attachment flange

...Adduction head under the head Useful passage 50 mm Male or female output shaft Suitable for all drilling machines with small internal passage Can be installed on any type of drilling rig Adaptable attachment flange Producer:Project Template:Testina adduzione sotto-testa Condition:New...

... well as holders for scanner and mouse; 360° mounting flange can be attached longitudinally, transversely, or at the end of the aluminum profile (40), for end application, an M8 thread must be present at the core drilling. Material Monitor workstation: Steel / Aluminum / Plastic Cable management cover: Plastic Mounting flange: Aluminum die-cast Screws: Steel Surface/Color: Monitor workstation: gray painted Mounting flange: gray painted Cable management cover: gray Screws: galvanized...

...-phase, direct current, and 24V permanent magnet motors Housing material: Aluminum cast Gear ratios: 7; 10; 20; 24; 30; 50; 55 Permissible torques: 11-13 Nm Hollow shaft: Ø15mm Hollow shaft material: C45 Optional: Double-sided plug shaft: Ø10x30mm gen. 5x20mm Optional: Single-sided plug shaft: Ø10x30mm gen. 4x20mm Shaft materials: C45 Optional: Large flange: Ø100/Ø80/Ø60mm...

...FXE-TP Electro-Permanent Lifting Magnets are ideally suited for beams and profiles due to their special design. The attachment of beams to the profile flange is easily achievable thanks to the specially shaped pole surface. FXE-TP lifting magnets are also available as a truss solution, FXE-TTP, tailored specifically to your application.

... parts (round tubes with diameters of 20 and 25 mm or square tubes 20x20 and 25x25 mm). With swivel flange screen mount with vibration-resistant locking, tilt of 90° in 15° increments. For monitors/control boxes up to 25 kg (static). With universal screw plate. The base mount is suitable for attachment to round tubes with a diameter of 30 mm. Reference:29180 Finish:Black / natural...

...Housing diameter 12.7 millimeters, lifespan: 108 movements, adjustment speed: up to 10m/s DEVICES Measurable displacements between 0… 25 millimeters and 0… 250 millimeters ± maximum 0.05 % F.S. non-linearity. Housing diameter 12.7 millimeters Lifespan: 108 movements Adjustment speed: up to 10m/s Integrated cable 1 m Special versions: Coupling with ball joints or flange attachment upon request Type: linear Contact / non-contact: contact Technology: potentiometer, mechanical Output signal: analog Other features: compact, miniature...

...Universal cable pull sensor with measurement lengths of up to 6000mm, robust construction, and precise, secure cable guidance, prepared for the attachment of various encoders with a 58mm standard flange. Robust design, easy installation, maximum measurement length of 6000 mm, incremental or absolute encoders, also available as a safety version in combination with encoder WV58MR, great flexibility with freely selectable encoders with a 58 mm standard flange, various cable types, featuring PURE.MOBILE technology.

...The main advantages at a glance: • Deflection force can be adjusted continuously via compressed air • The tool is always pushed back to the zero position against the fixed stop after deflection by the pistons pressurized with compressed air. • Hysteresis is zero. An adapter flange for simplified attachment of the system is available upon request. Drive: Lamella motor Additional features: for robots, flange...

... overload through torque limitation * EX protection according to directives 2014/34/EU Type: Elastomer Product application: For pumps and industrial applications Additional features: Clamping attachment, explosion-proof Mounting: Flange, cylinder...

...FS1 - The Classic Plate design, fixed mounting flange with 3 attachment holes, wear protection freely selectable Product Description The moisture measurement probes measure material moisture through direct contact with the medium being measured. The specific installation situation is crucial for accurate, reproducible measurements. The measuring electronics are fully encapsulated in a high...

... attachment parts. Here, the ECKOLD bending machines offer a rational, cost-effective, and space-saving alternative to pressing tools and fully automated bending stations. The ECKOLD sheet bending technology is widely used in prototype and small series production. The delivery includes a hydraulic unit HA 510-F. Required bending inserts are not included in the device's delivery. These must be selected...

