gas flow control France

...Approved flue gas velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to gas and dust CEMS. Measured parameters:Flue-gas velocity Technology:FlueSonic™ Ultrasonic Measurement/Monitoring capability:0 – 50 m/s Stack/Duct diameter suitability:up to 10 m Flue gas temperature:up to 200 °C Baghouse:Yes Cartridge Filter:Yes Coalescent Filter:Yes Cyclone:Yes Electrostatic Precipitator (ESP):Yes Wet Electrostatic Precipitator (WESP):Yes Wet Scrubber:Yes QA checks:Yes...

... thresholds. - Automation cycle failure. - Negative gas sensor. - Insufficient flow in the measuring cells. - Disconnection from the HORA central unit. - Lack of electrical or pneumatic power. - Breakage of the control fuse of the central unit.

... of configuration and system integration: side access, separate display, enhanced connectivity options. Heartbeat technology ensures reliable measurement and compliance verification. Max measurement error Mass flow (liquid): ±0.1% Max measurement error Volumetric flow (liquid): ±0.1% Max measurement error Mass flow (gas): ±0.35% Max measurement error Density (liquid): ±0.0005 g/cm³ Measuring...

...Cryogenic valves are used to regulate the flow of liquefied gases such as oxygen, nitrogen, argon, and hydrogen at very low temperatures. Their role is essential as they ensure precise control of the volume of gas that circulates. These valves provide accurate fluid flow control, which is crucial for the safety and efficiency of many operations. Their specific design takes into account the...

... low boiling point solvents. The 15-position MICROVAP comes standard with stainless steel luer lock hubs and 4-inch x 19-gauge stainless steel needles for easy removal. 15 to 24 samples can be accommodated at once, and the instrument is customized for a sample size with an outer diameter of 10-22mm. If multiple sample sizes are used with the instrument, inserts can be purchased for each sample size. Number of positions: 15 to 24 Number of plates / 96 wells: 1 or 3 Gas flow rate: 0-25 L/min / 0-100 L/min Power W: 180 to 540 W Type of bath / block: None / Dry / Water...

... reference KDI1903M Aspiration type Atmospheric Number of cylinders 3 Cylinder arrangement L Displacement (L) 1.86 Bore (mm) 88 Stroke (mm) 102 Compression ratio 18.5 : 1 Speed (RPM) 1500 Piston speed (m/s) 5.10 Power ESP (kW) 19 Regulation class (%) +/- 2.5% BMEP (bar) 7.52 Regulation type Mechanical Exhaust gas temperature @ ESP 50Hz (°C) 520 Exhaust gas flow @ ESP 50Hz (L/s) 59 Exhaust back...

...Cyclones, also known as cyclone separators, are devices used to remove solid particles or liquid droplets suspended in an air or gas flow. They are commonly employed in industrial processes for air pollution control or to separate solid products from gases in operations such as mineral processing, cement manufacturing, energy production, and many other applications. Operating Principle The...

...Elimination of chlorine, bromine, and halogenated compounds (haloanizoles) through filtration on activated carbon. Occasional use on 'clean' network or well water, for the final rinse of all wine and food containers. Mobile stainless steel cart with 2 filtration housings: 01 housing 10" with 5-micron polypropylene cartridge (included) 01 housing 30" with activated carbon cartridge (included) Two pressure control manometers Two inlet/outlet connections in male GAS 1" BSP PMS 5 BAR Indicative hourly flow rate 10 hl/h Reference: DVECTO...

... to 13 l/h Control of the applied voltage and current Maintenance-free MEASUREMENT TECHNIQUE The oxygen pump set uses the principle of ionic conduction of zirconia. When a continuous voltage is applied across the zirconia tube terminals an oxygen flow is created. The quantity of oxygen in the gas circulating inside the zirconia tube will increase, or decrease, according to how the voltage is applied. The partial pressure is measured by the MicroPoas™. EXAMPLES OF APPLICATIONS Study of reactional mixtures Gen'Air...

...Trevisan France offers a diverse range of valve, tube, and actuator pressurization units, allowing our customers to choose the machine that best fits their needs. The skid is a pressure unit controlled by an electric switch on the control panel or through manual needle valves (gas). The operator directly controls each operation; a safety protection for improperly executed maneuvers is included...

...). Easy to use A proportional mixing valve (-2ME) or 3 simple valves (-3ME), each with a control knob and a scale in %, allow for the adjustment of an infinite mixture. Adjustable mixture flow from 0 to maximum capacity.

