Results for
MICRO-EPSILON
Germany
The standard sensor ACS1 is used for common measuring tasks. The transmitter and the receiver inside the sensor are arranged at an angle of 30°/0° to each other, producing a working distance of 50 mm. An optionally available adapter permits applying the sensor even in tactile measurements Measurement distance: 50 mm Measurement geometry: 30°x:0° Measurement spot: ø 9 mm
Request for a quoteMICRO-EPSILON
Germany
In addition to pure color measurements, intensity measurements, completeness and presence checks or the evaluation of surface properties are also possible with the color sensors from Micro-Epsilon. These powerful colorSENSOR CFO sensors enable 100% control in demanding, industrial measurement tasks and provide precise measurement results.
Request for a quoteMPT DOSING GMBH
Germany
Measurement and control In this sector, MPT represents the interests and products of WALCHEM Corporation in Holliston, Massachusetts (USA). WALCHEM is a leading manufacturer of sensor technology and controllers for the surface technology and for the water treatment technology, including pH-, redox and conductivity controllers as well as special controllers for the cooling-water and boiler water conditioning. Besides the measuring transducer, these controllers include also a control program, adapted to the respective application. Monitoring, alarming – control and telecontrol systems By default, WALCHEM’s WebMaster has available sensors and data amplifiers for various physical parameters. Using the integrated program the parameters can be linked to each other and to control parameters. Via telephone modem and Ethernet board the user is provided with information such as alarm messages and off-limit conditions worldwide. Measuring and control technology for dosing liquid media in
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the accessories used in Hydraulic valve assembly.
Request for a quoteIGUS® GMBH
Germany
Initiator cables, also referred to as sensor/actuator cables, connect control units and different sensors, or, in the case of reversal of the measurement principle, actuators. Frequently used abbreviations include ini or ini cable (plural: inis). Sensor or measurement transducers transform physical quantities such as rotation, speed, distance or length into analogue electric impulses. In the case of an actuator, the measured electric current (symbol: I, unit: ampere; A) or voltage (symbol: U, unit: volt; V) is transformed into temperature, pressure or torque. The connection cable consists of at least three cores with a small cross-section of between 0.14mm² and 0.34mm². In the simplest case, two cores are required for supplying the voltage, while the last core transmits an I/O signal. For sensitive applications, there are shielded versions in addition to the traditional ini cables to avoid EMC disruptions (electromagnetic compatibility).
Request for a quoteKLÖPPER-THERM GMBH & CO. KG
Germany
Temperature controllers and temperature sensors from Klöpper Therm are used in all electric heating systems in which the temperatures of the heated areas must be reliably measured and controlled with precision.
Request for a quoteEDDYLAB GMBH
Germany
■ Measuring on turbo vanes and shafts ■ TTL output for speed measurement ■ Analogue monitor output for gap control ■ High resolution ■ High dynamics ■ Low current consumption ■ High noise immunity
Request for a quoteDYMAX EUROPE GMBH
Germany
Highperformance conformal coating with secondary moisture cure for shadow areas. Features: - Cures with UV/Visible light - DualCure secondary moisture cure for shadow areas - Fluoresces blue under black lights - Excellent thermal shock resistance - High temperature flexibility - Excellent chemical and corrosion resistance - Good temperature/humidity (85/85) performance - One part formulation no mixing - Solvent free - Fast tackfree cure - Halogen free - MILI46058C Approved
Request for a quoteMICRO-EPSILON
Germany
The Industrial Performance Unit is a powerful computing platform for the efficient commissioning of Micro-Epsilon 3D sensors. The fully compatible controller is ideally suited to inline processes in 3D measurement tasks. The intuitive 3DInspect software with Valid3D technology enables simple and fast sensor parameter setting, which allows measurements to start immediately. The Industrial Performance Unit directly processes three-dimensional data, which is subsequently evaluated and assessed via the 3DInspect software. Results can be output via the integrated PROFINET, EtherCAT and EtherNet/IP interfaces.
Request for a quoteMICRO-EPSILON
Germany
3D sensors from Micro-Epsilon are equipped with an easy-to-integrate SDK (Software Development Kit). The SDK is based on the GigE Vision and GenICam industry standards including the following function blocks: Network configuration and sensor connection Extensive sensor control Transmission control of measurement images Management of user-defined parameter sets C++ sample programs and documentation Access to the sensor via GigE Vision is also possible without SDK using a GenICam client.
