max process Germany

...The safe high-quality cutting machine for the production process. All cutting blades are made of carefully tested material which ensures optimum cutting quality. 7.5 kW drive max. For hydraulic hose assemblies up to 3” and industrial hose assemblies up to 4”. Unique drive motor with double bearings and oversized shafts •Reduce scrap with straight cuts •More cuts between sharpening while...

...COM-KU®/S is a self-lubricating and maintenance-free plastic plain bearing. However, additional lubrication is possible. It is well suited for simple applications and axial movements Support material/Carrier material:Plastic bearing produced in injection moulding process Static load:≤ 70 N/mm² Dynamic load:≤ 40 N/mm² Sliding speed:≤ 1,0 m/s Friction value:0,08 up to 0,20 µ Temperature strain:-50 up to +100 °C Max. PV-value:0,6 N/mm² x m/s Humidity absorption:0.1 % at 20 °C in 24 h Housing Ø:H7 Bushing inner ø after mounting:E10 Shaft tolerance:h - tolerance (recommended h9)...

...A distance of at least 48 mm from the contact surface to the swivel axis can be proposed. Even a high-pressure interior cooling system of up to 70 bar can be built into the module without the exterior dimensions having to be modified. Rotational speed limit is 6,000 1/min, maximum transmittable torque is 16 Nm, and max. cutting tool diameter is restricted to 10 mm. The swivel head is mainly suitable for drilling or for simple machining tasks. EWS' TWK range is available. for greater demands with regard to torque and performance.

... contract manufacture) with workpiece sizes up to max. 600x400x350 mm Drilling erosion (start hole shooting) with workpiece sizes up to max. 250x350x300 mm Milling technology with workpiece sizes up to max. 650x500x500 mm Turning technology with workpiece sizes up to max. dm 210 x 1000 mm Flat grinding with workpiece sizes up to max. 600x300x375 mm and more…. Even complicated customer requirements are never a problem for us, but are instead a welcome challenge.

... controller has to fulfill, these are the key criteria for the temperature controllers teco wh/whx. As one-circuit and multi-circuit units, our modular temperature controllers in the teco whx series cover a wide performance spectrum. Heating capacities of 12 to 600 kW, max. possible cooling capacities up to 1460 kW* and pump flow rates of max. 200 m3/h are impressive basic data of these technically sophisticated temperature controllers for operation with compressed water up to 220 °C. Display:digital Type:pressurized water,with direct cooling Use:cooling,heating,process Other characteristics:modular...

...2.2 kg Lamp Utilization Duration: 10,000 h Dose: 400 J/m² Max Operating Pressure: 10 bar Enclosure Protection Class: IP 65 Electrical Connection: 230 V/50 Hz or 110-240 V 50/60 Hz 12 V DC or 24 V DC Power: 10 W Fuse: 10 A...

... commissioning of our CNC machines requires the installation of the protective enclosure and the extraction connection. Travel path X: 900 mm Travel path Y: 600 mm Travel path Z: 200 mm (300/400 mm optional) Max. clearance height Z: 220 mm (320/420 mm optional) Clamping area X: 900 mm Clamping area Y: 600 mm Total length: 1650 mm Total width: 1440 mm Total height: 1950 mm Weight approx.: 650 kg Backlash approx.: +/- 0.015 mm Repeat accuracy: 0.01 mm Max. feed rate (diagonal travel): 17000 mm/min Max. working speed: 12000 mm/min...

... support the IBC/A base heater. Using the base heater together with the heating jacket and the insulation cover accelerates the heating process and to reduces heat losses. Max. temperature of insulation:150 °C Outer Material:Silicone Insulation Material:none Protection class:II Cable length:2 meters Type of cable:HO7RN-F with Schuko-plug Fastening:- control:electronic control Control range:0 - 150 °C Heating zones:1 Special sizes possible:yes...

...-adjusting to maintain the lifetime of the seals. The big travel of up to 40 mm offers different end positions in the opening and closing process. Usage of the locking:Automatic pull & push lock  Way of locking:Motorized locked  Nominal voltage:24 V V Duty cycle:10% ED % Power consumption:19 W W Max. static holding force:400 N N Max. load force for electrical unlocking:400 N N Connection:Male 15-pin D-sub-miniature connector  Snap-in function:Yes  Emergency opener:Yes  Operating temprature:0 - 80 °C  Dimensions:117 x 227 x 30 mm ...

