Hydraulic connection - Import export

Hydraulic Shears and Spreaders for connection with an hydraulic pump

P-60-CK - hydraulic crimping head, 60 kN, CU300mm² for exchangeable dies series "60-CK", "22" for connecting with an hydraulic pump working pressure: 700 bar (10.000 PSI) Characteristics Single acting hydraulic head for connecting at a hydraulic pump Quick coupler system CEJN series 115 with dust protection cap for changeable compression dies NEW! The P-131 series with mechanical stop. Mo demage by using without dies!

P-131-C26 - hydraulic crimping head, 130 kN, CU300mm² for exchangeable dies series "130-C", "13" for connecting with an hydraulic pump working pressure: 700 bar (10.000 PSI) opening jaw: 26 mm Characteristics Single acting hydraulic head for connecting at a hydraulic pump Quick coupler system CEJN series 115 with dust protection cap for changeable compression dies NEW! The P-131 series with mechanical stop. Mo demage by using without dies!

The MBS standard cylinder series is characterized by a variable and stroke-independent welded construction. Due to the uniform force transitions between the different sizes and the different connection situations, they are often used in the areas of mobile and stationary hydraulics. Cylinder connection is via welded rod ends and bolted radial bearings. Connections with threaded holes for pipe fittings according to BSPP ISO 1179-2 are planned. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the data sheet for detailed information:

The MBS hydraulic cylinder MZR-1008 is designed as a discharge cylinder of direct support systems on mobile devices, such as Cranes have been constructed. The integrated position measuring system enables the exact position of the support cylinder to be detected. This is hydraulically fixed in connection with the piped double check valve. The cylinder connection is via plain bearing bushes. There are connecting bores for pipe fittings according to BSPP ISO1179-2 in the valve block. Hub and piston rod overhang are variably selectable. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the data sheet for...

Brochure High Pressure Washer Metropolis Hydraulic driven high pressure washer for connecting at an hydraulic circuit. water pressure max. 210 bar For cleaning in areas without infra structure ( no electric ) Water pump with three ceramic pistons Hydraulic engine group 2 (6ccm) Adjustable water pressure Perfect for built-in solutions at concrete transport trucks, tractors, street-cleaning trucks or concrete pumps Low noise - low maintenance - low vibrations For cleaning machines at the construction Suction lift max. 5 meters Water connection: 3/8“ Max. water temperature: 50°C optional for chemicals and pesticides Water-Bypass-system Optioanal: Elektric ON/OFF true integrated 12 Volt solenoid valve. This version has an Oil-Bypass. Type Water Output Spin Power Oil Input Weight WHY-1520 15 L/min. @ 210 bar 1750 rpm 5,5 kW 15-40 L/min. @ 210 bar 8-9 kg THY-2715 27 L/min. @ 150 bar 1750 rpm 5,5 kW 15-40 L/min. @ 210 bar 10-11 kg The METROPOLIS unit is a professional...

The MZD 60/6, MZD 60/6 D, MZD 60/6 W and MZD 60/6 D-W portable clinching pliers are hand-guided machines. These ECKOLD pliers come with a large throat and a high press force, which makes them the ideal tool for all clinching options. They can be customised with exchangeable tool holders for a wide range of applications. The clinching pliers have been specially designed for mobile use and come with a single-acting hydraulic cylinder producing a press force of max. 60 kN or 80 kN. The pliers are connected to the hydraulic unit with a 6 m hydraulic hose and a hydraulic drive unit. The various pliers are customised for specific applications. Contact us for specialist advice about our tool options for your joining tasks. Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task. Contact us for a customised offer, tools included!