Request for a quoteMICRO-EPSILON
Germany
The IF2035 interface modules are designed for easy connection of Micro-Epsilon sensors to Industrial Ethernet controllers, e.g., plant control systems. The PROFINET and EthernetIP modules are compatible with sensors that output data via an RS422 or RS485 interface. These modules operate on the sensor side with up to 4 MBaud and have two network connections for different network topologies. Installation in switching cabinets is via a DIN rail.
Request for a quoteMICRO-EPSILON
Germany
Operating the optoCONTROL CLS1000 controllers requires sensors that are used on the measuring point. Depending on the measurement task, the sensors can be individually combined. The high-quality sensors with fiber optics are characterized by small installation dimensions and robust materials. This makes them particularly suitable for mechanical stress and harsh ambient conditions such as high temperatures. The sensor can also be used in restricted areas as the sensor head requires a minimum of installation space.
Request for a quoteMICRO-EPSILON
Germany
The optoCONTROL CLS1000 optoelectronic fiber optic sensor is suitable for use in automation thanks to its variable switching outputs. The CLS1000 is used for reliable position monitoring as well as for position and presence detection. The fiber optic sensor comprises a CFS sensor and a CLS1000 controller. The wide detection and operating ranges of up to 2000 mm make the fiber optic sensor ideal for the detection of components even at great distances. Due to the small design of the CFS sensors, the CLS1000 optoelectronic fiber optic sensor series is particularly suitable for use in confined installation spaces.
Request for a quoteMICRO-EPSILON
Germany
The operation of the colorSENSOR CFO controller requires sensors which are used at the measuring point. Depending on the measurement task, the sensors can be individually combined. Moreover, these high-quality sensors with glass fiber optics are characterized by small installation dimensions and robust materials. This makes them particularly suitable for mechanical stress and harsh ambient conditions such as high temperatures. Since the sensor head requires only little space, the sensor can also be used in confined conditions.
Request for a quoteMICRO-EPSILON
Germany
Modifying the standard eddyNCDT sensors is sometimes necessary particularly for small and large series. Therefore, we modify the measuring systems according to your specific requirements, e.g., changes to the cable, sensor material and design, and to the controller. In particular, sensors with integrated electronics in a miniature housing or special sensor designs are often requested by systems integrators.
Request for a quoteMICRO-EPSILON
Germany
The capaNCDT 6110 is a new, capacitive single-channel displacement measurement system comprising a compact controller, a sensor cable and the sensor. Due to the miniaturised controller and its easy operation, the capaNCDT 6110 is ideally suited to the integration in machines and facilities.
Request for a quoteMICRO-EPSILON
Germany
Application examples are often found where the standard versions of the sensors and the controller are performing at their limits. One of our special strengths is having the possibility to adapt our sensors to the individual requirements of our customers. The various measuring principles can be modified in different ways. Changes requested include, for example, modified measuring ranges, integrated controller, modified designs, mounting options or integration of different interfaces. Together we will find the best solution for your measurement task.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MICRO-EPSILON
Germany
The capaNCDT DT61x0/IP is an industrial-grade, capacitive sensor system for displacement, distance and position measurements. Consisting of a sensor, a sensor cable and a controller, the measuring system is ready for use without any on-site calibration. Due to its very good temperature stability, immunity to magnetic fields and robust design that is protected to IP68, the capaNCDT DT61x0/IP is used for industrial measurement tasks such as air gap measurement in generators and regulation of plant and machinery.
Request for a quoteMICRO-EPSILON
Germany
The confocalDT IFD2415 and IFD2410 are powerful confocal sensors with integrated controller. The space-saving IP65-housing enables fast integration into plant equipment and machines as no optical fiber is required. Furthermore, the IFD2410 and 2415 are ideally suited to high precision distance and thickness measurements in industrial series applications. In addition, the IFD2415 can be used with transparent materials for multi-layer thickness measurements of up to 5 layers. The active exposure time regulation of the CCD line enables fast and stable measurements of varying surfaces even in dynamic processes up to 25 kHz. The measuring system is also characterized by high luminous intensity which enables fast and reliable measurements even on dark surfaces.
Request for a quoteMICRO-EPSILON
Germany
The confocal chromatic confocalDT measuring system is used for fast distance and thickness measurements. Different sensor models and controller interfaces open versatile fields of application, e.g., in the semiconductor industry, glass industry, medical engineering and plastics production.
Request for a quoteMICRO-EPSILON
Germany
The optoNCDT 1320 is a new laser triangulation sensor with compact size for displacement, distance and position measurements. Due to its extremely compact size including integrated controller, the sensor can also be integrated into restricted installation space. Its low weight make the optoNCDT 1320 ideally suitable for applications where high accelerations occur, e.g., on the robot arm or in pick-and-place machines. The optoNCDT 1320 offers high accuracy and adjustable measuring rates up to 4kHz. The Active Surface Compensation (ASC) provides stable distance signal control regardless of target color or brightness. Very small objects can be detected reliably due to the small measurement spot size.
