high-temperature furnace Germany

...Frenzelit insulation boards are designed for use in high-temperature applications in thermal engineering, plant and furnace construction, process industry, shipping, as well as in building fire protection. The combination of materials results in high temperature resistance. The insulation boards can be processed in various ways, such as drilling, milling, grinding, and water jet cutting.

... loggers The Datapaq TP6 is the perfect solution for the most demanding high-temperature profiling applications with a 316-grade machined stainless-steel case and IP67 rating. Once combined Connectivity:USB or Bluetooth Memory capacity:50,000 data points Accuracy:± 0.5 °C (0.9 °F) – Type K Resolution:± 0.1°C (0.18 °F) Thermocouple type:Type K (J,N,T,R,S,B are available) Multiple run capability:Up to 10 profile runs before returning to PC...

... door opens to the left/right (as per customer request);  Door safety switch,  OTP (Overtemperature protection),  SSR relay,  Ceramic floor plates Chamber volume Liters 294 Rated power not more than kW 30* Rated supply voltage Volts 400 Rated frequency Hz 50/60 Number of phases - 3 Continuous operating temperature °C 1200 Maximum temperature °C 1200 Working chamber material - Bricks / Fibers Working chamber environment - Air Interior dimensions: Width mm 700 Depth mm 700 Height mm 600 Exterior dimensions: Width mm 2100* Depth mm 1800* Height mm 2000*...

...DATAPAQ temperature profiling systems consist of data loggers, thermocouples, heat protection containers, and analysis software. The DATAPAQ TP3 data logger is used with the DATAPAQ Furnace Tracker, DATAPAQ Kiln Tracker, and DATAPAQ Oven Tracker systems. Features: - 10 or 20 measurement channels - Temperature measurement range: -100 °C to 1370 °C - High accuracy: ±0.3 °C - Suitable for TUS and...

...HTO-02, water-cooled furnace for material testing. Heating chamber (D x H): 100 x 170 mm • Lightweight, thermal insulating material (asbestos-free) • Stainless steel furnace housing • The furnace is prepared for the lateral installation of a length change sensor (HT-extensometer) Model HTO-02 • Heating zones: 1 • Max. Temp.: 1600°C • Heating chamber (D x H mm): 100 x 170 • External dimensions (D x H mm): 430 x 625 • Ext. slot (H x W mm): 104 x 32 • Water cooling: yes • Electrical connection: 28V/143A • Phase cut: yes...

...Heating elements and components made of molybdenum, molybdenum-lanthanum, or tungsten High-temperature components For heat treatment at very high temperatures under vacuum or protective gas atmosphere, many components made of refractory metals are used. Our product range includes high-temperature components for furnaces used for annealing (hot zone), hardening, soldering, sintering, MIM (metal...

...SILCABOARD are vacuum-formed high-temperature insulation boards made from special aluminosilicate fiber mixtures. The various bulk densities and classification temperatures allow for targeted use in a wide range of applications in general furnace, machinery, and apparatus construction, as well as in the aluminum industry. SILCABOARD boards have good homogeneity and high dimensional stability...

... alerts. Connect the device to a PC via a USB cable to download recorded data, generate reports, and modify settings. The device is ideal for use in extremely high temperatures, such as in an industrial furnace or in cold storage rooms where temperatures are extremely low. Temperature range: -199 to 1760°C...

...Lubrication of rolling and friction bearings subjected to high temperatures, corrosive environmental influences Lubrication of bearing points at furnace, cooling-bed and conveyor systems, motors and hot-air fans that are subjected to temperature stress Suitable for lubricating exhaust-gas fans Advantages and benefits Reduces wear and friction Good corrosion protection Excellent temperature...

... options — Intelligent boiler control and seamless system integration — Stable supply and durable design "Made in Germany" Performance: 18,000 to 55,000 kg/h Safety overpressure: up to 30 bar Max temperature (ZFR - Saturated steam): up to 235 °C Max temperature (ZFR-X - Hot steam): up to 300 °C Energy source: Gas, oil, biogas, bio-oil, hydrogen...

...Frames and supports are essential in heat treatment facilities to harden the workpieces in a vacuum furnace. Steel frames are still commonly used, but they exhibit significant warping, as vacuum furnaces can reach temperatures of up to 1300°C, and steel has a high thermal expansion. CFC frames made from GE100 do not warp, even when different temperature profiles are applied, resulting in a longer...

...High-temperature insulation for furnace construction, CVD, PVD, coated (film, CCF), uncoated...

...chemistry, in high-temperature furnace construction, in evaporation plants and even in nuclear technology. Tantalum is added as an alloying component to rust and acid-resistant steels. Tantalum carbide is used for the production of hard metals. At E.WAGENER you can obtain tantalum in all common forms, alloys and processing forms, always in accordance with your requirements.

...The insulation board OA 1200 blue is primarily used for thermal insulation, heat and fire protection, and as a sealing plate. It is a high-temperature resistant insulation board designed for the highest demands, with an application temperature of up to 1200 °C. It is available in thicknesses ranging from 1 to 10 mm. The insulation board is applied in furnace construction, machinery and plant...

...Furnace cart bearings are used in applications in the high-temperature range beyond 300°C. Depending on the application, the bearings are supplied either without lubrication or with a special high-temperature grease.

