max process Germany

... in the product contact area UVC air disinfection within the peeling area Product length (mm):up to 1600 (optional 3200) Output (product): 6 (depending on product length and shape) Min. diameter (mm):50 Max. diameter (mm):165 Max. product height (mm):50 Max. product width (mm):165 Height (mm):2087 Width (mm):3400 Length (mm):5440 Weight (kg):ca. 2000 Air pressure (bar):6 Compressed air consumption (l/min):50...

... screw version features ground solid shafts with ball bushings. This ensures even greater accuracy during dynamic operation and precise positioning in continuous operation, guaranteeing smooth running and an exceptionally long service life. Drive Type: Screw Drive Size: 40 extended guide carriage Speed: max. 0.24 m/s Country of Origin: Germany Manufacturer: RK Rose+Krieger GmbH Torque: max. 280 Nm Load Capacity: max. 2400 N...

...The UMR type tube forming machines feature an intelligent operating technology with many predefined settings that can be automatically retrieved to achieve perfectly smooth surfaces. When producing flanges with angles of 20°-90°, with a clamping length of 1 x D, the machine achieves perfect sealing surfaces. Flanges up to 90° can be produced in a single cycle. The tools can be changed extremely quickly. With the appropriate tools, the machine can also seal tube ends. Tube diameter: 6 - 42 mm Wall thickness: max. 4 mm (for Ø 42mm in ST 37) RPM: 200 Cycle time: 4 - 15 sec.

... already available after typically 15 ms and can be evaluated by the higher-level control system. Measurement Channels: 6 Max. Number of Active Measurement Channels: 3 Sensor Type: DMS / Potentiometer / Analog Process Signal / Incremental / SSI Sensor Type: EnDat / Torque / Angle of Rotation / Piezo Measurement Accuracy: 0.05 % of full scale Fieldbus Interfaces: I/O Interface / PROFIBUS / PROFINET...

...Low-NOx or CO2-neutral operation possible — Complete system with intelligent control technology and secure remote connection — Proven and durable boiler technology "Made in Germany" Performance: 13,000 to 38,000 kW Safety overpressure: up to 30 bar Max. temperature: up to 225 °C Energy carriers: Gas, Oil, Biogas, Bio-oil, Hydrogen...

... opening for full piloting when feeding into stamping presses with progressive dies. For especially heavygauge materials or high demands in flatness, our VRMZ series FeederStraighteners are the correct answer. They process crosssections as large as 2000 x 5,0 mm. up to 2000 mm material width and 16 mm thickness max crosssection approx.. 2000 x 5 mm or 650 x 10 mm max net output approx. 50 – 150 m/min max cycles with piloting approx.. 40 – 100 SPM...

...• Nozzles: 17/32, 17/36, 17/40, and 17/45 Customer benefits: • Secure process through setting process monitoring • Force/Stroke diagram • Optional up to 3 evaluation windows (WinTech) • Optional pressure monitoring available • Continuous documentation of the process (database) • Status and errors available online for maintenance purposes • Quality control takes place during production • Brushless motor, thus extremely fast and nearly wear-free • Flexibly applicable...

... Level programmable via analog level probe ▪ Filling under atmospheric pressure ▪ Optional connection for process gas (max. 0.2 bar pressure) ▪ Dispenser holder for easy and stable mounting ▪ Increased process safety through integrated safety device ▪ Split rotor strand for easy & quick interchangeability and lower spare part costs...

... finest weighing technology with demanding hygienic design. It checks up to 300 packages per minute and safely rejects non-conforming products from the production process. In combination with an integrated metal detector the CWHmaxx ensures your quality standard. Max. throughput:300 packages per minute Max. belt speed:79-120 m/min Min. belt speed:5 m/min Belt colors:white and blue Hygiene Design:open design with smooth surfaces made of high quality stainless steel Protection type:IP65 or IP69 Weighing range:50 g to 6 kg...

... lightweight housing, making it ideal for tight spaces in volumetric filling systems. It can be used for filling water or carbonated beverages. The MID is suitable for CIP cleaning processes. Product positioning: For volumetric filling of the most common container sizes Measuring principle: Magnetic inductive Measuring media: Liquids Process pressure: max. 8 bar / 116 psi Process temperature: -20…+60°C / -4…+140°F...