... ML 600 mechanical loaders. - All up to 250 lbf·ft capacity can be mounted to Quad Plate for multi-transducer mounting on the ML 250. - Smaller sizes (up to 300 lbf·in capacity) can be mounted to STMB or UMB brackets for use with a bench or table. - Larger sizes can be mounted on UMB L-bracket. - Requires detachable cable (P/N 10293) for attachment to Switch Box or directly to tester. Related Products: - Mechanical Loader ML - DTT System 8...

... particularly suitable for the static testing of impact tools, torque wrenches, electric screwdrivers, etc. of various designs. Together with the ETH evaluation device GMV2, even torque breakaway wrenches can be measured without distortion of the measurement result due to over-torquing. The torque sensor can be mounted with the mounting flange in any position according to the tool being tested. Various adapters are available for tool attachment, allowing the tool to be tested with or without a socket wrench insert. The measuring shaft of the torque sensor is equipped with strain gauges.

...Roof adapters are used for the installation of roof radial fans of all series. The roof adapters without a base are designed for the installation of roof fans with connection nominal diameters of 110-1000 mm, which have been manufactured on-site to fit existing bases. It features a flange for direct mounting of a fan. They are typically supplied in the material PPs, but special materials are available upon request. For more information, please visit our website or contact us directly.

...The drive for conveyor technology! In addition to the advantages of the flat gear motor, this geared motor represents a particularly economical variant, specifically for plug-in applications and flange designs. As standard, specially developed double-chamber shaft seals by Watt Drive are used, just like in the flat gear motor. Number of sizes: 5 Power range: 0.12 - 30kW Torque range: 56 - 2,800Nm Reduction: 2.9 - 4,000 Output variant: Output shaft, output side on both sides, hollow shaft, hollow shaft with shrink disc, agitator version Mounting/Installation: Support, flange...

... applications. Here we can only show the tip of the iceberg. Challenge us! Nominal sizes::DN 65 - DN 250 Length::EBRO factory standard Top flange::EN ISO 5211 Flange connection::Pipe system - clamping ring groove Max. operating pressure::max. 3 bar Temperature range::-10°C to +130°C, (optional 220°C) (depending on pressure, medium, and type of drive) Housing::Aluminum Disc::1.4301 Shaft::1.4401; 1.4571 or alternatively as specified Gap between housing/disc::0.1 mm to 0.5 mm, depending on application...

... side flange for attachment to unwinding stations with movable arms or with a through hole for mounting on support shafts. Upon request, the clamping head can be supplied with 2 or 3 diameters to accommodate different core diameters. The expansion is achieved through a single rubber sleeve, which, when inflated, ejects the wedges and allows for core reception. The standard dimensions of this model are provided in a table, but other dimensions are available upon request.

... • High overload safety • High efficiency • Great running smoothness • Easy motor attachment (separate flange with coupling) • Special designs are possible We produce 6 sizes: • 2S-R90/00 – for 80 Nm • 2S-R90/0 – for 150 Nm • 2S-R90/1 – for 400 Nm • 2S-R90/2 – for 1,000 Nm • 2S-R90/3 – for 2,000 Nm • 2S-R90/4 – for 4,000 Nm...

...Metalworking in-house Drilling / Fits (H7) Cutting a groove according to DIN 6885/1 Machining the hub / Turning down the hub Metalworking in-house Assembly of flange discs (pressing / gluing / screwing / welding) Inserting worm screws Creating cross holes on the pitch circle for axial attachment to the motor Custom manufacturing according to your requirements for prototypes as well as for series...

...Zinc-plated steel right-angle articulation The attachment of the fixture to the cylinder is done using the pin on the rear flange of the cylinder. Bore diameter 8 & 10 mm...

... cleaning – Depression of 3000 Pascal instead of 2450 Pascal STANDARD EQUIPMENT – Inlet for polluted air (if under depression) – Settling chamber – Filter chamber – Filter cartridges – Trolleys for collecting chips – Compartment for pneumatic cleaning system – Flange for fan connection (if under depression) – Inspection and maintenance door – Position for anti-explosion panels (optional) – Quick attachment system for trolleys 2 Filter cartridges: height 700 mm Filter surface: 16 m² Capacity: 1300 m³/h Trolleys: 2 x 400 liters Dimensions: 1450 x 1200 x 2700 mm...

