Construction vehicles - Import export

Based on multiple years of solid experience in rail vehicle construction and now also in ship construction, we offer comprehensive, engineering planning services for a variety of interior assemblies, taking into consideration various materials such as: Plastics, e.g. thermoformable materials Glass and carbon fiber reinforced plastics Solid wood and wood composite materials Glass, stone, synthetic stone (Corian) Hybrid construction of all materials in combination, as well as with stainless steel, steel, and aluminum. Our competencies in this area are governed by high customer-specific requirements and international standards. We support our customers comprehensively with preparation of the necessary documentation according to their individual requirements in the following areas: FEM verifications Weld documentation and inspection Gluing documentation Risk assessment Project documentation. Out portfolio encompasses: Partition walls

Shaft diameter d1 [mm]: Request iglidur® multi-component bearing Even higher loads The new iglidur® multi-component bearing combines the benefits of a hard polymer shell and a tribooptimized iglidur® core to make a unique bearing: Service lives previously not achieved in with an injection- molded polymer bearing heavy duty pivoting applications even beyond a radial load of 120 MPa show the potential. Lubrication-free wear-resistant Extremely shape stable Corrossion-resistant Application areas: Agricultural engineering, utility and construction vehicles, mechanical engineering Dimensions according to ISO 3547-1 and special dimensions Chamfer depending on d1 d1 [mm]: f[mm]: Ø 1-6 0,3 Ø 1-6 0,5 Ø 1-6 0,8 Ø > 30 1,2 Shaft diameter d1 [mm]:

Other information IF -Design Award for Triflex®-Design Torsional movements possible Other information Installation instructions Joining, separating and filling of the Triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® 332.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 352.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open 333.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 353.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open This modular, rugged joint system is suitable for: Three-axis movements for machines of any type For dirt-filled environments High tensile strength Where rectangular shapes are requested Completely closed - reliable protection against dirt and chips Combination of different bending radii and axes Connection and separation possible at any chain Flanged mounting brackets or brackets, galvanized steel Snap-open Series 352 and 353 Combination of Series 353/333 possible Typical industrial sectors and applications Machine tools Robotics Material handling system Plastics industry Construction machinery Vehicle manufacturing Medical equipment IF -Design Award for Triflex®-Design Torsional movements possible

Other information iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible Other information Installation instructions Join, separate and fill the easy triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® E332.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® E333.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® This modular joint system is especially suited for: Three-axis movements of machines For simple robotic applications Quick installation of cables with "easy" system Simple filling from both sides Where rectangular shapes are required Combination of different bending radii and moving directions Shortening or lengthening possible at "any point" KMA mounting brackets with integrated strain relief Typical industrial sectors and applications Machine tools Robotics Handling equipment Material handling system Plastics industry Construction machinery Vehicle manufacturing General mechanical engineering Medical Equipment Office furniture iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible

Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E4/light New E4/light version with the proved and tested "tongue and groove" system of the Series E4/4 Low weight Optimized interior-exterior dimensions ratio Cost efficient Manifold interior separation potentials Large accessory kits Thin external links Max. travel distance: 150 - 400 m Typical industrial sectors and applications Machine tools (closed E4/light tubes and open E-Chain®) Material processing Stone cutting machines Woodworking machines General mechanical engineering Vehicles Construction machinery Limited application of long travels Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness

Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of chain links Assembly Instructions Application examples Applications in various industrial sectors. E2 mini One-/Two-piece E-Chain® Small pitch for silent operation High torsion resistance Double stop system and large pins for long service life Optimized weight/stability ratio Easy to mount Manifold interior separation Typical industrial sectors and applications Construction machinery Handling systems Installation Packaging machines Textile machines Vehicle construction Wood machines Glass machines Machine construction General mechanical engineering etc. UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request

The PULSAR H is a fully automatic, horizontal-operating rotary laser with an easy-to-use operating concept. If vibrations or shocks occur, the laser automatically interrupts the rotation, preventing measurement errors. The robust aluminum housing and high-quality workmanship make it ideal for tough use.

With the manufacture of compacting containers for use in municipal vehicle construction, decades of expertise and know-how go into the implementation of every product. In accordance with the requirements, we implement the container manufacture and, if the customer requests it, take over both internal coating and external painting. The production range includes volume-optimised 37 – 43 m³ vehicle bodies.

