Dosing system - Import export

ViscoTec Dispenser 3VMP22 as a volumetric dosing pump for larger volumes ensures an even and reliable product supply of viscous, structure-sensitive and solids-laden products - with a repeatability of +/- 1 %! Absolutely precise, uniform and reliable dosing of various media and handling of larger volumes. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - drive with servo or three-phase motor - easy programming of quantity and speed - low maintenance, quick disassembly - free inlet possible, as self-priming mode of operation

ViscoTec Dispenser 3VMP18 as a volumetric dosing pump for larger volumes ensures an even and reliable product supply of viscous, structure-sensitive and solids-laden products - with a repeatability of +/- 1 %! Absolutely precise, uniform and reliable dosing of various media and handling of larger volumes. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - drive with servo or three-phase motor - easy programming of quantity and speed - low maintenance, quick disassembly - free inlet possible, as self-priming operation

Dosing systems DOS: Perfectly controlled oil feed rates Thanks to automated control of the oil feed rate DOS series dosing systems offer the highest levels of efficiency and flexibility in your lubrication processes – and it does not matter if continuous lubrication is desired or just a single drop is required. The machine cycle time determines the interval at which the lubrication valves open. The following DOS dosing systems are available from us: DOS 10 MR, DOS 10 MR H: system for pneumatically operated roller lubricators WF 60 WG, WF 110 WG, WF 110 MOT. Optionally available with poppet valve DOS 40: reservoir and control unit are separate. Also available for squeeze-on lubricators, but without pressure vessel (replacement: VB 10). DOS S: version for sector lubrication; in this case the oil feed for each roller can be programmed separately (via PLC). Other configurations include, amongst others, an extension to facilitate oil supply directly from an oil drum or an option to operate

Dosing system DB 10: lubrication made easy The dosing system DB 10 uses a pressure vessel with a capacity of 10 litres. This is equipped with a filler ball valve and plastic funnel, a pressure regulator with bleed screw and a safety pressure relief valve. A float switch is fitted to regulate the fill level. There are two dosing valves on the underside. This dosing system is available in the following versions: DB 10 H – with poppet valve DB 40 – with 40 litre reservoir DB 40 H – with 40 litre reservoir and poppet valve

Dosing system VB 10: the sound entry-level solution The VB 10 dosing system operates without any pressure. It hangs above the roller lubricator; the oil is supplied to the machine purely through the force of gravity. The capacity of the VB 10 storage container is 10 litres.

The ViscoMT-XS hobbock emptying system offers a modern way of emptying containers.The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from approx. 5 l to 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers - direct dosing as pulsation-free flow rate

2-component dosing solution with optimum installation space design cascadable multiple dosing system with small dosing head distances minimum space requirement in automation systems. The ViscoDuo-P 4/4 2-component dispenser is a valveless, static, space-saving mixing head with dispensers arranged directly in front of the mixer. The EC version dispensers have been specially designed for easy cleaning (Easy-Clean) and checking of the pump interior. No valves are required in the mixing head. The components to be mixed are metered into the static mixing tube purely volumetrically via the dispenser without dead space. Your advantages: - Processing of viscous materials, unfilled as well as very highly filled supply of the medium with only low inlet pressure - Setting the desired mixing ratio by adjusting the speed ratio of the two dispensers - sensors integrated without dead space in each component for online process monitoring - Withdrawal possible

The compact 3RD4-EC dispenser from ViscoTec ensures an even and reliable product supply of viscous, structure-sensitive and solids-laden products. Absolutely precise, uniform and reliable dosing of various media, such as adhesive dosing or sealant dosing, thanks to the special rotor-stator geometry. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - interior non-stick coated - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - long service life due to media-specific component selection - easy cleaning and condition check of the pump interior - quick disassembly

