max process Germany

... maximum of 2 nozzles. Different process gases, such as nitrogen, can also be used here. Power: approx. 400 W per head Channels: max. 2 Temperature: approx. 40° C Process gas: air, nitrogen Potential-free: no Transformer: internal EDC technology: no NDC2 technology: no...

... integrated into a purpose-designed stable housing. The housing is equipped with a touch display for device control... Print area X-axis: 700 mm Print area Z-axis: 400 mm Printing process: SLA Weight: 1,300 kg Max layer thickness: 150 µm Min layer thickness: 5 µm Scanning speed: 20,000 mm/s Wavelength: 354.7 nm...

...We produce precision cast parts using the lost wax casting process, from single pieces to series delivery. Cast parts up to a size of 12x12x25cm Size: max. 12x12x25cm...

...Gear ratio 4:1 - 10:1 - Rated output torque: 35 - 100 Nm - Backlash: less than 7 arcmin - Lubrication: Food-grade gear grease - Max. drive speed: 6000 min-1 - Weight: 2.9 kg Material: Stainless steel 1.4404 Operating temperature: below 60 degrees Celsius in S1 operation Gear ratio: 4:1 - 10:1...

... – max. label width 174 mm System Description Thermal direct or thermal transfer printing process 200 dpi, 300 dpi, or 600 dpi version available Printing speed from 100 mm/s to 300 mm/s Printing width from 104 mm to 168 mm (depending on variant) Label width from 10 – 116 mm or 50 – 174 mm Carrier tape width from 25 – 120 mm or 50 – 178 mm Non-contact label detection via light barrier Easy operation and minimal changeover times Extremely robust and compact design Suitable for processing all common label materials and...

... low temperature dependence, and an amplified signal in current mode. Application: Gas Analysis Target Gas: Sulfur Hexafluoride Package: TO39 Aperture in mm: 1.5 Channels: 2 Min. Temperature °C: -20 Max. Temperature °C: 85 Filling Gas: Krypton...

... unloading times are optimized by the Delta Hybrid. The newly achieved efficiency reduces the consumption of systems, resulting in cost savings. In all cases, the new compressor reliably and continuously delivers conveying air under both overpressure and underpressure. Volume flow: 450 to 5,400 m³/h Overpressure: max 950 to 1,500 mbar Conveying medium: Air, neutral gases...

...is obtained from the soybean. It is the second most produced plant oil worldwide with about 32 %. The leading producer countries are USA, Argentinia, Brazil and China. The soybean oil is a clear to yellowish liquid. It is a by-product of the cultivation of soybean. It is mainly used for animal feed. The oil is obtained by the extraction or refining process of soybean (Glycine max L). Cold...

... travel Y:mm 1900 Table traverse travel Z:mm 2450 Swing diameter:mm 2800 A-axis:degree -100/+60 B-axis:degree endless X/Y/Z:m/min 45 A-axis:rpm 6(12) B-axis:rpm 5.5 Motor spindle , max. Speed:rpm 30000 Max. power (100% ED):kW/Nm 120/83 Total taper:HSK-A63 / (HSK-A 63/80) Positioning uncertainty (P):sec 0,005 / 6 Positioning scatter (Ps):sec 0,0028 / 4 Reversal error (U):sec 0,002 / 3 Weight:t 63 Space requirement for basic machine LxWxH:mm 8930x5410x4520...

... systems in multiple stages. Established procedures and a specific energy input independent of batch size ensure excellent consistent results. They can be seamlessly transferred to production scale – a safe scaling up to Ystral plant construction. The modular design allows for expansion to the PiloTec Plant process installation with Ystral mixing technology, systems for processing powder and liquid...

...Residue-free, quick cleaning Process connection according to Svensk Standard SS 1145 Cleaning out of Place (COP) suitable Sterilisation-in-Place (SIP) up to max. 130 °C [266 °F]...

... bar, Max. 25 bar Operating voltage: 8...30 VDC, 14...30 VDC Output signal: 4...20 mA or 0...10 VDC Pressure connection: G¼ B, ¼ - 18 NPT, M14 x 1.5 Process temperature: -30 ... +100 °C Protection class: IP67, IP65 (depending on connection) Certifications: DNV-GL...

... – 3.39 – 3.76 – 4.13 – 4.50 – 4.93 • Also available according to API 674 • Special media such as seawater, glycol, methanol, oils, etc. available upon request Pressure: max. 2760 bar Flow rate: max. 454 l/min Power: max. 110 kW Weight: 425 kg...

...Ø 6,0 nozzle max 10 liters / hour Purge air connection: Ø 6,0 nozzle max 200 liters / hour Gas electrode: spiral / helix platinum wire Air electrode: spiral platinum wire Comidity Code:90268080 Country of origin:Germany...

... Class 150, -others upon request- Flange facing::EN 1092 Form A/B, ASME RF/FF Top flange::EN ISO 5211 Marking::EN 19 Leak testing::EN 12266 (Leak rate A), ISO 5208 Category 3 Temperature range::-40°C to +200°C (depending on the gasket material) Max. operating pressure::max. 10 bar...

... • Glycol pipelines • Chilled water pipelines are provided by us, including the necessary approvals by a designated authority. For this, we process the following materials: • Unalloyed steels • Stainless steels • Austenitic steels • Plastics (PVC, PP, PE) • Copper...

