Hydraulic connection - Import export

FGS cast iron body Express seal accessory supplied Blue epoxy anti-corrosion coating Complies with standard EN 545

Hydraulic Shears and Spreaders for connection with an hydraulic pump

P-60-CK - hydraulic crimping head, 60 kN, CU300mm² for exchangeable dies series "60-CK", "22" for connecting with an hydraulic pump working pressure: 700 bar (10.000 PSI) Characteristics Single acting hydraulic head for connecting at a hydraulic pump Quick coupler system CEJN series 115 with dust protection cap for changeable compression dies NEW! The P-131 series with mechanical stop. Mo demage by using without dies!

P-131-C26 - hydraulic crimping head, 130 kN, CU300mm² for exchangeable dies series "130-C", "13" for connecting with an hydraulic pump working pressure: 700 bar (10.000 PSI) opening jaw: 26 mm Characteristics Single acting hydraulic head for connecting at a hydraulic pump Quick coupler system CEJN series 115 with dust protection cap for changeable compression dies NEW! The P-131 series with mechanical stop. Mo demage by using without dies!

The MBS standard cylinder series is characterized by a variable and stroke-independent welded construction. Due to the uniform force transitions between the different sizes and the different connection situations, they are often used in the areas of mobile and stationary hydraulics. Cylinder connection is via welded rod ends and bolted radial bearings. Connections with threaded holes for pipe fittings according to BSPP ISO 1179-2 are planned. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the data sheet for detailed information:

The MBS hydraulic cylinder MZR-1008 is designed as a discharge cylinder of direct support systems on mobile devices, such as Cranes have been constructed. The integrated position measuring system enables the exact position of the support cylinder to be detected. This is hydraulically fixed in connection with the piped double check valve. The cylinder connection is via plain bearing bushes. There are connecting bores for pipe fittings according to BSPP ISO1179-2 in the valve block. Hub and piston rod overhang are variably selectable. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the data sheet for...

Brochure High Pressure Washer Metropolis Hydraulic driven high pressure washer for connecting at an hydraulic circuit. water pressure max. 210 bar For cleaning in areas without infra structure ( no electric ) Water pump with three ceramic pistons Hydraulic engine group 2 (6ccm) Adjustable water pressure Perfect for built-in solutions at concrete transport trucks, tractors, street-cleaning trucks or concrete pumps Low noise - low maintenance - low vibrations For cleaning machines at the construction Suction lift max. 5 meters Water connection: 3/8“ Max. water temperature: 50°C optional for chemicals and pesticides Water-Bypass-system Optioanal: Elektric ON/OFF true integrated 12 Volt solenoid valve. This version has an Oil-Bypass. Type Water Output Spin Power Oil Input Weight WHY-1520 15 L/min. @ 210 bar 1750 rpm 5,5 kW 15-40 L/min. @ 210 bar 8-9 kg THY-2715 27 L/min. @ 150 bar 1750 rpm 5,5 kW 15-40 L/min. @ 210 bar 10-11 kg The METROPOLIS unit is a professional...

Thermal insulation concrete is used for insulation of thermal plants, and can also be a replacement for thermal insulation bricks. The hydraulic connection ensures a stable lining. It comes in extra strong plastic bags, on a pallet, wrapped in shrink wrap

The valve closes totally the pipe line when back flow occurs. The valve is complete with an hydraulic control circuit able to regulate operation’s speed during closing, preventing surge. TYPICAL APPLICATIONS Pump protection; prevention of line emptying; balance in inter-connected hydraulic lines.

The MZD 60/6, MZD 60/6 D, MZD 60/6 W and MZD 60/6 D-W portable clinching pliers are hand-guided machines. These ECKOLD pliers come with a large throat and a high press force, which makes them the ideal tool for all clinching options. They can be customised with exchangeable tool holders for a wide range of applications. The clinching pliers have been specially designed for mobile use and come with a single-acting hydraulic cylinder producing a press force of max. 60 kN or 80 kN. The pliers are connected to the hydraulic unit with a 6 m hydraulic hose and a hydraulic drive unit. The various pliers are customised for specific applications. Contact us for specialist advice about our tool options for your joining tasks. Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task. Contact us for a customised offer, tools included!