... interface — DHCP automatic network configuration Measurement:according to ISO/IEC 15416 Max. measurement width:75 mm (including light margins) Aperture:6, 8, 10 mil Measuring accuracy:+/-5 average; +/-10 extreme values Power supply:primary 110-240 V~ Dimensions (L x W x H ):222 x 85 x 95 mm Weight:660 g...

... Force: 40 tons Splitting Length: max. 530 mm Splitting Cycle: 15 seconds Hydraulic Oil Capacity: 20 l (HLP46) Product Weight: 335 kg Product Dimensions: 221x101x120-174.3 cm (LxWxH) Features: Log lifter (up to 80 kg), trailer coupling Working Positions: Horizontal Operation: 2-Hand Engine: Briggs & Stratton 13.5 HP Gas Engine, XR2100 Model Number: 25T2 Engine Technology: Single Cylinder, 4-Stroke, Air-Cooled, OHV (Overhead Valves) Displacement: 420 cc Cylinder: Cylinder with Cast Iron Sleeve Bore: 90 mm Stroke: 66 mm Fuel Tank Capacity: 6.6 liters Oil Capacity: 1.1 liters...

...Manufactured by hot press production process with full automatic machines which ensures high performance and efficiency -High quality raw material formulation of diamond tips minimizes the friction and delivers a faster and cooler cut -10mm height of cutting rim guarantees an optimum life time -Manufactured by high quality material which optimizes cutting performance and ensures durability -Ideal for all types of granite -Suitable for both wet and dry cutting Model:RH-3506 Size (mm):230mm Segment Height:10mm Shaft Diameter:22.23mm Max Speed:6650RPM Max Rpm:80m/s...

... belt is driven by a powerful stepper motor with constant speed. The conveyor belts are provided with crossbars at regular intervals to achieve constant product guidance and thus a consistent print result. The distance between the two toothed belt conveyors can be easily adjusted in order to process different product widths. For processing slightly slanted products, the positions of the crossbars can also be adjusted to each other. Products:flat products Weight:32 kg max. product width:300 mm...

... unit, displaying min / max values, calibrating the offset and the end point, configuring the automatic switching-off. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy: 0.125 % FSO BFSL (class 0.1) — 2-line LC display, 4.5-digit 7-segment display, 6-digit 14-segment add. display — hygienic process connections, EHEDG — flush welded stainless steel diaphragm Optional: — min/max function with reset function — offset and end point calibration — setting the pressure unit — configuration of switch-off automatic...

... on the control panel allows for variation in film overlap • Photo cell for detecting pallet height and controlling the stretching process • Stretching a complete pallet (standard) in less than 1 minute possible • Only 1,100 mm space required next to the pallet to be wrapped • Quick threading system (only at 100 MPS) Max. wrapping speed: 93 m/min Battery equipment: 2 standard gel batteries 12 V...

... remaining in the drum is up to less than 1 %. The mobile drum emptying system offers a high degree of flexibility and can also be operated in wet or damp production environments. The system's stainless steel process device bears the protection class IP 66. Delivery rate::max. 50 l/min Delivery pressure::max. 8 bar For drum diameters::560 mm or 571 mm, for conical drums (550 mm on top, 515 mm at the...

... temperature +80 °C Max. short term application temperature +90 °C Minimum application temperature -40 °C Delivery program: iglidur® |170-PF Hotend temperature: 220 - 250 °C Bed temperature: 90 - 110 °C Outstanding wear behaviour of the tribo filaments Harder to process Material table Colour yellow Moisture absorption at 23 °C and 50 %r.h. 0,5 weight-% Max. water absorption 1,6 weight-% Max. long term...

... Storage Capacity: 4 MB (up to 10 runs, 8 thermocouples, 60 min duration, 5 s interval) Measurement Interval: 0.5 s to 50 min Multiple Runs: Logger stores up to 10 measurement runs Cold Junction Compensation: Yes Data Acquisition: Plug and Go; Temperature Trigger Battery Type: Rechargeable NiMH Max. Duration in Process: Up to 24 hours at 100 °C, up to 75 min at 600 °C (model dependent)...

... important prerequisite for a high-quality coating. Depending on the process sequence, pretreatment may involve multiple steps. In this group of processes, Schlötter offers boiling or hot degreasing, electrolytic degreasing for a variety of base materials such as steel, copper, brass, as well as pretreatments for aluminum and zinc die casting.