Request for a quoteMICRO-EPSILON
Germany
Application examples are often found where the standard versions of the sensors and the controller are performing at their limits. For these special tasks, the measurement systems can be modified according to the customer’s individual requirements. Changes requested include, for example, modified designs, target calibration, mounting options, individual cable lengths, modified measuring ranges or sensors with integrated controller.
Request for a quoteMICRO-EPSILON
Germany
The eddyNCDT 3005 is a compact inductive measuring system (eddy current) for precise displacement and position measurements. The system comprises a robust controller, a sensor and an integrated cable and is factory-calibrated either for ferromagnetic or non-ferromagnetic materials.
Request for a quoteBEDIA MOTORENTECHNIK GMBH & CO. KG
Germany
Temperature is one of the most measured physical parameters. Despite this, precise temperature measurement is one of the most difficult tasks in motor technology. To meet the constantly increasing requirements for improved motor performance, higher efficiency and reduced emissions, it is necessary to use reliable and precise sensors in modern motor control systems. The increased requirements over the last few years regarding measurement accuracy and reliability of temperature measurements has meant that many equipment operators must reconsider the suitability and performance capacity of their temperature measurement equipment. Resistant thermometers can be used between -200 °C and +850 °C. An important common property is that their output parameters are available in the form of electric signals that can be relatively easily transferred to measurement and control instruments for processing, storage and display.
Request for a quoteFRIEDR. FREEK GMBH
Germany
Thermo Sensors are needed in any controlled heating process. For various applications different types of thermocouples are obtainable. Most common are thermocouples (TC) and resistance sensors (RS). Both types are available in the same executions as a matter of princible. For non-contact measuring infrared sensors are the rights choice, either in stationary executions or as portable measuring instrument.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Pneumatic cylinders according to the norm, standard or special design, completely configured ready for installation and pre-assembled with add-on parts, bearing elements, compressed air connections, position sensors or control valves according to customer specifications.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Bentley-Harris® Textalu 1202 is an insulative fiberglass sleeving with a heavy aluminum coating designed to protect components in high temperature areas. It provides superior insulation to components that must maintain stable temperatures to assure performance efficiency. Textalu 1202 is used on wire harnesses, sensor control wiring and cable assemblies in close proximity to engines and exhaust systems. Due to its elastic structure, Textalu 1202 conforms well to the variable profiles of the components it protects. Its braided construction allows good flexibility in temperatures as low as -50°C. The infra-red emissivity rating of Textalu 1202 heavy aluminum coating, combined with its fiberglass braid, ensures temperature stability inside the Textalu sleeving despite frequent external temperature fluctuations due to radiant heat.
Request for a quoteVKF RENZEL GMBH
Germany
Our sensor-controlled wall disinfectant dispenser "Sensor-Wall II" is a flexible and extremely user-friendly dispenser for hygienic dispensing of hand disinfectants. The operation is contactless thanks to the integrated sensor. Simply hold your hands under the sensor for 2 seconds and your hands will be moistened with liquid disinfectant. In addition, the dosage quantity can be adjusted in 3 steps. Especially practical is that our dispenser "Sensor-Wall II" has an integrated but removable tank with a capacity of 1,000 ml. The hygiene dispenser is therefore not dependent on any particular bottle size or shape. As an option, an A4 click frame can also be mounted above the wall dispenser. This stand is operated with the mains adapter included in the scope of delivery or optionally with 6 AA batteries (not included).
Request for a quoteWEBER FOOD TECHNOLOGY GMBH
Germany
The smart solution: Fully-automatic defatting machine ASD 460 enables removal of fat layers from loins and cutlets in predefined strengths. Advantages Fully-automatic recognition of the fat strength using Weber camera technology, with programmable controlled movementalong longitudinal profile Continuous work process Sensor-controlled electronic spring for perfect pressure application Uniform fat layers Considerable minimisation of reworking (trimming) Back bacon instead of small trimming cuts Clearly improved product image for cooking after slicing Product-specific blade holders Combinable with pre-installed derinder Options: Special Weber transport rollers Product-specific blade holders Product-specific pressure devices for products withand without bones Fixed or adjustable guide plates for supply and output belts
Request for a quoteResults for
Sensor control - Import exportNumber of results
88 ProductsCountries
Company type
Category