Alloy ores - Import export

With the unique extrusion process, ALUnna has the capability to produce continuous lengths of extruded profiles. Unlike the conventional extrusion process, the continuous extrusion process does not use billets. Instead, raw material is fed into the process from a coil. This process is especially useful for the production of small extrusion profiles used as spacer bars in alloys EN AW-1050A / 1350A or EN AW-3103/3003. If necessary, there is an option to apply a draw pass to the spacer bar profile using an in-line Schumag continuous drawing machine in order to achieve the final dimension and the most demanding of tolerances.

Weber uses FEM (finite elements method) to design Welding Sonotrodes specifically for a customer or an application. These Welding Sonotrodes are made from high-grade materials like Aluminum alloy, Titanium or sintered steel.

Weber uses FEM (finite elements method) to design Cutting Sonotrodes specifically for a customer or an application. These Cutting Sonotrodes are made from high-grade materials like Aluminum alloy, Titanium or sintered steel. Cutting Sonotrodes for the food industry are manufactured to precisely meet the required hygiene standards.

In our new production space, we have at our disposal 30 state-of-the-art automated punching & bending machines. In addition to bent wire parts, we also produce bent strip parts here. Production to order with complex forming: Bent strip parts are produced from a broad range of materials, including for instance stainless steel, alloyed or carbon steel, brass, copper, bronze, or even K55 or K75, a specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

Zirconium is a silver-grey, shiny heavy metal. In its pure form it is easy to work, corrosion resistant even at high temperatures and has a very low neutron capture cross section. In addition, zirconium offers good stability against structural damage caused by neutron irradiation and against cavitation by coolant flows. The metal is mainly used pure or alloyed with 1.2-1.7% tin, for corrosion resistant pipes, fittings and valves in the chemical industry. This special alloy is called Zircaloy. Zirconium plays an important role in reactor construction. It is used for fuel element claddings and holders, for the pressure vessel lining, and for all structural components that come into contact with neutrons. In the rocket and jet aircraft industry zirconium is used for the manufacture of combustion chambers and feed lines. In electron and X-ray tubes zirconium is used as getter material.

We offer a large number of materials used by the automotive industry. We will be pleased to supply you with raw and painted metals as well as automotive quality glass with or without ceramic coating. Do you wish to customize your test specimens by having a serial number applied to them? Then please contact us directly by phone or mail. All the plastic grades used in the automotive industry are available in the form of injection molded test specimens. Aluminum 6016 (with a thickness of 1.25 mm) Sheet steel grades DC06, DC04_HX420LAD+Z and DP600 Z140 on stock, further grades upon request Galvanized standard quality DX54D+Z100, DX54D+ Z140, DC04ZE50/50, DC04ZE75/75 (with a thickness of 0.8 mm); other grades upon request Higher-strength grades DP600+Z140 and HX420LAD+Z Die-cast aluminum, magnesium and zinc in various alloys Various steel or aluminum grades dimensioned for the impact test in accordance with ISO 11343 Laminated safety glass (LSG) and tempered safety glass (TSG)

SIMPLE OPERATION FOR MANY APPLICATIONS STM-2XM is a two channel rate/thickness monitor that combines high accuracy with flexible programming and easy operation at an affordable price. STM-2XM is equipped with five operation modes to accommodate processes from simple to complex. For example, use simple mode to monitor just one single sensor for the simplest process or use alloy mode for codeposition monitoring. Independent mode allows STM-2XM to function as two completely separate monitors. Two sensor inputs allow for the use of two single or one dual quartz crystal sensor. 10 measurements are taken per second while achieving a resolution of 0.037 Å per measurement (density of 1). FEATURE PACKED STM-2XM has eight programmable digital inputs, eight programmable digital outputs, and four analog outputs allowing for a level of integration usually reserved for more expensive instruments. Programmable features include shutter delay, time/power monitoring, and rate sampling. Use...