... a relatively gentle rolling process. By maintaining small gap dimensions, even very small parts can be blasted. The filling and emptying of the machine can be carried out in different ways: In automatic mode with a feeder and discharge trough; in semi-automatic mode, filling can be done manually or via lifting equipment, while emptying can be done directly into customer containers. Filling volume (l): 50 - 550 Max. individual workpiece weight (kg): 10 - 25 Max. batch weight (kg): 100 - 1000...

... system. Depending on the model, the machines are equipped with motors ranging between 4 kW and 90 kW. The throughput capacities of the RUF Biomass presses range between 50 and 1,300 kg/h. Material:Biomass Max. throughput rate (kg/h):50 - 1300 kg/h Power (kW):4 - 90 kW Spec. pressure, max (kg/cm²):700 - 3700 kg/cm² Briquette format:60x40, 60x60, Ø80,150x60, 150x70, 150x75, 150x75 (Knochen), 240x70, 240x80, 240x80(Knochen), 260x100 Weight (t):1,3 - 12 t...

... via an Android or iOS app. Blind rivet processing - aluminum: 2.4 - 4.0 mm (2.0 mm optional) Blind rivet processing - steel: 2.4 - 4.0 mm (2.0 mm optional) Blind rivet processing - stainless steel: 2.4 - 4.0 mm (2.0 mm optional) Blind rivet processing - copper: 2.4 - 4.0 mm (2.0 mm optional) Weight (with battery): 1.3 kg Pulling force: 8,500 N Stroke: 20 mm Charging time: max. 30 min...

...Measuring devices are the first step to the perfect weld. Precise purging is essential for controlling weld quality, particularly when welding high-alloy, corrosion-resistant materials that are highly sensitive to oxygen in the welding process. Oxy Smart: — Battery powered device — For inert gases — For mixed gases with hydrogen (max. 10%) — Measuring cell made of zirconium oxide...

... included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Contact us for a customised offer, tools included! Technology:Forming Drive:Pneumatic Type:Stationary Target sectors:Car body restoration, classic cars, training centres, roofer, aircraft...

... systems allows for a configuration tailored specifically to any requirement. We analyze your needs and configure the laser system individually for you. You can process a wide variety of materials on the eurolaser laser machines. Cut plastics, foams, textiles, adhesive films, and much more. Working area (W x L):: 1,330 mm x 1,630 mm Dimensions (W x L x H):: 2,730 mm x 2,410 mm x 1,600 mm Material pass width:: 1,642 mm Table pass height:: 15 - 55 mm (without material carrier) Laser power:: 60 to 650 watts Speed:: 1 - 1,414 mm/s (in 1 mm increments) Acceleration:: max. 14.1 m/s²...

...Different mesh sizes with open areas of 60% max. make Forbo mesh belts ideal processing belts for cleaning, drying, filtering and cooling. The belts can be supplied in different versions, for example with reinforced belt edges, with fibre-glass or Kevlar-fabric, with tracking- and lateral-profiles. Type:wire mesh Material:polyester Applications:industrial,process Other characteristics:reinforced...

...Promo clips are printed directly in 1 to 5 colors or in 4c Euroscale using pad printing according to the template. The clip is silver-colored and made of high-quality spring steel. Clip size: 14 x 29.5 mm. Due to an intelligent bend, the promo clip can easily hold together 2 to 18 sheets of DIN A4. Printing area on the promo clip: Clip size: 29.5 x 14 mm Max. printing area: 25 x 11.5 x 15 mm Minimum order quantity: from 2,500 pieces Process: 2-color printed using pad printing Material: Spring steel...

... materials: PMMA, optional: PEEK™; valve: PEEK™, FFPM optional: PPS, FPM, EPDM; volume flow sensor: borosilicate Seal materials: FPM, optional: EPDM, FFPM Electronics: ARM Cortex M3 microprocessor Motor: brushless DC-motor (BLDC); nominal voltage 24 V, torque 3.3 mNm; analog hall sensors Electrical connection: D-sub plug, 15-pole (male connector) Power supply: 24 V DC ±10 %, max. 1.5 A Interface: RS-232...

... plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Conductor guides for prevention of short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws. Conductor Diameter:Up to 0.6 mm Max. Cable Diameter:4.5 mm Temperature Load:Max. 350 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:Body color brown...