Vehicles and systems that are used under extreme conditions need the right greases to protect important components. Our product range includes a large selection of multi-purpose and special greases from leading manufacturers for outstanding protection even under the highest operating conditions. Whether lubricating bearings in commercial and construction vehicles or using greases according to manufacturer specifications in classic cars – the optimum grease can extend the service life and maintenance intervals of machines, increase productivity in the vehicle fleet and optimize bearing function. We can advise you personally on the right choice of synthetic multi-purpose and special greases for individual applications.

In 2015 the product name was changed. The old product name was Castrol Special Paste AU LN 598. Molub-Alloy Paste AU LN 598 White assembly paste Description Castrol Molub-Alloy Paste AU LN 598 (previous product name Castrol Special Paste AU LN 598) is ideal for all clean assembly work as well as as a base or thin film lubrication suitable. It specifically prevents fretting corrosion . The fitting parts can be easily removed even after years. Application Castrol Molub-Alloy Paste AU LN 598 can be used as a universally applicable assembly paste, for fitting parts in environments at risk of vibration, in mechanical systems with frictional vibrations, on hydraulic cylinders and open lubrication points as well as on sliding points in vehicle and transmission construction.

Depending on type, multi-directional dampers can be loaded in every axis. In our standard vibration dampers of the GDZ series two all-metal cushions are installed. Depending on the assembly, these cushions are load with pressure or tension. Vibration dampers of the series 7 have another cushion obstructed which allows them to absorb load in horizontal direction additionally. Because of this, GDZ dampers are perfectly suitable for applications in the fields of plant engineering and rail vehicle construction. Our product range includes three different types of these multi-directional dampers: GDZ series 1 for a fixation with bolts for pressure and tension load GDZ series 5 for a welding fixation for pressure and tension load GDZ series 7 for a fixation with bolts for pressure, tension and horizontal load

lastic and strong adhesive and sealant on polyurethane (PUR) basis. For bondings and sealings on metals, many plastics, ceramic, wood, glass, stone, etc.. Applications: Tank and apparatus construction, Car body, freight container and vehicle construction, Ventilation and air conditioning, Pipeline and fittings construction, Energy and electrical industry, Insulating technology and in many areas of plastic technology and wherever silicone is not suitable. Properties: Can be painted over and sanded after curing, Odourless curing, Resistant to weathering and UV, Excellent aging resistance, Resistant to fresh water and saltwater, Stable, pasty and Silicone-free. A better adhesion is achieved by using suitable WEICON adhesion agents. With suitable paint coating systems (except alkyd resin paints). Available in white, grey and black.

Top-class low-friction engine oil in Aral synthesis technology for current commercial vehicle diesel engines with the suitability for long oil change intervals. Meets the high requirements of commercial vehicle manufacturers as well as the strict European test requirements. Application Suitable for applications in Euro 6, Euro 5, Euro 4, Euro 3 and Euro 2 engines in commercial vehicles, construction and agricultural machinery that do not require "Low SAPS engine oil" and that require the specifications mentioned. Please follow the manufacturer's instructions in the maintenance manual. Specifications ACEA E4, E7 API CI-4 JASO DH-1 MB approval 228.5 MAN M 3277 Volvo VDS-3 RVI RLD-2 Cummins CES 20077, CES 20078 MTU oil category 3 Mack EO-N DDC Power Guard 93K215

Top-class low-friction engine oil in Aral synthesis technology for current commercial vehicle diesel engines with the suitability for long oil change intervals. Meets the high requirements of commercial vehicle manufacturers as well as the strict European test requirements. Application Suitable for applications in Euro 6, Euro 5, Euro 4, Euro 3 and Euro 2 engines in commercial vehicles, construction and agricultural machinery that do not require "Low SAPS engine oil" and that require the specifications mentioned. Please observe the manufacturer's instructions in the maintenance manual. Specifications ACEA E4, E7 API CI-4 JASO DH-1 MB approval 228.5 MAN M 3277 Volvo VDS-3 RVI RLD-2 Cummins CES 20077, CES 20078 MTU oil category 3 Mack EO-N DDC Power Guard 93K215 Deutz DQC III-10