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501 NSF H2 registered To achieve optimal adhesion remove soiling as well as other lubricants from the thread and sliding surfaces. Use a brush, spatula or similar to apply sufficient OKS 250

Good formability and conductivity make our products useful for condenser case products produced via drawing processes. Manufacturers of these aluminum case applications rely on Novelis to provide high-quality aluminum coils or sheet in alloys such as 1050 and 3004. Novelis produces pre-painted aluminum for scales, dials and nameplates in laser engraving quality, in the form of a surface-treated coil or sheet. Specialized coatings are applied by rollers. Printing is possible via standard commercial inks and paints with no special materials required.

The linear stages of the PT series are especially designed to provide high accuracy in compact dimensions. The bearing design without runnung-in provides an even higher accuracy than the LT series. The linear stages of the PT series are particularly suitable as vertical axis. normalized aluminium alloy, black or pale anodized cross roller guides, anti-backlash pre-loaded ball screw, anti-backlash pre-loaded

The essential characteristics of this PVD coating are a coefficient of friction of 0,4 and a max. coating hardness of 3.000 HV. The low thermal conductivity effects a very good thermal insulation that increases the possible cutting speed. Besides that the TiAlN coating reduces the need of cooling lubricant. Typical applications are high-alloyed steel or cast iron.

The essential characteristics of this PVD coating are a coefficient of friction of 0,3 and a max. coating hardness of 3.700 HV. The Red Fire coating is a further development that allows cutting hardened and tempered steel or high-alloyed steel.

Impregnation systems to close micropores in metal castings as well as in copper, aluminium or magnesium alloy castings. The parts to be impregnated are fixed in baskets. The latter are transported by a special crane system as well as with reservoir roller conveyors. Excess material is removed by centrifuging of the baskets. The impregnating agent remaining in the pores in fluid form is hardened by heating in a hot water bath. The process sequence runs fully automatically under a microprocessor control.

EXCOR PERIGOL VCI 230 is used to provide corrosion protection for ferrous metals, steel, cast iron, copper and aluminium alloys as well as fully or partially galvanised steel. Solvent-free PERIGOL VCI 230 contains vaporising corrosion inhibitors and may be applied via immersion, spraying or brushing. This product has been specially developed for the protection of metallic cavities. Thanks to the VCI it contains, coating the floor of a case suffices to protect the inner walls from corrosion. PERIGOL VCI 230 is compatible with a wide variety of engine and gear oils, meaning as a rule it does not have to be removed after shipment. In direct contact with metal surfaces PERIGOL VCI 230 forms an oily, non-wipeproof film on the metal surfaces which may be removed using aqueous alkaline media.

Contured fabric tapes, braided into a tube and then flat-rolled. Made from Cu-ETP1 and Cu-OF1, LEONI Histral® alloys upon request, in bare, tin-plated, nickel-plated or silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.40 mm. Cross-section ranging from 25 mm² to 120 mm². Our flat-rolled fabric tapes are characterised by straight rectangular edges with a very high degree of dimensional accuracy and very close tolerances. There is an adjustable degree of compaction, with cross-section remaining unchanged, as well as an easy combination of different cross-sections laid on top of each other (modular system). Contured, braided copper tapes have an improved weldability in automated production processes for manufacturing of earthing straps, connectors or electrotechnical components.

With the ring rolling mill Siempelkamp completes its range of products for the manufacture of rings. From forging the pre-forms to manufacturing the ring blanks to ring rolling, we supply everything from a single source. Siempelkamp’s ring rolling mill manufactures seamless rings made of steel and special materials such as nickel-base, titanium, or aluminium alloys using maximum radial and axial pressing forces. The radial pressing force is hydraulically generated and applied to the part via a mandrel roll. Radial rolling is carried out by reducing the roll gap between the driven external roller and the mandrel roll. The axial pressing force is also hydraulically generated and applied to the part via the upper axial roller. Axial rolling is carried out by means of the vertical forward feed of the upper axial roller. A centring device provides for the correct position of the ring during the rolling process.

