thin sheet metal applications. Tapered Thread Under Head Maintains full thread major diameter immediate to the surface Undercut Head Material extruded by the screw is absorbed while the under-head contact area is increased allowing for enhanced thread engagement and resistance to stripping Rounded Tip Provides easy entry into small holes with self-extrusion of the sheet metal as well as increase resistance to stripping Trilobular Build Provides resistance to loosening caused by vibration. Available with all Drive System Significantly extends tool life Ideal drive system for maximum torque transfer

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !!

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !!

With Novartos Multi double sampling, a double multi-point sample can be taken from multiple predefined sample zones. Depending on the lenght, four, seven or nine sample chambers are each fitted with two sample inserts for the double sampling.

With Novartos Multi triple sampling, a triple multi-point sample can be taken from multiple predefined sample zones. Depending on the length, four, seven or nine sample chambers are each fitted with three sample inserts fot the triple sampling.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

Spit nozzle SD 17: version for pin-point and linear application The pneumatically operated SD 17 is also available as a spit nozzle version. The fully spray valve has been specifically developed for pin point and linear application of oils, release agents and other low-viscosity media; it maintains its precision at certain distances between the nozzle and the application object. The spit nozzle SD 17 is particularly suitable for precision lubrication tasks of components and tools; it can also be setup for higher viscosities via an optionally selectable heating unit.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

This B+B dew point controller with condensate formation is an electronic hygrostat which is used for detecting dew formation and beginning of condensation on objects such as pipes and windows.

The universal two-point controller is suitable for various applications due its easy handling and robust construction. However you can also use all customary industrial probes with current or voltage output with this unit.

The universal two-point PCB controller is suitable for various applications due to its easy handling and robust construction. It can process most industry probes with current, voltage, impedance or switching output.

The universal two-point PCB controller is suitable for various applications due to its easy handling and robust construction. It can process most industry probes with current, voltage, impedance or switching output.

Perfect for: Live communications Catering Hospitality Unique roof design Due to the architecturally sophisticated shape of the building, this mobile space solution stands out at any event. Its clear line, side heights of 2.80m and unique roof design makes the Cyclone a breath of fresh air in the event structures industry. It offers a new appearance from all four points of the compass, whilst inside, a feeling of space in a new dimension is created. Drainage as a design feature The roof is the stand-out design feature of this transparent structure. It’s flat, but tapers downwards like a cyclone with a slight increasing lateral curvature. A lovely design feature, that also functions as drainage. In the event of rain, water will be released into the ground via this revolutionary feature. As with all Losberger De Boer space solutions, the Cyclone can be combined with other structures, to form a complete tent landscape.

Multi sampler with several closed chambers, for multi point sampling from several predetermined sampling depths. Bürkle zone samplers are used for taking samples of bulk goods of any kind. The big advantage of zone samplers is that all-layer samples can be collected from all layers of the container. Various bulk goods can be collected with the lances, from the finest powder to large grains such as corn or nuts. The zone samplers are available in different lengths. 55 cm (only Multi, Uno and All-layer sampler) especially suitable for sacks, 85 cm long (especially for barrels, tubs, mixed containers) and 150 cm as well as 250 cm (only Jumbo sampler) for big bags, silos, tanks. Safe and reliable sampling is made even easier with useful special accessories such as sealing sleeves, Quali-Paper, cleaning brushes, emptying devices and close-it control seals. The zone samplers are available in different models for different sampling tasks.

Uno sampler made of stainless steel AISI 316L (1.4404)/PTFE with a closed sample chamber for point sampling from a predetermined sampling depth. Bürkle zone samplers are used for taking samples of bulk goods of any kind. The big advantage of zone samplers is that all-layer samples can be collected from all layers of the container. Various bulk goods can be collected with the lances, from the finest powder to large grains such as corn or nuts. The zone samplers are available in different lengths. 55 cm (only Multi, Uno and All-layer sampler) especially suitable for sacks, 85 cm long (especially for barrels, tubs, mixed containers) and 150 cm as well as 250 cm (only Jumbo sampler) for big bags, silos, tanks. Safe and reliable sampling is made even easier with useful special accessories such as sealing sleeves, Quali-Paper, cleaning brushes, emptying devices and close-it control seals. The zone samplers are available in different models for different sampling tasks.

Dip sampler for simple removal of liquid samples. Good view due to transparent tubes. Upper end with reflux valve, lower end with ball valve.

The ergonomic handle of the DispoTube makes it easier to work and facilitates a good grip even under difficult conditions, for example with gloves. Disposable sampler for taking samples of liquids.

The Suction Lances have the following Features: - G1 1/2" bis G2", screw cap, plug in flange, others on request - PVC- and Silicone-cable - ABS-enclosure - upto 3 NO, NC, 2 change over - overall length: upto 1.500 mm - Temperature range 0°C to +60°C - upto 0bar - upto IP64 - Options: non return valve

Unsere mechanischen Präzisionsmessuhren sind weitverbreitet und zeichnen sich durch die Verwendung qualitativ hochwertigster Bauteile aus. Dies garantiert Ihnen als Kunde eine lange Lebensdauer. Wir fertigen Messuhren nicht nur in den Standardausführungen, sondern bieten darüber hinaus auch immer den Service einer individuellen Anpassung der Messuhr an Ihre speziellen Wünsche an.

made from steel with carbide or ceramic insert with balls from steel, carbide, ruby, sapphire, plastic or ceramic

SUPER HAND is ultrasmall, ultralightweight; yet performs with the power and efficiency of a much larger tool to meet user requirements of filling, chamfering and other jobs. It comes with the quickchange tool points for different jobs. You can work on steel, glass, brass, aluminium, wood and other materials silently. It also handles scores of big jobs with speed and ease.

SUPER HAND replaces work. SUPER HAND is ultrasmall, ultralightweight; yet performs with the power and efficiency of a much larger tool to meet user requirements of filling, chamfering and other jobs. It comes with the quickchange tool points for different jobs. You can work on steel, glass, brass, aluminium, wood and other materials silently. It also handles scores of big jobs with speed and ease.

FEATURES & BENEFITS • Direct reading of dew point with calculated % carbon • Direct reading digital display of process dew point • Designed for use in heat-treat applications • Equilibrium %C computed with entered process temperature. Feature provides cross check for oxygen probe systems • CQI 9 compliant furnace atmosphere measurement • No interpretation errors • Short response times, even when moving between a high and low dew point process • Easy-to-use, simple operation, operator training in minutes • Rugged capacitive sensor • Long life rechargeable battery • NIST traceable calibration • Calibration certificate supplied with factory calibration

The ZPA 20 zeta potential analyzer is a laboratory measuring instrument for an accurate and fast zeta potential measurement, i.e., the charge near the surface in solution. It uses a patented measuring method based on the bidirectional measurement of the streaming potential or the streaming current. The ZPA 20 uses removable measuring cells for different types of materials. Therefore, plate-shaped samples as well as fibres and powders can be easily prepared and placed in the corresponding measuring cell. The ZPA 20 has measuring sensors for voltage, current, conductivity, pH, pressure, and temperature. Thanks to its powerful stepper motor, the ZPA 20 can make the electrolyte flow through the measuring cell at different speeds and pressures, alternately from opposite directions. This results in measurement results with high statistical accuracy. Concentration-dependent measurements can be realised with the optional LDU 25 liquid dosing unit.