...The Flow-Pilot® 80 regulator offers you a technical solution for level control, ensuring optimal efficiency during the filling of your packaged liquids. Continuous liquid flow management will be very useful for the precise transfer of your liquids from your filtration pallet or pasteurizer to the filling machine. Also discover the automatic or semi-automatic filling machines from Technibag...

... 303, stainless steel 316, and PVC, but many others are available upon simple request. JP nozzles are also available in a short version CJP. APPLICATION EXAMPLES - Spray cooling - Mineral washing - Air or gas cooling - Air or gas cleaning - Dust control - Purification - Degreasing and rinsing - Fire protection, etc... Spray angles: 0°, 15°, 20°, 25°, 30°, 40°, 45°, 50°, 60°, 65°, 80°, 90°, 95°, 100°, 110° Straight jets: strong impact regardless of pressure...

...Electronic monitoring using an advanced multifunctional liquid crystal display of the dot matrix type, and the electronic gas control system has the functions of gas control, automatic idle, overheating protection, and speed acquisition. Length: 1140 mm Weight: 6500 kg Speed: 2 km/h Consumption: 2.3 l/h Tensile force capacity: 7.5 kN Available hydraulic pressure: 160 bar Hydraulic flow rate: 21 l/min...

... engine cleaning without disassembling mechanical parts, while also cleaning pistons, injectors, valves, the DPF, spark plugs, and exhaust gas recirculation (EGR) valves thanks to its EGR valve control kit (EGR Pilot).

... the installation. Our services: - Research among over 350 national or regional grants, incentives, or subsidies - Preparation of various files with the organizations - Selection of the craftsman with negotiated prices - Conducting a thermal assessment - Quality control of the work after the project Other works carried out: - External Thermal Insulation - Internal Wall Insulation - Controlled Mechanical Ventilation with Double Flow - Solar Water Heater - Thermodynamic Water Heater - Roofing - Solar Panels...

...and gases help make your processes more reliable, efficient, and cost-effective. PRODUCT CATEGORIES: • powder, dust, aggregate, and smoke flow measurement • flow and blockage detection for solid materials • moisture measurement for powders and aggregates • speed measurement for bulk materials • level measurement • gas measurement and analysis systems • performance monitoring of dust...

... tests and Melt Flow Index • Surface chemistry: contact angle measurement, tensiometer • Brookfield viscosity: viscometer, rheometer, texture and powder flow analyzer • Particle analysis: zeta potential • Rheology of rubbers and polymers: Mooney, MDR, RPA • Heated platens press • Pore and surface characterization • Fuel, lubricant, grease analysis: flash point, vapor tension, etc. • Permeability measurement: air, water, gas...

... instruments and measurement systems for temperature, pressure, humidity, gas analysis, vibration, and flow for applications in Oil & Gas, the environment, pharmaceuticals, chemistry, petrochemicals, and utilizing technologies such as infrared detection, ultrasound, electrochemistry... RESPUR International helps you control, protect, calibrate, and validate your critical processes and applications...

The company ELSTER is based in Lognes. It specializes in the periodic verification and calibration repair for gas meters. Its specialization is in high-tech meters. ELSTER also offers the installation and maintenance of industrial gas meters, pressure regulators, correctors and converters, regulators, pressure reducers, and safety valves. Its offerings also include ultrasonic meters, chromatographs, and gas solenoid valves.

A leader in the manufacturing of actuators and flow control, Rotork operates in all markets where the control of gas and liquid flows is essential. The company also has production sites and a global network of offices and agencies capable of providing assistance on a worldwide scale.

...ADMI is a recognized specialist in the field of measurement and control instruments for:- Pressure / differential pressure.- Air velocity.- Gas and water flow.- Humidity / Temperature.- Levels.- Environmental quality (light, gas concentration, etc.). We operate particularly in the following areas:- HVAC / climate engineering (heating, ventilation, air conditioning), - Air treatment, - Building automation systems, - Industry (pharmaceutical, oil, naval, wastewater treatment, etc.), - Research (laboratories, CEA...).

...-edge research, having filed over 7,200 patents, including the world's first digital sensors for flow and pressure measurement. The group operates worldwide across a wide range of industries, including oil and gas, LNG carriers, chemicals and petrochemicals, electricity generation, pharmaceuticals, food processing, paper and glass manufacturing, metallurgy, water and waste treatment, and environmental sectors.

Intermesures is specialized in the invention, development, manufacturing, and after-sales service of equipment used to control, measure, and transmit the levels of all liquids such as hydrocarbons, chemicals, and food products stored in tanks, reservoirs, and cisterns. Intermesures particularly serves gas stations, generator sets, boiler rooms, and more.