Flange Body Ball Valves with Butt Weld Ends BBVF2A ▪ Two-way high-pressure round body ball valves designed for use as on/off devices for hydraulic applications ▪ With flange connection according to STAUFF standard and butt weld ends ▪ Pressure range: up to 345 bar / 5000 PSI (depending on size and material combination of the ball valve)

Description The multi-coupling has been created for connecting and disconnecting several hydraulic lines at the same time. This is done by an operating lever the guide crank of which is designed for a minimum of operating force. The connection of the hydraulic lines is done with flat face couplings. Due to the secial sealing it is possible to couple against trapped pressure on the male halves (max. 4x100 bar/ 5802 PSI) The main features of the multi coupling are: · Safety against commutability of hydraulic lines · Quick connecting · Coupling against trapped pressure · Optimally minimized leakage during coupling process Working Pressure 250 bar / 25 MPa / 3626 PSI Material Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE, PU

Pressure of the nitrogen surface 50-200 bar - pressure output 200 bar - Hydraulic connection to our UNI Future 2050 pressure at 850 bar infinitely adjustable The charging time of a 18 liter pressure reservoir with 200 bar operation pressure is about 1,5 minutes if the pressure loss in the storage is 20 bar (180 bar) and output pressure of the nitrogen bottle is up to 200 bar. At a output pressure of 50 bar the charging time is about 4,5 minutes. !!!TARGET PRICE!!!

Safety cutting unit consisting of: Hydraulic power unit cube Integrated pressure gauge up to 1000 bar 10m High pressure hydraulic hose (metal free ), firmy connected to the cutting head Superlight cutting head ipr50HS Remote Control 3m Power charger 3m User manual Tool case The total weight of our 95 securty system weights about 17 KG and not 30 KG!

Can be connected even with residual pressure in plug side hydraulic line. This Cupla is best for frequent connection of pressurized hydraulic lines. Super HSP Cupla socket can be connected easily with small power to standard HSP Cupla plug even with residual pressure on the plug side of the hydraulic line. For impact resistance, especially repeated impulses, special quenched steel is used for the body. This ensures original performance over a long period. The design reduces pressure loss, and so particularly suitable for hydraulic applications where enough fluid flow is essential. Both socket and plug have builtin automatic shutoff valves to prevent fluid spill out on disconnection.

Quenched special steel body! Powerful impact resistance, especially against impulses. Valve is designed to suppress pressure loss, particularly suitable for hydraulic applications which need big fluid flow rates. Automatic shutoff valves in both socket and plug prevent fluid spill out on disconnection. Easy to handle. In addition to conventional female thread type, male thread types (male tapered thread, male parallel thread with 30˚ flare, and male parallel thread with 30˚ coneseat) are newly added. Male thread types are designed especially for direct connection to hydraulic power units effectively. Male parallel thread type complies with both metal seal and Oring seal. (In case of Oring seal, Orings available in the market can be used.) Optional HSPDC Cuplas are available for diecasting machine applications with severe pressure variation. The overall length of male thread type is shorter than that of female thread type plus conversion nipple available in the market.

Deployment Miniaturized 3/2-way cartridge valve in the 8 mm Spider series.This valve can be used as a pneumatic pilot valve or for direct control for precise metering of gases or liquids. Benefits This very compact valve is suitable for direct mounting in a valve block. All pneumatic or hydraulic connections can be integrated in the valve block.

Siempelkamp has developed the energy-ecient drive system EcoDrive for the ContiRoll® main drives. This system meets tomorrow’s legal and standard demands on the energy eciency of drive systems already today. It comprises frequency converters, motor and gearbox - all well-tuned to one another. In addition to the energy eciency our R&D-work focussed on an improved precision and controllability of the entire drive system. The focus is on high belt speeds, precise r.p.m. for a synchronous operation of the steel belts, torques adjusted to the characteristic load line in connection with the hydraulic pressure/position control, good performance, good uptimes and ease of maintenance. This corresponds to the demand on a very high product quality and an on-demand energy consumption even in partial load operation. This new drive system is able to save more than 10 % of the electrical drive energy compared to traditional Solutions.