...The Nabertherm high-temperature furnace HTCT 01/16, designed as a tabletop model with SiC heating elements, is ideally suited for CAD/CAM processing of zirconium oxide in dental laboratories. The furnace's C450 controller is freely programmable for the individual sintering of zirconium material. Additional advantages of the Nabertherm high-temperature furnace HTCT 01/16: - Maximum temperature of...

...For temperatures up to 450 °C. High-temperature furnaces Tempering furnace for car chassis stabilisers Previously cold-formed workpieces, e.g. stabilisers, are heated up in the tempering furnace at circulating air temperatures of up to 450°C and maintained at this temperature for an adjustable dwell time. This tempering increases toughness and dissipates residual stresses. Preheating furnace for...

...The Oxyfire™ in-situ oxygen sensor measures oxygen concentrations directly in the "high heat" zones of high temperature furnaces, boilers and incinerators. They are intrinsically safe, requiring no electrical input power, and generating only a low millivolt output. FEATURES • Available in a number of standard lengths up to 48" (1200 mm) • Field performance can be easily verified using integral...

... temperature up to 2,700°C. At higher temperatures, it begins to decrease again. At 2,700°C, graphite has about double the strength compared to room temperature. Graphite is primarily used in the following industrial sectors: - Heat treatment and furnace construction - Sintering processes (powder metallurgy) - Aerospace - Non-ferrous metal industry - Metallurgy - Chemical industry - Glass and quartz glass industry - Mechanical industry - Semiconductor and solar industry - Continuous casting...

... separate temperature zone, including cooling and buffer sections. Do you have questions? Feel free to contact us. Our experts look forward to developing a solution together with you. +49(0)7934–9928–530 thermalsystems@ceracon.com...

...Furnace and furnace car construction, furnace car superstructures, heat exchangers, applications in metallurgy, waste incineration, wood gasification, and burner technology, use in vacuum furnaces and the glass industry. In the construction and repair of furnaces, furnace cars, as well as for superstructures for firing/sintering products at high temperatures, materials such as bricks, special...

... utilizes exhaust heat, energy is returned to the process by preheating the combustion air. Löcher industrial furnace and apparatus construction has already produced chamber kilns up to 24 m in length, 7 m in width, and with batch weights of up to 500 t per piece at 1350 °C. The temperature accuracy of our furnace systems is also recognized by the aerospace industry. Does your desired furnace require special dimensions and temperatures? We will build your custom model exactly according to your specifications. Contact us!

...Made in Germany IBK blast furnace hoses were developed in collaboration with the steel industry. The special structure lends our hoses great reliability under demanding conditions of use. Description - Developed for high-temperature load - Ideal cooling water hose for use at blast furnace - The plies of rubber, glass fiber and stainless steel provide a long service life and a high...

... connector Switching output type: other Switching function type: Amplifier Mechanical mounting condition for the sensor: Flush-mounted Material of the sensor's active surface: Vectra® Cable sheath material: Polytetrafluoroethylene (PTFE) Degree of protection (IP): IP50 Cable entry: Axial Cable entry orientation: Axial Switching frequency: 300Hz Cable length: 3m Ambient temperature: 0 ... 230°C Hysteresis: 15% Thread length: 25mm Sensing range (MAX): 5mm Thread pitch: 1mm Sensor length: 30mm...

...CFC, the ideal construction material for high-temperature applications CFC (Carbon Fiber Reinforced Carbon) is a high-performance composite material made from a carbon or graphite matrix and carbon fibers. The incorporation of the fibers results in a heat-resistant material that can be used in protective gas or vacuum environments at temperatures well above 2000 °C. It also exhibits very low creep tendency. Applications - High temperature - Vacuum furnace construction - Heat treatment - Soldering - Sintering - Fasteners - Plates and profiles - Glass processing...

...Non flamable High electric- and thermal isolation capability Dimensionally stabil Good mechanical structural strength Technical parameters pH 3 - 9 Temperature: t = -100 … +700 °C, short term up to 800 °C Main application Furnace, boiler and chimney doors Expansion joints Exhaust pipes Suitable for Power plant Furnace construction...

...The hardening of unalloyed and high-alloy tool steels is carried out in our vacuum furnace at a maximum hardening temperature of 1250 °C. Through this heat treatment, the steels achieve maximum values of hardness and strength with minimal distortion and a clean surface. This process is particularly suitable for cutting, punching tools, dies, and molds.

...Additive Manufacturing: Powder Bed Melting with Laser in a Vacuum Furnace Selective Laser Melting small to medium components low build rates very high resolution vacuum maximizes density and material consistency build chamber temperature up to 800°C minimizes warping heat treatment not necessary final contour with very good surface finish suitable for TiAl...

...Casting compounds have been developed to manufacture high-temperature parts and to perform castings, encapsulations, etc., on many types of electrical components. Typical areas of application: Electrical: Temperature sensors, electrical feedthroughs, gas igniter electrodes, heating elements, PTS devices, load resistors, control resistors, high-intensity light bulbs, halogen lamps Metallurgy: Brazing devices, crucibles, encapsulation of RF coils, furnace carriers, vessel sintering, heating element holders, welding devices, spacing insulators, induction heating tools.

... in oil, gas, and electrically heated resistance furnace systems. Syncarb Z2e² features oxidation-resistant proprietary internal and external glazes to prevent low-temperature oxidation that occurs in aluminum and other low-temperature alloys. Applications Syncarb Z2e² crucibles are exceptionally well-suited for melting and holding aluminum and other low-temperature alloys, as well as zinc distillation in gas and electrically heated resistance furnaces.