... - Reusable and recyclable - Different footprints available ORBIS Europe supports you through the entire process – from development to certification of your packaging solution. Certification:UN4H2 / UN50H Gross load Capacity,:max. 477-915 kg...

... always work accurately and at the highest level is consciously lived and documented throughout all areas of development, production, and service within the company. From the smallest, perfect manual operation to the complex, automated production process - We work precisely. For you.

... perpendicular to the first one, thus allowing for the machining of two sides of a workpiece to perpendicularity in one setup. Accessories, like vacuum chucks, different milling spindles, touch probes for part thickness measurement, machine interferometers and other sensors for insitu measurement of workpiece shape and roughness, make the MMC 5000 machines an effective tool. In addition, various sensors are available for measuring of the workpiece geometry and surface quality during the manufacturing process. max. travel range:5000 mm...

... operation is available if needed. Model: KSE 25 Sheet thickness* [mm]: 2.5 Max round diameter [mm]: 1000 Reach [mm]: 350 Model: KSE 31 Sheet thickness* [mm]: 4.0 Max round diameter [mm]: 1200 Reach [mm]: 280/500 Model: KSE 60 Sheet thickness* [mm]: 6.0 Max round diameter [mm]: 2000 Reach [mm]: 280/500 Model: KSE 100 Sheet thickness* [mm]: 10.0 Max round diameter [mm]: 3200 Reach [mm]: 750...

... positioning facilitate and speed up the entry process. In systems with two stops, the ride to the other level is automatically triggered after the vehicle is positioned. Car Lift: TRAFFICO Load Capacity: max. 5,730 kg Lifting Height: max. 25 m Cabin Width: 2,500 - 3,000 mm Cabin Depth: 5,550 - 7,000 mm Cabin Height: 2,100 - 2,300 mm Stops: 2 - 8 Access Points: 2 - 16 (stacked or opposite)...

...adjustable range: -31000 to +31000 Accuracy:depends on input, see data sheet Output:2 alarm relays SPST, max. load 3 A / 250 V AC and 3A / 30 V DC; Optional: Analogue 0 or 4...20 mA ou Measuring rate:(15 s for the 0…50 mV, 4…20 mA, 0…5 V and 0…10 V input types) A/D converter resolution:128000 levels, display: 62000 levels Power supply:100...240 V AC ± 10%, 50…60 Hz Display:1-row, 5-digit LED...

... to the height-adjustable control panel. Travel Axis X: 450 mm Travel Axis Y: 600 mm Travel Axis Z: 330 mm Rapid linear feeds (dynamic) X-Y-Z: 30 (50) m/min Linear acceleration (dynamic) X-Y-Z: 8 (15) m/s² Linear feed force X-Y-Z: 4500 N Max. vertical opening: 470 mm Max. workpiece diameter: Ø 450 mm Max. workpiece height: 370 mm Collision circle (axis A) at position 0°: Ø 610 mm...

...display of the measurement process through optical and acoustic signals, measurement value storage for 300 measurement values. Advantages of the Testing Device Constant lowering speed: max 3.2 mm/s Automatic force application according to standards. Standards DIN ISO 7619, ASTM D 2240...

...Reishi is one of the most well-known and popular medicinal mushrooms, and for good reason. From us you can buy Reishi as extract, powder and extract or powder capsules. We also offer a special Reishi Triterpene max extract, that is standardized for min. 20% polysaccharides and min 10% triterpenes. This extract has gone through a dual extraction process of water and alcohol. Our normal...

... cycle. Using a flap mechanism, the operator pushes meat pieces into one of the freezer baskets. The transport chain then moves one step to the next basket. The operator repeats this process continuously. The control system cycles the baskets so that after the set time (e.g., 8 minutes), the tempered products are ejected. The meat pieces are placed side by side in transport baskets (max. loading width 1400 mm) and pass through the tempering chamber in about 6 to 20 minutes, depending on the settings.

...High quality, productive longitudinal seam welding calls for the utilisation of advanced, superior technology. This enables us to us to protect and expand our market position despite increasingly fierce competition. Our ELENA® longitudinal seam welders provide unsurpassed technology for welding of longitudinal metallic seams. Typ of material: Aluminium, Brass, Copper, Galvanized steel, Platium, Stainless steel, Steel:Sheet Metal thickness: min :0,15mm max: 10,00 mm Welding Process: MIG/MAG, Plasma, TIG, Plasma Keyhole :max. welding length: 0 - 500 mm, 2000 - 4100 mm ...