Dosing systems The right amount every time Compact & efficient Our supply and dosing systems are designed to harmonize perfectly with all Eckardt lubricators. These range from small integrated dosing devices through to standalone oil supply solutions with filter units and tank heaters. Features & benefits • Individual dosing and storing solutions • Integrated tank heater and filter units optional • Suitable for oils of all manufacturers and viscosities • Available in all sizes and performance data Design versions and details Dosing system VB 10: the sound entry-level solution The VB 10 dosing system operates without any pressure. It hangs above the roller lubricator; the oil is supplied to the machine purely through the force of gravity. The capacity of the VB 10 storage container is 10 litres. Dosing system DB 10: lubrication made easy The dosing system DB 10 uses a pressure vessel with a capacity of 10 litres. This is equipped with a filler ball valve and plastic funnel, a p

ViscoTec Dispenser 3VMP36 is a volumetric dosing pump of larger volumes for an even and reliable product supply of viscous, structure-sensitive and solids-laden products - with a repeatability of +/- 1 %! Absolutely precise, uniform and reliable dosing of various media and handling of larger volumes. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - Drive with spur gear motor and optional forced cooling fan - easy programming of quantity and speed - low maintenance, quick disassembly - free inlet possible, as self-priming operation

The Lutz-Jesco dry material feeders are precise and reliable devices for volumetric conveying of pourable substances. These devices consist of self-supporting welded constructions made of high-quality stainless steel sheet, which ensures their robustness and durability. Available in various conveying capacities, the dry material feeders offer flexible adaptation to different requirements and areas of application. They are equipped with hollow screws (screw spindles), which ensure even and continuous material transport. Thanks to this technology, they can feed a wide range of bulk materials, including fine dust particles, pellets, flakes and short fibres. Lutz-Jesco dry material feeders are ideal for industrial applications where precise dosing is required, such as in the chemical industry, food processing and many other sectors.

Examples of materials for dosing: 1- and 2-component epoxy, UV / light-curing / thermosetting adhesives, highly filled materials, anaerobic adhesives, shear-sensitive adhesives, heat-conducting paste, sealants, flavourings, silver conductive paste, flux, perfume, isopropanol, industrial oils, silicone, alcohol, grease, paint and ink, MEK, braze paste, PU, acetone, petrol and many others. The preeflow® eco-DUO is a rotating, absolutely pressure-tight displacement system consisting of a self-sealing rotor and stator. The controlled rotary movement of the rotor generates the flow by displacing the medium in the stator. Pumping without changing the medium is guaranteed. As the material can also be conveyed backwards, preeflow® guarantees a clean, controlled material or medium tear-off without dripping. Application: - point dosing, with highest volumetric accuracy - bead application with application speed adjustable to the web speed - Potting technology

The eco-PEN330 precision volume dispenser made by ViscoTec enables many applications in the low to high viscosity dispensing range. The preeflow® eco-PEN is a rotating, absolutely pressure-tight displacement system consisting of a self-sealing rotor and stator. The controlled rotary movement of the rotor generates the flow by displacing the medium in the stator. Pumping without changing the medium is guaranteed. As the material can also be conveyed backwards, preeflow® guarantees a clean, controlled material or medium tear-off without dripping. - True volumetric dosing - Retreat effect - Viscosity-independent dosing - Easy cleaning - dosing independent of inlet pressure - Adjustable dosing flow - Pressure-tight without valve - Dosing pressures from 16 to 20 bar

▪ Automated emptying system for containers up to approx. 30 liters ▪ Volumetric conveying progressive cavity pump based on the endless piston principle ▪ Pulsation-free and precise emptying and material supply to 1C and 2C dispensing systems ▪ In redundant dosing systems applicable ▪ For medium to high viscosity materials ▪ For structure sensitive, filled, abrasive materials ▪ Application for cylindrical or slightly conical metal and plastic containers ▪ Housing for machine safety and protection against dirt contamination ▪ Automatic retraction and venting the container as well as detection of media surface ▪ 4“-Touch panel with function keys for comfortable setting and parametrization of the system ▪ Externally controllable via Profinet interface ▪ Continuous determination of the position of the follower plate and level monitoring ▪ Adjustable pressure reduction for longer pauses