Top-class low-friction engine oil in Aral synthesis technology for current commercial vehicle diesel engines with the suitability for long oil change intervals. Meets the high requirements of commercial vehicle manufacturers as well as the strict European test requirements. Application Suitable for applications in Euro 6, Euro 5, Euro 4, Euro 3 and Euro 2 engines in commercial vehicles, construction and agricultural machinery that do not require "Low SAPS engine oil" and that require the specifications mentioned. Please observe the manufacturer's instructions in the maintenance manual. Specifications ACEA E4, E7 API CI-4 JASO DH-1 MB approval 228.5 MAN M 3277 Volvo VDS-3 RVI RLD-2 Cummins CES 20077, CES 20078 MTU oil category 3 Mack EO-N DDC Power Guard 93K215 Deutz DQC III-10

Wherever temperatures are measured, temperatures must also be simulated. The Pt100-simulator is suitable for a wide area of applications. It has a wide range of simulation, which is resolved in 0.1 °C steps and makes many assignments in chemistry-, measuring-, controlling-, medicine and household applications, food industry, vehicle construction, air- and space travel and power plants easy to solve. Often in the past several simulators had to be used alongside to achieve either resolution or the range of the relevant application. As an extra advantage to the user temperatures can be entered in degrees celsius. Additional extensive conversions and readings in tabulation sheets are no longer necessary. Features: — Simulation range -100 °C up to +500 °C — Resolution 0.1 °C — Calibration in accordance to DIN EN 60751 — Simulation of line resistance 10 Ω, 20 Ω or 30 Ω — Sturdy aluminium-housing

For many years, we have been your expert and high-performance supplier for companies in the automotive and commercial vehicle sector, for construction and agriculture, in the wind turbine sector and in the industrial sector – from Bavaria for the whole of Germany. Due to regular product training of our employees and a maximum of experience, our consultants are available to you personally on site or by telephone with advice and assistance. Thanks to our high storage capacity of over 1,000 pallet spaces, our tank farm for bulk goods and our high-performance logistics network, we can supply you quickly and reliably throughout Germany. Smoothly to success. With Diermeier.

OKS 621 is a fast-acting rust dissolver for industry, workshop and hobby applications. The solvent contained in OKS 621 cools down the assembled parts/screws rapidly to -40°C. This results in a slight shrinkage of the affected profile. Capillary cracks in the corrosion layer appear, allowing an easier penetration of the creeping oil. High-performance rust remover for fast and nondestructive disassembly of extremely seized-up parts or bolts, e.g. for vehicles, agricultural or construction machinery, vessels and port facilities; also for all machinery in industry and trade Advantages and benefits Contrary to a heat treatment of seized-up bolts OKS 621 does not cause heating damages in the environment No damages through overheating Resin and acid-free Without silicone

The FERO-BULB series are used in large quantities in various industrial appliances for a long ti me. Particularly in the field of vehicle and tank construction, this type of rivet is an excellent choice. FERO-BULB blind rivets feature the following characteristics: — very high shear strength through a captive mandrel — large setting head which folds during the setting process — captive mandrel locks vibration proof inside the rivet — dust proof and splash waterproof — high clamping force onto components

The really powerful tool from HONSEL for blind rivets up to 8.0 mm diameter! With a very long stroke of 25 mm it is also eminently suitable for the setting of high-strength FERO® BOLT blind rivets. The BZ 123A is to be found in industrial series production, for example, of truck semi-trailers, and in individual vehicle and trailer construction – wherever large numbers of safety-relevant blind rivets have to be set quickly and reliably.

Discover high-quality technical plastic injection molded parts for vehicle construction at EWOQE! As an experienced partner to the automotive industry, we offer customized solutions for a wide range of applications, from interior components to technical parts for chassis and powertrain systems. Our dedicated team utilizes state-of-the-art manufacturing technologies and high-quality materials to ensure that our plastic injection molded parts meet the highest quality standards. We understand the demands for durability, resistance, and functionality in vehicle construction and design our products accordingly. Whether you need components for electric vehicles, internal combustion engines, or hybrid vehicles, we are your reliable partner for technical plastic injection molded parts. Rely on our expertise to meet your requirements and achieve your production goals. Contact EWOQE today to learn more about our tailored solutions for vehicle construction and to advance your projects.