...The classics among stickers – regardless of the printing technique. There’s really not much to say about their use and application. Whether as inspection labels, warning/informative labels, or simply for all conceivable promotional activities – the possibilities are virtually limitless. We produce using screen and offset printing, with a printing process of up to 120 lines/cm! This is equivalent to a "photorealistic representation" and impresses with top quality.

... verification gas port • Intrinsically Safe per EN50 014 (1977) clause 1.3 • Temperature Range: 1000°F (min) to 3000°F (max) / 538°C (min) to 1649°C (max) • Robust design eliminates "auxiliary sheaths" required on lower quality products • Single side connections ensure cables are safely away from the hot furnace wall • Proven track record: used in more furnaces, boilers and incinerators than all other high-temp probes combined • No drift or accuracy problems common to "side hole" probes • High quality construction eliminates the need for cooling air • Proprietary installation configuration...

...Description H 630 C Manufacturer Heinkel Machine no. 1001/84 Product contacted material Alloy C-22 Basket diameter (mm) 630 Basket height (mm) 400 Filter area (m²) 0.79 Nominal volume (l) 49 RPM (min-1) 2,400 G-force, max (x g) 2,028...

... warehouse logistics, quality assurance, or goods entry/exit, the mobile workstation MAX GO also promotes the reintegration of long-term sick individuals and the inclusion of disabled employees in the work process. As an electric training support, the MAX GO complies with all safety standards and regulations. Under certain conditions, the mobile workstation MAX GO is subsidized up to 100% by integration offices.

...The frequency-controlled winding drive ensures a material-friendly winding process. *Additional winding heads and winding shafts available upon request. Dimensions LxWxH: 1500x900x1400 mm Color: RAL 7005, mouse gray Winding head: Ring Ø 480mm Ring weight: max. 65 kg Length measuring device: Winding goods Ø 1-25 mm Counter: 99999.999 m with reset button Error margin: +/- 0.5% Optional: Shaft for spools: Ø500mm, width max. 310mm Optional: Conformity assessment Optional: Material cutter...

... on-site replacement • Short and interchangeable probes • Suppression of false signals for reliable measurements • High accuracy (± 2 mm) and large measurement range (small dead band) • Easy and time-saving adjustment • ATEX approvals (Ex d, Ex i, Ex t) • Electronic module with SIL2 • Many different process connections and probe types for a variety of applications Approvals: ATEX, IEC-Ex, FM, INMETRO, TR-CU Process temperature range: -40°C to +200°C Pressure range: -1 bar to +40 bar max. Sensitivity: DK value ≥ 1.5...

...Cost-effectively process and machine wood, composites and aluminium: We provide series production angle heads for drilling, milling, sawing and grinding in addition to other units for special applications. Benz units are available in a variety of performance classes, making them ideal for everything from light machining to high-performance continuous operation. We have the solution for your special applications: Customized Benz units for machining centers. Put us to the test! Lubrication:Grease Max. drive speed:24,000 rpm Transmission ratio:1:1 Max. drive torque:8 Nm Weight:about 4.5 kg...

...Application possibilities and advantages of the TCJ series If you use a fluid or fluids up to a viscosity of max. 100 mm²/s at 20 °C (except for substances containing paint, resin and glue), then our self-priming systems of the TCJ series are just the right thing for you. The advantage of our TCJ system is that it reduces and prevents dirt ingress into your process. Our 10- and 25-litre...

... of cable harnesses in the automotive industry - today it is used in many areas for the protection of electrical and electronic components. At 5-40 bar (in individual cases up to max. 60 bar), processing takes place at a much lower pressure than in the classic hotmelt injection moulding process. This makes it easy to directly encapsulate even sensitive components such as circuit boards, sensors, etc. The cycle times are limited to pure encapsulation...

...Processing of your provided blanks: Gear hobbing, up to module 10, max. Ø600mm, quality 7 / Gear shaping, up to module 6, max. Ø500mm, quality 7 / helical/straight/conical/ball-shaped gearing Do you have a blank that needs further processing? We can assist you with that. We process the blank you provide according to your requirements. This can involve a single operation or multiple operations...

...We have a modern machine park consisting of 3-axis and 5-axis CNC milling centers, which form the basis for economical machining of complex components. Our high-precision multi-axis complete machining of milled parts meets the highest quality standards. Max. travel range: 3-axis: x = 1100 mm y = 650 mm || 5-axis: x = 700 mm y = 500 mm. We process all common materials such as aluminum, stainless...

... Process • Automatic Tool Changer, Set Up Parallel to Main Time • Collision Monitoring for Traveling Support Lugs • Internal Coolant Supply • High-Pressure Coolant System for Deep Drilling Oil or Emulsion Control: SIEMENS 840D sl or HEIDENHAIN TNC 640 Travel Path X-Axis: 1,200 mm Travel Path Y-Axis: 800 mm Travel Path Z-Axis: 1,200 mm Travel Path B-Axis (Rotary Table): 360° Travel Path W-Axis: Travel Path W-Axis...

...100% GORE-GFO ® e-PTFE-Fiber with Incorporated Graphite and Silicone Run-In Lubricant Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Extremely wide range of applications for all kind of industries. Easy and safe installation and handling No ageing process Easy to disassemble Protection of shaft against wear (HRC 25) Superb heat...

... temperature to transform the microstructure into martensite and are then quenched. The subsequent tempering process optimally adjusts the required mechanical properties, particularly the desired service hardness and toughness. Tempering is often applied before the thermochemical heat treatment, especially for nitrided parts. Max. dimensions: 480 x 800 x 550 mm Max. weight: 350 kg...