Results for
RÜHL FEUERLÖSCHMITTEL GMBH
Germany
Polyester resins (UP resins) form the basis of our product range in the glass fibre reinforced plastic systems business area – with a wide variety of applications. They range from thixotrope standard systems for manual lamination and fibre spraying to low-viscosity standard formulations for polymer concrete and sanitary applications to numerous special formulations for specific requirements. With a broad spectrum of properties and applications, our UP resin systems are suitable for products in a wide variety of industries. Typical properties Dense matrix / composite of approximately 1.1 g/cm³ / 1.5–1.7 g/cm³ Fibre content 25-50 % of total weight Moulded part mass per unit area of 4500-8000 g/m² Flexural modulus of elasticity 5000–25,000 MPa (with reinforcing mesh) Bending resistance of 130–260 MPa (with reinforcing mesh) Impact resistance of 45–95 KJ/m² Reinforcing materials: Continuous or cut glass fibre mats, fleece Mesh Non-crimp fabrics Special formulations and versions Styrene-reduced, environmentally friendly formulations Low-viscosity injection resins with reduced exothermic peak Formulations for the pultrusion process Systems with high chemical and hydrolysis resistance DIN 1140 versions with special mechanical values and dimensional stability under heat greater than 100 °C (HDT > 100 °C) Resins with good adhesion for combination with PVC Resin systems with shipping industry approval: Det Norske Veritas/Lloyd’s Register of Shipping/Germanic Lloyd Coordination with gel coat/top coat for surface refinement Flame protection formulations Electrical industry: UL 94 V0 Rail vehicle construction: DIN 5510 (S4, SR2, ST2)
Request for a quoteRÜHL FEUERLÖSCHMITTEL GMBH
Germany
GFK Systems PUR Systems Fire Extinguishing Agents Cleaning + Disinfection Infothek About us Contact Products Polyester Foam Resins Polyester Resins Applications Service Quality Newsletter Contact, Glass Fibre Reinforced Plastics Polyester Foam Resins Compared to conventional matrix systems for fibre-reinforced products, UP foam resins offer material and weight reductions of up to 30 % thanks to their micro-cellular foam structure. In simple sealed moulds, glass fibre reinforced plastic components that are smooth on both sides are produced cost-effectively under a vacuum in comparatively short cycle times. The production of sandwich components resistant to bending, with a foam core, and the direct integration of metal reinforcements and threaded elements – for example for large vehicle components – has also proven itself. Typical properties Dense matrix / composite of approximately 0.6–0.7 g/cm³ / 0.7–1.2 g/cm³ Fibre content 20-50% of total weight Moulded part mass per unit area of 3000–5000 g/m² Flexural modulus of elasticity 3000–8000 MPa Bending resistance of 35–185 MPa Impact resistance of 35–65 KJ/m² (with 20–35% glass content) Reinforcing materials: Continuous glass fibre mats Composite glass fibre and fleece mats Natural fibre mats Special formulations and versions Systems with long processing times for very large components Foam resin formulations with elevated dimensional stability under heat Systems for fibre-reinforced components with a high level of characteristics Coordination with gel coat / top coat for surface refinement Flame protection formulations Electrical industry: UL 94 V0 Rail vehicle construction: DIN 5510 (S4, SR1, ST2)
Request for a quoteRÜHL FEUERLÖSCHMITTEL GMBH
Germany
Compact - purocast® RIM - purorim® Clear Coat - puroclear® When compact end products are the objective of the manufacturing process, PU systems without foaming agents that react under waterless conditions are used. These non-foamed polyurethanes serve a variety of casting and spray applications where excellent surface characteristics are usually important. Typical properties Moulded part density from 1000 kg/m³ Hardness from shore A 10 to shore D 85 Self-parting formulations possible Special formulations and versions FDA and foodstuff approval Anti-static Impact resistant Crystal clear (3D effects, scratch-proof and self-repairing surfaces) UV resistant, lightfast Flame protection formulations Automotive industry: FMVSS 302 Rail vehicle construction: DIN 5510 (S4, SR2, ST2)
Request for a quoteRÜHL FEUERLÖSCHMITTEL GMBH
Germany
PU composites are mainly found in the production of moulded parts resistant to bending. The skilful combination of materials puts the topic of lightweight construction into the spotlight (honeycomb technology applications). Sophisticated surface designs are supported by corresponding PU / UP resin systems. Thanks to the reduced component weight, moulded part applications are used in the automotive sector – and, with corresponding flame protection formulations, also in rail vehicle construction. Typical properties Moulded part density of 450–1100 kg/m³ Fibre proportion from 30 % Available foaming agents: usually water Reinforcing materials Glass fibre rovings Glass fibre mats and non-crimp glass fibre fabrics Carbon fibres Natural fibres (hemp, sisal, coconut etc.) Special formulations and versions Honeycomb materials for sandwich structure components Paper honeycombs Waterproof paper honeycombs (patent-pending process) Plastic honeycombs Aluminium honeycombs Systems with a large processing window Use of polyols based on renewable resources Self-parting with simultaneous good lamination properties Flame protection formulations Automotive: FMVSS 302 Rail vehicle construction: DIN 5510 (S4, SR2, ST2) Aircraft construction: FAR 25853, ABD 0031 Construction industry: DIN 4102 B2
Request for a quoteRÜHL FEUERLÖSCHMITTEL GMBH
Germany
Surfaces with high reproduction accuracy combined with a cellular core to reduce the weight of moulded parts are among the outstanding characteristics of the rigid integral foam product group. In combination with duromer systems, our products in this field feature an extensive range of useful characteristics. Application examples include housing components and covers. Typical properties Moulded part density of 220–900 kg/m³ Shore D hardness of 35–85 Available foaming agents: usually water, but also pentane and hydrofluorocarbons Special formulations and versions Good heat insulation Self-parting formulations possible Good coating and lamination properties Flame protection formulations Electrical industry: UL 94 V0 Construction industry: DIN 4102 B2 Rail vehicle construction: DIN 5510 (S4, SR2, ST2)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
RÜHL FEUERLÖSCHMITTEL GMBH
Germany
Flexible foams are elastic PU foams that are used in many different applications thanks to their usually excellent padding properties. In addition to the seating furniture industry, applications include motor vehicle and rail vehicle seats. However, they can also be used in seals and loaded damping components. Typical properties Moulded part density of 40–250 kg/m³ Adjustable compression load deflection Dimensional stability under heat up to 100°C Water is usually used as the foaming agent, but liquid CO2 is also possible Special formulations and versions Viscoelastic Barium sulphate loaded for acoustic applications, e.g. in aviation FIPFG seals for PU high-pressure processing Dimensional stability under heat up to 150°C in special applications Emission-free pursuant to RAL-ZU 38 Flame protection formulations Automotive: FMVSS 302 Rail vehicle construction: DIN 5510 (S3, SR2, ST2), EU TL 45545 Aircraft construction: ABD 0031, FAR 25.853 Furniture industry: California 117 Section A Part 1
Request for a quoteResults for
Construction vehicles - Import exportNumber of results
7 ProductsCountries
Company type
Category