Our successful model FERRUM DM430 x4 DLZ is now going into its fifth edition in 2024 and will be compared to most competitor products has not yet been achieved in many useful parameters. Especially in terms of lifting power and maneuverability, the FERRUM DM430 x4 DLZ is a real ace among articulated skid steer loaders worldwide. We have carried out a lot of model updates over the years and countless of these multifunctional construction vehicles are now in use in Germany and throughout Europe . At the beginning of 2024, we are now offering you a branded engine from Kubota or Yanmar for the first customers of YOUR choice at a regular surcharge of €3,599 in the promotional package. The offer is limited. Become part of this success too. FERRUM machines . With our products you will be successful

Our successful model FERRUM DM522 x4 is now entering its sixth edition in 2024 and is still unmatched by most competing products in many useful parameters. We have carried out a lot of model maintenance over the years and so many of these multifunctional construction vehicles are now in use in Germany and throughout Europe. At the beginning of 2024, we are now offering you a branded engine from Kubota or Yanmar for the first customers of YOUR choice at a regular surcharge of €3,599 in the promotional package. The offer is limited. Become part of this success too. FERRUM machines . With our products you will be successful ! The compact muscle man. Countless inquiries from those interested in wheel loaders and yard loaders have led us to create a new model with the FERRUM DM522 x4, based on tried and tested technology.

Our successful model FERRUM DM416 x4 is now entering its seventh year in 2024 Edition and is still not reached in many useful parameters by most competing products. We have carried out a lot of model maintenance over the years and there are now several hundred of these multifunctional construction vehicles in use in Germany and throughout Europe. At the beginning of 2024, we are now offering you a branded engine from Kubota or Yanmar for the first customers of YOUR choice at a regular surcharge of €3,599 in the promotional package. The offer is limited. Become part of this success too. FERRUM machines. With our products you will be successful! Useful for almost all heavy work around the house, yard and garden, whether privately or on your commercial property.

COMMERCIAL VEHICLES, VEHICLE, TIPPER & CONTAINER CONSTRUCTION, MAINTENANCE As an authorized partner of Scania, Meiller, and Palfinger, we're your go-to for all service and maintenance work, as well as the development and construction of special vehicles. With extensive experience in waste disposal and recycling, we're well-equipped to deliver top-notch results using cutting-edge technology. Benefit from our expertise and explore the diverse opportunities. SPECIAL VEHICLE CONSTRUCTION: UNIQUE REQUIREMENTS - CUSTOM SOLUTIONS Our team of highly qualified professionals designs and builds special vehicles tailored to your needs. No challenge is too big for us, thanks to continuous training and vast experience, ensuring precise solutions. Professional execution and state-of-the-art technical equipment are our standards. Contact us today for more information and offers!

The fanless VMT9000 series is a vehicle and logistics terminal that is suitable for indoor and outdoor use, as well as for cool areas. The terminals can be mounted on all logistics, agricultural and construction vehicles. The design of the terminal is particularly robust for these areas of application, but at the same time compact and guarantees reliable operation even under extreme conditions. Thanks to the sunlight readable display, it is easy to read the screen even in direct sunlight. In addition to Windows®, IGEL and Linux, the terminals are now also compatible with Android™. Android offers useful industrial functions, such as kiosk mode.

Whether tractors, excavators or construction machines, the segment IVCM (Industrial Vehicles and Construction Machines) places high demands on the valve connectors used.

For over 30 years, GESCO-metall GmbH has stood for quality, competence and experience in the field of contract bending. The production focuses are curved parts for windows, doors and facades as well as complex special profiles for industrial construction, vehicle manufacturing, plant engineering and medical technology. It goes without saying that we also bend aluminium cover caps for the wood/aluminium field. Our bending technology range is rounded off by complete curved elements, including electrolytic oxidation of aluminium, powder coating, metal fittings and glass together with window sills and soffit cladding. You will find more information about bending technology, contract bending, profile bending, portholes, in our product section: Contract Bending Work, Curved Elements, Window Sills, Portholes, Glazing Frames – Door Windows.

Cold-drawn heavy-duty rails offer exceptionally high load-bearing capacity and stiffness. In our eShop, you can find partial extensions, full extensions, and over-extensions up to 3000 mm in length and with a load capacity of up to 2400 kg. Cold-drawn heavy-duty telescopic extension rails are suitable for extreme loads and stresses. The precision-machined ball tracks ensure accuracy and provide excellent shock and vibration resistance. Therefore, these telescopic rail models are well-suited for demanding tasks in machinery manufacturing, the military sector, special vehicle construction, and heavy-duty shelving. Due to their extreme strength, these telescopic rails are particularly resistant to lateral forces, making them an excellent choice for dynamic and motorized applications, especially at very large lengths. They can also be used at high temperatures since no plastic parts are used.