lubrication

...100.000 rpm and an elastic spindle support mean you achieve anoptimal surface quality when working on metallic materials. Noise emissions are also low. Thanks to the turbo drive it can be operated without lubrication (oil-free). No chatter marks also with finest deburring jobs. The TVD 3-100/3 ULTRA is distinguished by special hybrid bearings (steel/ceramic), which lead to a significant improvement of the service life in almost all application areas. Operation:pneumatic Other characteristics:straight,precision,front exhaust,for deburring...

...Protection of electrical equipment (terminal boxes, connectors, ignition circuits, cable ends); Lubrication of small and slow mechanisms that need to operate at extreme temperatures.

... the chain box. With two load hooks for more complex multi-point cross beams or simple rod cross beams with two means of suspension. Standard Features Particularly suited for use as big bag handling hoists and for the movement of all kinds of bulky loads due to the extreme low construction height. Compact, modern design. Usable as synchronised hoist in two-hook design. Very economical and reliable due to the use of proven JDN serial components. No additional motor lubrication required. Fewer parts for operation free of maintenance and wear. Chain box included in standard...

... clamping. They offer very high clamping forces and repeatability of 0.005mm and a centring accuracy of 0.01mm. The Hydraulic vices also have the following options: Clamp Path Monitoring, Fixed Jaw, Central Lubrication System and Positive Air Pressure to prevent swarf ingress. Estimated delivery:On Request...

...Hennig roll-up covers are used in a variety of applications. They are particularly suitable as protective covers in confined spaces. - Simple, cost-effective roll-up design. - High operational safety due to quality springs and ball-bearing rollers with continuous lubrication. - Drive is provided by a special spring, which is dust-tight mounted in a housing. - Suitable for travel speeds of up to...

...Jokisch Migma Rino LGR Improvement of lubrication properties, longer tool life, enhanced surface quality, and good flushing ability.

... recommended for use in a wide range of heavy-duty applications and operating environments found in the on road transport and off road mining, construction, and agricultural industries. The excellent performance of 5W40 is the result of extensive cooperative development work with major equipment builders and application of advanced lubrication technology. As a result, this product meets the...

...Membranes are sealing elements that act as elastically movable partitions, hermetically sealing two spaces against each other while performing a lifting movement that is directed perpendicular to the clamping plane. They require no maintenance, no lubrication, operate without wear, and have a long service life. Thin-walled membranes work almost frictionlessly without breakaway forces. Membranes...

... soft starter is integrated in the main electrical control cabinet. The compressor is equipped with an electrical pre-lubrication oil pump for the crankcase. Air-conditioning for electrical control cabinet for inside temperatures exceeding 40 for soft starter & 45°C for standard electrical cabinet. The frequency inverter electrical cabinet is protected against high temperature through a different selection of internal components (powerblock…).

...Quick click-shut coupling (QuickLock) without threads, no lubrication or elaborate screwing required Fast rod insertion and removal Approximately 40 % quicker installation than screwed rods Absolute stable connection Works around offset pipe bends and joints Minimal deformations Made from one piece of steel Rigid, low wear, as no clamping jaws required No slipping back of the bursting rods due to elastic pulling forces Bursting rod system with practical bursting rod accessories...

...Submersible pumps or booster pumps made of stainless steel in 12 V or 24 V versions Voltage: 12 V or 24 V Flow rate: max. 15 l/min Lift height: max. 6.5 m Delivery pressure: max. 0.65 bar Power consumption: 20 - 30 W Cable length: 1.5 m, viton-coated Housing: Stainless steel, seals: Viton Continuous lubrication: High-performance PTFE grease Diameter / Height: 44 / 130 mm Hose connection: 10 mm Special feature: dismountable Lift height: max. 6.5 m Flow rate: max. 15 l/min Country of origin: Germany Voltage: 12 V DC or 24 V DC...

...Plansee produces materials for wear protection layers, adhesion layers, decorative or DLC coatings. Customized compositions are offered for advanced hard coatings with optimized mechanical and tribological properties. Additionally, the following enhanced properties are possible: improvement of thermal and chemical stability, adding functional properties such as self-lubrication, self-hardening...

...Braided thread primarily used on all heavy sewing machines, loafers, automatic two-needle soles, for machine stitching of the welt, sealing, or decorative purposes. The intertwining of the yarn and the special lubrication ensure high-speed use on thick and difficult materials. The semi-matte sheen gives the stitching a natural appearance.

...Injection device for all kind of waffles; - Robot destined to the automatic removal of waffles; - Automatic brushes; - Cleaning system; - Lubrication system of the waffle irons.

... manufactured by fully automatic welding robots - Able to produce of all kinds of concrete (Ready-mixed concrete, precast concrete, roller-compacted concrete-RCC, heavy concrete, etc.) - High homogeneity even in shorter mixing times - Highly wear-resistant, durable wearing parts - Easy maintenance due to wide maintenance gates and bolted type replaceable linings - Heavy duty gearbox (Brevini or Bonfiglioli from Italy) - Automatic lubrication system (Lincoln - Germany) - Universal compatibility to existing concrete plants with compact design...