Dixon Group Europe offers a comprehensive range of hydraulic & pneumatic quick connect/disconnect fittings for your plant maintenance and fluid handling requirements. A wide selection of materials & sizes available

SRT SPRING RETURN BOLT TENSIONER The Spring Return design dramatically increases productivity and safety on the job site when compared to older technology manual return tensioners. Piston overstroke prevention Piston stroke indication Compatible with MRT Tensioner range Unique quick release bridge adaptation Piston/cylinder misalignment compensation Bolt coverage from 3/4" to 4" (20 - 115 mm) with just 8 tools Designed to fit BS1560/ANSI B16.5/API flanges Fully enclosed load cell design eliminates entry of debris into piston retraction mechanism Piston over-stroke eliminator to prevent over stroking and blowing a seal Twin hydraulic couplings for multiple tool connections Requires stud to protrude above nut by 1 x bolt diameter Application specific tooling available. Contact factory for details. 10 mm piston stroke Max tool pressure: 21,750 psi (1,500 bar) Bolt protrusion above nut: 1 x bolt diameter (minimum)

Flange Body Ball Valves with Butt Weld Ends BBVF2A ▪ Two-way high-pressure round body ball valves designed for use as on/off devices for hydraulic applications ▪ With flange connection according to STAUFF standard and butt weld ends ▪ Pressure range: up to 345 bar / 5000 PSI (depending on size and material combination of the ball valve)

Description The multi-coupling has been created for connecting and disconnecting several hydraulic lines at the same time. This is done by an operating lever the guide crank of which is designed for a minimum of operating force. The connection of the hydraulic lines is done with flat face couplings. Due to the secial sealing it is possible to couple against trapped pressure on the male halves (max. 4x100 bar/ 5802 PSI) The main features of the multi coupling are: · Safety against commutability of hydraulic lines · Quick connecting · Coupling against trapped pressure · Optimally minimized leakage during coupling process Working Pressure 250 bar / 25 MPa / 3626 PSI Material Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE, PU

Elegant and mobile The lifting castor HR combines the benefits of a castor and a levelling foot. Through the simple rotary motion of the hand crank the hydraulic oil is pressed out of the pump and flows through the hydraulic tubing into the connected lefelling foot. Mobile work and transport equipment can be fitted with the lifting castors and be converted into stable working surfaces. Up to 10 lifting castors can be driven by one hydraulic pump. The standard system consists of 4 lifting castors. Order lifting castors online

7000 Kg Capacity Single Axle Monocoque Trailer The trailer is manufactured as a single axle, two-tyre sheet metal body. It is back tipping trailer. The trailer has a heavy load carrying capacity and is suitable for use in difficult terrain conditions. The feature that distinguishes the AOT 402 H trailer from other two-wheeled trailers is that it is long, Monocoque, and the tailgate system is opened by hydraulic lift. The trailer is connected to the tractor from behind and pulled with the appropriate speed limit. All the materials we use in the trailer are certified and comply with the desired quality requirements. Trailer axles are closed hub system and do not require lubrication for many years.

There are hydraulic pressing clamps in the fixture equipment of system. The workpiece is both made spot welding by means of clamps and prevented distortion due to heat during welding. Separate control lever is used as to be put to rear of piston for each piston.Also there is a pressure relief valve on each control lever. Thanks to pressure relief valves the critical pressure is brought to the desired pressure and the compression of the material in desired strength may be achieved A lock valve is connected to each hydraulic cylinder after the tightening process and during the welding operation, the material is prevented from being retracted and opened due to heat input. Reverse deflexion may be done on the frame thanks to the control units in the clamp mechanisms. 1 inert gas arc welding machine will be used for spot welding process.( it will be supplied by the purchaser)

Safety cutting unit consisting of: Hydraulic power unit cube Integrated pressure gauge up to 1000 bar 10m High pressure hydraulic hose (metal free ), firmy connected to the cutting head Superlight cutting head ipr50HS Remote Control 3m Power charger 3m User manual Tool case The total weight of our 95 securty system weights about 17 KG and not 30 KG!