... Data Type: Heating: Recirculation Temperature: Recirculation Volume: Heating Power: Exhaust Volume: Dryer Belt: Belt Width: Belt Speed: Dimensions: Electrical Connection: BT 3/2 electric up to 160°C up to 4000 m³/h max. 40 kW approx. 400 m³/h Cam fabric belt, self-regulating 300 mm 0.07 to 2 m/min 4,700 x 2,250 x 2,150 mm (L x W x H) 100 A, 230/400V, 50 Hz, direct connection Experimental Contact Belt Dryer VKBT 3/2 for Contact Drying: The experimental contact belt dryer allows the contact drying process to be simulated at a pilot scale. The...

... control of the loading system. The material is fed via the slide of the loading magazine. Round profile:Ø 5-65 mm Hexagonal material:Ø 5-56 mm Square material:Option Wave length:40-250 mm* Bar feed:servo motor of the existing bar feeder * max. standard length 140mm. :Other lengths available as an option on request.

... D x H):132 x 163 x 312 mm Weight:4 kg Heating capacity:2 kW Pressure pump max.:14 l/min ; 0,25 bar Suction pump max.:10,5 l/min ; 0,17 bar Digital interface:USB, RS232 Permissible ambient temp.:5...40 °C Power supply:230V 1~ 50/60Hz Current max.:10 A...

... and quickly replaced without tools in a short time. Changing dimensions does not take much time anymore. The user... Country of origin: Germany Machine weight: 10.5 kg Pipe OD: 12.7 - 114.3 mm Type: RPG 4.5 Max wall thickness: 3.0 mm...

...disinfectants Cleaning process: High pressure - interior and exterior cleaning, caustic - interior and exterior rinsing, interior disinfection, exterior clear rinsing. Special equipment: Round conveyor with fully automatic container centering Heating: Saturated steam Installation area: Washing system L x W x H = 12250 x 8500 x 5000 mm. Tank system L x W x H = 6000 x 4000 x 2900 mm...

...For SIP (Sterilization In Place), the MANOY® AS dosing piston is fed into the washing hole, which must be designed so that the piston has sufficient expansion capacity during SIP at +140°C to avoid damaging its functionality and shortening its life. After the cleaning process the MANOY® AS dosing piston may only be moved into the dosing hole when a temperature close to the operating temperature (operating temperature +20 °C), and not to exceed +80°C, has been reached. A feed cone into the dosing hole of 10° max. and rounded edges are essential.

... process into customized bags for primary and transport packaging for industry, B2B, or bulk consumers. The respective product is then automatically bagged as usual and transported to the vacuum unit. The standard range (standard product format 500 x 300 x 100 mm) of the vacuum packaging machines of the R-Line includes two standard models: VSM®3005-S (5 pcs. / min.) and VSM®5005-S (10 pcs. / min.). Applications include packaging for food, max. sealing length 500 mm / Station: 5-10 packages / minute...

... Material: PVC, PP, stainless steel, brass Process connection: G1/2" to G2", round and oval flange Electrical connection: PVC and silicone cables Contacts: max. 4 normally closed, normally open, 3 changeover contacts Length: up to 2,000mm Temperature: -40°C to +150°C Pressure: max. 3bar Protection class: up to IP65 Option: Installation of temperature sensors Electrical connection: M12 connector Electrical connection: Aluminum and PS connection housing...

... and fast recovery from atmospheric pressure exposure. (1) Non-linearity, hysteresis, repeatability at 25°C ambient operating temperature without temperature effects after 2 hours operation. (2)... Accuracy (1):0.2 on zero:0.005 on span:0.01 Resolution:0.003 Pressure, max.:400 Response time (2):30 Lowest reading:0.01 Lowest suggested reading:0.05 Lowest suggested control pressure:0.5 Operation...

...enabling high positioning accuracy and repeatability in all process phases with optimal performance assured, with a repeatability within 5 µm. Thrust force transmission is achieved by means of... TT 100-155-225-310:TT 100-155-225-310 TV 60-80-110-140:TV 60-80-110-140 TVS 170-220:TVS 170-220 TH 70-90-145-110:TH 70-90-145-110 Max. running speed:2,5m/s...