...featuring rubber suspension and ballast. - A fixed drawbar with a 50 mm diameter coupling ring. - Three stabilizing legs, two of which are adjustable at the rear. - An inlet feed pipe with a self-sealing half-coupling lock and cap, outlet with flange. - Stainless steel bolts for lance attachment. Model: GP3000 In stock: 4 Products...

...For high loads and frequent reversing operation. Up to 1000 Nm nominal torque Very low backlash (15, 10, 5, or 1 arcmin, depending on type) Constant backlash (gear pinion hardened and ground) High efficiency (patented Rotaxe® gearing) Quiet operation (pinion ISO 4) Designed to handle large axial and radial forces High torsional stiffness Wide range of gear reductions Motor attachment in 5 minutes thanks to "easymount" flange For ambient temperatures from -35° to +130°C (depending on type) Increased protection class (IP65) Easy maintenance Food-grade lubrication available upon request...

...Designed to run on all types of IPN or IPE, HEA or HEB profiles, whether straight or curved, the CHV electric trolley from VERLINDE allows for the direct attachment of an upper hook hoist or the coupling of EUROCHAIN hoists. The CHV enables the suspension of any type of lifting device. Variable travel speed from 5 to 20 m/min. The adjustable flange spacing allows it to adapt to all types of IPN, IPE, HEA, or HEB profiles, whether straight or curved. 4 rubber bumpers. Complete trolley, ready for connection. Motor protection IP 55, Class F. Low voltage electrical cabinet.

...Bull's eye levels with mounting flange for screw attachment Sensitivity 30: arc minutes, per 2 mm bubble travel Shape • A: Mounting flange for surface mounting • B: Mounting flange for recessed installation (collar) Housing Aluminum anodized, natural color ALN anodized, black ALS Bubble insert Glass-plastic body Filling colorless-transparent K Casting compound mineral Article number: GN 2277-ALN-25-K-30-A Weight: 5 d1: 25 d2: 12 d3: 17 d4: 21 d5: 2.2 h1: 10 h2: 2...

...Mobile vacuum casting system with an excellent price-performance ratio. Designed as standard for cavity molds with a flange up to 125 x 220 mm in height. (With an optional special adapter, even molds up to 300 mm in height can be used). • Mobility due to 4 running wheels • Max. mold size 125 x 220 mm in height (optionally even up to 300 mm mold height) • For cavity molds with a flange Optional available: Attachment with evacuation container...

...INFICON offers cost-effective feedthroughs with ISO-KF flange connections, which have been used for years in all standard vacuum applications worldwide. In addition to these feedthroughs, a selection of connectors is available for vacuum and atmospheric side cable attachment. For UHV applications, feedthroughs with CF flanges are available in various sizes and technical specifications. Features •2011/65/EU RoHS compliant...

...• Rotor with hardened hammers M10C, optionally interchangeable blades M2C. • Rotor mount with labyrinth for additional protection of bearings against contamination. • Valve block with impact and cavitation protection. • Hydraulic gear pump motor with cast iron flange with drainage. • Safety rubber lips according to CE. • Standard attachment with pins.

...GENERAL DESIGN Designed to operate on any type of straight or curved monorail, this electric trolley is compatible with the hoists VE, EUROCHAIN, and EUROBLOC 11. Flanges: made of heavy-section stamped steel. Their folded ends ensure load and roller safety. Crossbeam: made of profiled, grooved steel. It allows for hoist attachment and adjustment of the flange spacing via assembly angles. High...

...USE : - Lining of the rails and Track. - Switches and Crossings Jointing. ADVANTAGES : Simple, Accurate and Tough. MC-1 Track Lining Ratchet-Wheel (for Standard rails) includes : - 1 Ratchet-Wheel, 100 m. of nylon Wire retaining catch and quick Device for fastening to the Rail Flange. - 1 Line Base with Lateral Adjustment of the Nylon Cord and Device for quick Attachment to the Rail Gauge...