In order to avoid chemical reactions such as curing or crystallization during the dosing process, any contact with metal in the area in contact with the material in the dispenser was avoided. The materials used have been carefully selected: On the one hand with regard to chemical resistance to adhesives and other fluids and on the other hand with regard to highest resistance to physical wear by abrasive media. Highly reactive materials such as sulfuric acid, anaerobic UV curing acrylates and electrolytes require special treatment. They can be dosed with highest accuracy and best repeatability. The new metal-free dispenser can be easily installed on existing ViscoTec drive technologies and offers the same advantages as other proven dispensers from the portfolio of the dosing technology specialist. The metal-free dispenser is available in many sizes.

lacquer supplis for the internal coating of tubes an aerosol cans

paint supply units for rolling and spray lacquer in the external decoration

Dosing systems for all common lubricants. With the Jerko concentration calculator you get always the right mixture no matter what density the medium has. The dosing systems are available as stand alone solutions or as an optimal addition to our systems or existing spraying system.

SPECTROPLUS is a gravimetric & volumetric synchronous dosing & mixing unit for diverse materials – from granules, regrind or powders to liquids and flakes. Due to the modular design of the SPECTROPLUS with only one frame size and up to 8 dosing module positions, it is one of the most flexible overall systems in the motan product world. In addition to the gravimetric and volumetric version, the SPECTROPLUS can also be combined (gravimetric and volumetric dosing modules in combination). This makes it ideal for individual applications and also complex end products. motan's SPECTROFLEX units can easily be added to the SPECTROPLUS.

The ViscoDuo-VM 2-component dispenser is a valveless dosing system for static mixing based on the proven progressive cavity technology and thanks to its purely volumetric precise dosing principle, is ideally suited for high-precision dosing tasks. Built according to modular structure, a configuration of the 2-component dosing systems as well as maintenance and part exchange at module level is possible. The material components are mixed downstream of the mixing head only in the mixing tube to prevent material hardening in the system components of the mixing head. Your advantages: - repeatable dosing volume even with viscosity and density fluctuations - Processing of low to high viscosity materials with low to very high filler content - Dispenser and mixing head segments can be combined in size due to modularity - standard equipment with dead space-free integrated dosing pressure sensors for online process monitoring - simple assembly/disassembly of the components

Application: Point dosing with highest volumetric accuracy - bead application with application speed adjustable to the web speed - encapsulation technology Areas of responsibility: - Electronic components - Semiconductor production - LCD/LED/OLED - Photovoltaics - Medical technology - Biochemistry - Laboratory - Optics and Photonics - SMD/SMT Technical Data: - True volumetric dosing - Retraction effect - Viscosity independent dosing - Easy cleaning - Inlet pressure independent dosing - Adjustable dosing flow - Pressure tight without valve - Dosing pressures up to 40 bar

The preeflow flowplus16 is a material-resistant, dead space-free miniature pressure sensor in the smallest design - for moving fluids. The "Luer-Lock" (male/female) on both sides makes it suitable for all common dosing systems that work with this type of thread. The sensor generates a standardized, compatible, linearized and temperature-compensated output signal. Existing dosing systems can be easily extended and protected with the pressure sensor. The flowscreen is a robust evaluation device for applications in various fields of application. In combination with the pressure sensor flowplus16, a complete system for fluid process monitoring is created. Thanks to standardized signals and standardized connections, the components can also be integrated as individual components. Your advantages: - Inline sensor - A pure flow sensor - Maintenance-free - Supply/voltage supply 24 V +- 10% - Mechanical Luerlock connection to DIN EN 1707

Compression load cell from 500 kg to 520 t. They provide absolute precision for container cars and dosing systems. Made of stainless steel, they are highly resistant and also insensitive to vibrations. Proven rocker pin principle for best compensation of expansion and shear forces Load cell capacity range from 500 kg to 520 t Accuracy class: 0.25 % - 0.008 % Corresponding mounting kits (certified according to EN 1090)