Snaps on to standard hydraulic couplers enabling connection and release from difficult to access grease nipples. 8mm OD x 100mm Straight Tube with 8mm Concave Connector. Part No. 32 405 92

Can be connected even with residual pressure in plug side hydraulic line. This Cupla is best for frequent connection of pressurized hydraulic lines. Super HSP Cupla socket can be connected easily with small power to standard HSP Cupla plug even with residual pressure on the plug side of the hydraulic line. For impact resistance, especially repeated impulses, special quenched steel is used for the body. This ensures original performance over a long period. The design reduces pressure loss, and so particularly suitable for hydraulic applications where enough fluid flow is essential. Both socket and plug have builtin automatic shutoff valves to prevent fluid spill out on disconnection.

Quenched special steel body! Powerful impact resistance, especially against impulses. Valve is designed to suppress pressure loss, particularly suitable for hydraulic applications which need big fluid flow rates. Automatic shutoff valves in both socket and plug prevent fluid spill out on disconnection. Easy to handle. In addition to conventional female thread type, male thread types (male tapered thread, male parallel thread with 30˚ flare, and male parallel thread with 30˚ coneseat) are newly added. Male thread types are designed especially for direct connection to hydraulic power units effectively. Male parallel thread type complies with both metal seal and Oring seal. (In case of Oring seal, Orings available in the market can be used.) Optional HSPDC Cuplas are available for diecasting machine applications with severe pressure variation. The overall length of male thread type is shorter than that of female thread type plus conversion nipple available in the market.

These test stations are designed for pressure testing of valves with an operating pressure of up to 5,500 bar. Gas compressors and pressure reservoir for testing with nitrogen as well as hydraulic stations for connecting and switching valve drives are available. The complete high-pressure valve test station is controlled with a central control panel. Mobile or fixed pressure testing pump can be used to generate pressures of up to 5,500 bar.

Deployment Miniaturized 3/2-way cartridge valve in the 8 mm Spider series.This valve can be used as a pneumatic pilot valve or for direct control for precise metering of gases or liquids. Benefits This very compact valve is suitable for direct mounting in a valve block. All pneumatic or hydraulic connections can be integrated in the valve block.

Siempelkamp has developed the energy-ecient drive system EcoDrive for the ContiRoll® main drives. This system meets tomorrow’s legal and standard demands on the energy eciency of drive systems already today. It comprises frequency converters, motor and gearbox - all well-tuned to one another. In addition to the energy eciency our R&D-work focussed on an improved precision and controllability of the entire drive system. The focus is on high belt speeds, precise r.p.m. for a synchronous operation of the steel belts, torques adjusted to the characteristic load line in connection with the hydraulic pressure/position control, good performance, good uptimes and ease of maintenance. This corresponds to the demand on a very high product quality and an on-demand energy consumption even in partial load operation. This new drive system is able to save more than 10 % of the electrical drive energy compared to traditional Solutions.

The 2/2way externally controlled valves are pneumatically or hydraulically operated valves with two connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 2/2way externally controlled valves are pneumatically or hydraulically operated valves with two connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 3/2way externally controlled valves are pneumatically or hydraulically operated valves with three connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

The 3/2way externally controlled valves are pneumatically or hydraulically operated valves with three connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.

Bulk handling of any kind in sea and inland ports or storage facilities. For ship-to-ship, ship-to-storage/wagon/silo handling. For various types of handling machinery (mobile, stationary, crawler or portal) designed to be connected to hydraulic attachments. Technical design Half-closed or closed grip; with 2 or 4 cylinders Optimisation of machine load capacity thanks to its lightweight design which can hold maximum loads Grab drive: Hydraulic hoses connect the materials handling machine to the grab Closing and opening movements are controlled by the materials handling machine Closing and opening movements controlled by directly connected hydraulic cylinders Grab connection bearing Re-greaseable, robust steel bushing bearing Stable, torsion-resistant shells adapted to material flow: Shell plates made of S355J2+N Cutting edges made of special, highly wear-resistant steel