...Other sizes will follow. The toothed belt-driven model in size 80 has a load capacity of up to 4100 N and can achieve motion speeds of up to 10 m/s with permissible accelerations of up to 20 m/s². These new linear axes stand out with their consistent motion behavior and precision under medium dynamic loads. • Protection class IP20 • Different motor arrangements are possible due to deflections • Repeatability accuracy +/- 0.05 mm • Guided toothed belt • Central lubrication...

... ambient temperatures from 35 °C up to +110 °C •No maintenance or lubrication required •Almost unlimited lifetime and wear-free with proper shaft alignment Type:Rigid,finned Product applications:For shafts ,transmission Characteristics:Backlash-free Installation system:Sleeve...

...Ceramic ball bearings are fully resistant to corrosion as both the external and internal races are made of stainless steel, while the inner cage is made of plastic material, which is resistant against high temperatures. Thanks to the low friction of the ceramic balls, the seaming rolls require a reduced lubrication – up to five times less than standards. This saves time for the operators and the machine downtime, allowing increased production.

... unique challenges posed by very low temperatures, including material contraction, low-temperature lubrication, and the prevention of frost formation. Under cryogenic conditions, they offer a hermetic seal and precise fluid flow regulation. Industries such as medical cryogenics, aerospace, energy production, and scientific research rely on cryogenic valves to ensure the safety, efficiency, and reliability of their operations.

... for precise cutting Automatic retraction of stock material at end of cut to protect the surface from scratches Single or multi-bar** (bundle) cutting Computer-controlled blade lubrication system System shuts down automatically after cutting the required quantity Interlocked safety guards Windows-based industrial PC with 7’’ LCD colour touch screen HMI & USB cutting job input Internet connection possible for technical support Automatic feeder stroke from 5 – 600mm. Maximum cutting length 9990mm Automatic end of bar sensor *Depending on material **Extra-cost option...

... good emergency running properties due to their porosity and solid lubrication. The offered bearings are RoHS compliant. Although lead provides good emergency running properties, it has been replaced by graphite and MoS2. Variants of Sliding Bearings There are various types of sliding bearings in the high-temperature range. Solid lubricant sliding bearings with embedded graphite pellets and...

The company LELI from Milan has been specializing in the distribution of motion transmission components for over 60 years and provides assistance and maintenance services for assembly, control, and diagnostics. The company has always been known for its professionalism, expertise, efficiency, and utmost attention to customer issues. A tradition that is renewed every day in the search for the most a...

...Within our Platinoil Easy lubrication product range, we also offer references made from 100% certified organic vegetable oils, primarily intended for manufacturing equipment in direct contact with certified organic food.

... external ends, they are assembled on oblique bearings and have life-long lubrication. NOTE: in case of particular products (for example the transport of fertilizers), flexable rollers are fitted instead of standard rollers.

... ball vibrator starts immediately, requires no lubrication, and is self-cleaning. The BD type is made from lightweight die-cast aluminum in three sizes. The only moving part - a steel ball - is driven by compressed air at an extraordinarily high speed on a hardened ball race. This causes strong, high-frequency vibrations in all directions. After installation, this vibrator operates for years without any maintenance. Our ball vibrators are used in the following industries: conveyor technology, dosing, weighing, and screening technology,...

... balls. - Phenolic resin cages are standard, but Torlon® or PEEK cages are available upon request. - Full ball designs are possible for higher load capacity. - The lubrication hole in the ZKLN bearing outer rings allows for re-lubrication if necessary. - Double seals are standard; open bearings can also be supplied upon request.

... base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged to connect a motorised belt conveyor.

...For fast processing of roll goods up to solid wood For edge thicknesses from 0.4 to 10 mm and panel thicknesses up to 60 mm Machine length: 7.3 m, powerful 15-inch Beckhoff control. Equipment - Joining processing unit - CombiMelt gluing system - Automatic edge magazine - Automatic continuous lubrication of the feed chain - Cutting device K 13 - Milling combination of flush and radius milling...

... bearing bush, bearing shell, or sliding strip. The sliding motion occurs directly between the sliding layer of the bearing body and the respective supported part. Lubrication is ensured by embedded lubricants or as a solid layer on a support body. In radial movement, the bearing clearance between the shaft and the sliding layer ensures the mobility of the sliding partners. Sliding bearings are available as radial bearings, axial bearings, strips, half-shells, and in many other designs. They operate quietly,...

... in a single clamping, resulting in high geometric accuracy. Main carrier connection using HV screws. Running wheels with rolling bearing and lifetime lubrication. Drive motor with soft start and soft stop characteristics. With integrated DC power supply for the robust, durable electromechanical disc brake. Drives are completely maintenance-free. Steel construction with single-layer finish in RAL 1007 (daffodil yellow), motors in traffic blue satin finish, RAL 5017. Scope of delivery: Steel construction with built-in chassis, buffers, and buffer plate,...