Email : trasmme@gmail.com SKYPE : TRAS MM ============================== LEAD INGOTS Often lead ingots are purchased by enthusiasts who wish to cast their own items, such as lead bullets and lead fishing sinkers and other lead ballast applications. Care should be taken when casting with lead. Melting lead and casting lead objects can expose you and others in the area to lead, which is known to be a health hazard. Protect yourself by using all available safety equipment. The fumes coming off the melting lead can be a significant health issue; therefore you should never melt lead without strong ventilation. Lead ingots can be manufactured to required purity levels or as alloys of Antimony and Tin with defined properties. This can be specified so that the lead ingots meet the application requirements.

VSG systems offer a poven and economic solution for the inductive melting of metals or alloys under vacuum or protective gas atmosphere and subsequent casting. Applications: The VSG furnaces can be universally employed for melting and casting under high vacuum or different gas atmospheres in the laboratory or production, e.g. alloying, degassing, purification melting, re-melting processing of noble metals highly pure, highly alloyed steel. • Processing of: ◦noble metals ◦ processing of highly pure, highly alloyed steel ◦ High temperature resistant materials on Fe- Ni- Co- basis ◦ Solar-silicon and other special material ◦ Special- / super alloys

Black Powder Coated Zinc Alloy or PA6 Housing and Handle,90 degree handle rotation combines with rod latch to open or close,Easy Installation,ROHS compliance

Black Powder Coated or Anodizing Aluminum Alloy Handle,different Lengths available,with L=100mm handle,can bear a maximum static load 2500N.Easy Installation,ROHS compliance.

Black Powder Coated Zinc Alloy Housing and Handle,with or without button,Quick Open,Easy Installation,ROHS compliance

The radiometric gauges from Vollmer operate contact-free and measure from a safe distance. They are characterised by their extremely narrow design: With some systems the C-frame is only 120 mm wide. The X-ray systems from Vollmer have digital detectors which give them extremely low noise values. Vollmer supplies the systems with high-quality ceramic tubes and the necessary cooler. The isotope systems also have digital detectors. A particular feature of the Vollmer systems is that the radiation source is located in a special tungsten drawer that can be easily removed from the gauge. Alloy compensation is made either in the classic manner using calibration plates or alternatively at the computer according to the customer's chemical alloy analysis or simply with a small contact thickness gauge that measures the absolute thickness at the start of the pass and transmits this value to the radiometric thickness gauge.

Aluminium is environment-friendly, energy saving and available in virtually unlimited quantities – provided that it is handled, processed and recycled appropriately. The finer and more flawless the structures of aluminium products, the better their performance properties. Aluminium master alloys assure the necessary grain refining and modifying, thus guaranteeing effective control of metallurgical structures. The development of such high quality master alloys is inseparably linked with the name Technologica. We offer all common TiB grain refiners in rod on coil or cut rod. For the manufacture of Al alloys we can offer a wide selection of master alloys either as waffle plate or alloying tablets. Please ask us for a detailled offer. Additionally our warehouse service for grain refining and modification master alloys assures prompt deliveries. Since years we have maintained an ex stock service for small and medium size foundries. We constantly keep in stock TiB 5:1, Tibloy, AlSr10, PCu, ALCUP Phosporus rod and ALCUP 90 cutrod. We can deliver these products promptly. Please test our service. We would like to convince you with our service - as we have done with many others in the past.

Deep-drawn tubes from stainless steels (with a closed side or open) Deep-drawn tubes from non-ferrous metals as bronze, brass,... Seamless sleeves made with stamping processes Ultra thin-walled tubing in Beryllium copper or other special alloys Annealing services in vacuum furnaces Washing technologies for soap and oil The precision tubing is needed at Mera Bellows to manufacture seamless metal bellows.

Stainless steel bellows, formed from seam-welded thin wall tubing Stainless steel bellows, formed from deep-drawn seamless tubing Bronze and Brass bellows for measuring and controlling applications Hydroformed bellows from exotic alloys as Beryllium copper or Monel400 Customized designs and end forms, also off-the-shelf standard solutions Special coatings on demand