Our ecoPEN  XS is a true volumetric dispensing system that applies the smallest amounts of singlecomponent fluids – for highprecision dispensing technology. Thanks to the proven endless piston principle, watery to pasty liquids are perfectly dispensed. A clean, processreliable dosage is achieved regardless of fluctuations in viscosity. - Dimensions (without cartridge and holder): length 178 mm, width 22 mm, depth 65 mm - Weight (without cartridge and holder): 175 g - Operating pressure: 0 - 6 bar - Max. dispensing pressure: 20 bar - Self-sealing: Approx. 2 bar - Viscosity: watery to pasty - Volume flow: 0.0044 - 0.35 ml/min - Min. dispensing quantity: 0.25 µl - Dosing accuracy: ± 1% - Stator material: vidur-C1 - Material inlet: Luer-Lock adapter for cartridge (cartridge can be rotated 360°) / Adapter for hose connection (Ø - 3mm) - Material outlet: Luer-Lock (patented) - Wetted parts: POM / vidur-C1 / stainless steel / HD-PE - Repeatability: > 99 %

The dispenser based on the ViscoTec endless piston principle is particularly suitable for the filling, dosing or application of viscous, abrasive, highly filled or shear-sensitive materials. There are three different versions of the volumetric dosing system: 3VHD8, 3VHD12 and 2VHD12. Important key data: - Withdrawal option (no dripping or thread pulling) - absolutely linear relationship between rotor speed and spread rate - long service life due to media-specific component selection - quick and easy disassembly/assembly - Sealless, easily dismountable rotor string - process-safe and high-precision filling/dosing - variable quantities infinitely adjustable - compact construction Hygienic features: - Design according to EHEDG guidelines - FDA-compliant design/development - hygienic and pharmaceutical design - Interior with optimised dead space - all surfaces Ra ≤ 0.8 μm - rinsing connection for automatic cleaning

Specially designed for tank and hopper weighing, hybrid scales and high-precision dosing systems. For use in EX zones 1, 2, 20, 21, 22 and FM DIV 1. Ultra-high precision load cell for batching applications Load cell capacity range from 100 kg to 3 t Accuracy class: D1 (0.04 %), C3 (0.015 %), C6 (0.008 %) Corresponding mounting kit: PR 6046

The ViscoTec Hygienic Dispenser is available in 3 different sizes, allowing for volumes of 0.35ml up to 5.1ml per revolution. The smallest of dosage volumes can be perfectly dosed with a deviation of only +/- 1%. In addition to FDA-compliant components, and an EHEDG-compliant hygienic design, is the possibility of automatic cleaning via additional connection outlets. The cleaning medium is applied via the outlet in order to carry out automatic rinsing. Alternatively, the new dispensers can be disassembled quickly and cleaned manually. As in all dosing systems from ViscoTec, the VHD uses the proven endless piston technology based on the use of eccentric screw technology. For the VHD, many characteristics have been optimized and specially enhanced for use in the food and cosmetics branch. Among other things, the interior of the dispenser has been analysed and redesigned: the goal being to avoid dead volume and thus prevent contamination through harmful micro-organisms.

Compression load cells from 100 kg to 5 t. Specially designed for tank and hopper weighing as well as basic dosing systems. For use in EX zones 1, 2, 20, 21, 22 and FM DIV 1. Ultra-high precision load cell for batching applications Load cell capacity range from 100 kg to 5 t Accuracy class: 0.04 % - 0.008 % Corresponding mounting kits

The ViscoTec dosing and filling pump RD-Hygiene for food and cosmetics is a volumetric pump based on the continuous piston principle. It is ideally suited for discontinuous or continuous pulsation-free dosing of viscous, structure-sensitive and solids-laden media. Thanks to the high-quality ViscoTec dispensers, high-precision dosing applications can be realized in the food and cosmetics sector. The systems are used e.g. in the bakery and confectionery sector for decoration. Typical doses are icing or fondant, but also fillings such as vanilla or chocolate cream. Your advantages: - Specially adapted filling tubes for a wide variety of filling applications - Application and dosing in automated systems - Low to high viscosity as well as abrasive, shear-sensitive or lumpy media - hot and cold filling - Optimum results for CIP/SIP (Cleaning in Place/Sterilisation in Place) cleaning