The 2/2way externally controlled valves are pneumatically or hydraulically operated valves with two connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 2/2way externally controlled valves are pneumatically or hydraulically operated valves with two connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 3/2way externally controlled valves are pneumatically or hydraulically operated valves with three connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

Bulk handling of any kind in sea and inland ports or storage facilities. For ship-to-ship, ship-to-storage/wagon/silo handling. For various types of handling machinery (mobile, stationary, crawler or portal) designed to be connected to hydraulic attachments. Technical design Half-closed or closed grip; with 2 or 4 cylinders Optimisation of machine load capacity thanks to its lightweight design which can hold maximum loads Grab drive: Hydraulic hoses connect the materials handling machine to the grab Closing and opening movements are controlled by the materials handling machine Closing and opening movements controlled by directly connected hydraulic cylinders Grab connection bearing Re-greaseable, robust steel bushing bearing Stable, torsion-resistant shells adapted to material flow: Shell plates made of S355J2+N Cutting edges made of special, highly wear-resistant steel

The 2/2way externally controlled valves are pneumatically or hydraulically operated valves with two connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

Handling general scrap, steel chips, shredder scrap, wood chippings and much more, in sea and inland ports and at storage facilities. For various types of handling machinery (mobile, stationary, crawler or portal) designed to be connected to hydraulic attachments. Technical design Open, half-closed or closed grip; with 2, 4 or 5 shells Optimisation of machine load capacity thanks to its lightweight design which can hold maximum loads Grab drive: Hydraulic hoses connect the materials handling machine to the grab Closing and opening movements are controlled by the materials handling machine Closing and opening movements controlled by directly connected hydraulic cylinders Grab connection bearing Re-greaseable, robust steel bushing bearing Stable, torsion-resistant shells made of: Shell plates made of S355J2+N Welded shell tips made of special highly wear-resistant steel

The 2/2way externally controlled valves are pneumatically or hydraulically operated valves with two connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

Slag handling in waste incineration plants or incineration plants of any kind. For various types of cranes with internal or external holding cables. Technical design Designed as a discharge grab with stable, retracted pivot bearings Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Closing and opening movements controlled by directly connected hydraulic cylinders, with stable piston rod protection Grab connection bearing Re-greaseable, robust steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system Grab shells: Shell design adapted to material flow Toothed segment drive Material: S355J2+N

Waste incineration plants, refuse-derived fuel (RDF) incineration plants or incineration plants of any kind. For various types of cranes which operate using hooks or rope/chain suspension. Technical design Open shell design Suitable for handling all kinds of waste Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Closing and opening movements controlled by directly connected hydraulic cylinders, with stable piston rod protection Grab connection bearing: Re-greaseable, robust steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system Stable shell structure with shells made out of S355J2+N

Power units and Control Systems Ruhfus Systemhydraulik GmbH specialises in the production of special solutions in the field of hydraulic units for industrial use. In order to be able to optimise the product to meet your requirements, you will be supported during the whole project phase by our competent team. Ruhfus Systemhydraulik GmbH can supply hydraulic units with tank sizes of up to 10,000 litres capacity. For this we use DIN oil tanks but also special tanks that are individually adapted to your needs. Here it is immaterial whether the oil tank is made of steel, stainless steel or aluminium. For special designs such as table valves, tank support frames, supporting structures for motor pump units and many more special components connected with your hydraulic unit we are of course likewise the right people to contact. For each of our hydraulic units, 3D models are generated beforehand which can be made available to you. From these you can plan earlier the field piping, possible foundations or building and also transport or other matters in detail. For the drives of our hydraulic units we use standard electric motors with a power of up to 80 kW. On request the motors can also be equipped with a frequency converter. As the valve technology, as well as the oil supply unit, are always subject to customer-specific requirements, limits are always hard to define here. As far as possible only two limits should not be exceeded, on the one hand a maximum volume flow of 275 l/min and on the other a maximum system pressure of 315 bar. Furthermore we can offer you the supply of a complete system of cylinder and hydraulic unit to electric control. If you a seeking a competent partner in the “complete solution” area, we will be glad to support you with our team. 3 D Models