Chains - Import export

Connecting links for DIN ISO 606 duplex roller chains. By Form E, the spring clip must be mounted with the closed end facing the direction of movement. Offset links are required to close the chain if there is an odd number of links. Using offset links reduces the power and tensile strength by 20%.

Packaging unit 5 metres with odd number of links. Ending with an inner link at both ends. Connecting links must be ordered separately. Note Europeantype roller chains acc. to DIN ISO 606 with curved link plates (ISO No. 06 with straight links). All chains are prestretched. Initial lubrication anticorrosion mineral based oil. B7 = maximum value for links. Pitch = PxB1

Packaging unit 5 metres with odd number of links. Ending with an inner link at both ends. Connecting links must be ordered separately. Note Europeantype DIN ISO 606 roller chains with curved link plates (ISO No. 06 with straight links). All chains are prestretched. Not lubricated, the chains must be lubricated depending on the application. The stainless steel roller chains offer excellent corrosion protection and good chemical resistance. They can be used in applications with water and at high temperatures. B7 = maximum value for links. Pitch = PxB1

Plastic chain suitable for industrial, artisanal and domestic use On spools of 25m 7.5mm diameter

Galvanized chain for better resistance to corrosion and external agents Each reel is supplied in a single neutral box Used for any type of fastening in construction, agriculture, mechanics and industry The meters per reel vary in relation to the diameter of the wire

14 K

14 K

14 K

14 K

Welded chain for industrial application From 2mm to 60 mm diameter Hot dip galvanized, galvanized, stainless steel, painted, natural black

Velorest Chain Wax is a 100% biodegradable chain wax, designed to protect your chain and extend its life. During application, the wax penetrates deep into the links and provides a water and dirt-repellent protective layer. The Velorest Chain Wax comes into its own in dry conditions, but it can also work in wet and cold conditions

Velorest Chain Cleaner is a very effective and powerful chain cleaner for all types of bicycle chains. In addition, it is also suitable for the rest of the drivetrain, such as the cassette and derailleur. By regularly thoroughly cleaning the entire powertrain, you ensure that the parts last a lot longer. You also guarantee optimal operation of your Chain Wax or Chain Lube

E4Q energy chains have been developed to provide the best possible solution for unsupported and long travels. Based on the robust E4.1 energy chain standard, which has proven itself over 12 years, the new series brings a long service life and high modularity. - Tool-free opening and closing - Reduced protrusions in the interior, for easier filling when the e-chain® is open - 15 % more pull-out force of the opening webs compared to the E4.1 system - 10 % less weight due to material recesses compared to system E4.1 - Optional 17 dB(A) quieter due to noise-reducing parts made of material optimized for noise level - 40 % less installation time compared to system E4.1 - Up to 35 % savings possible when used in the limit range - 36 months warranty - Predictive maintenance - optional with the isense add-on module Typical applications: Machine tools, crane systems, automation systems

Tensioner Vesconite® plastic. Screw and nut steel. Version Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The chain tensioner set can be combined with all tensioning elements to form a readytoinstall chain clamp. The symmetrical design enables use on both sides. Large radii ensure very quiet running. The highquality plastic does not require any lubrication. The maximum chain speed should not exceed 1.5 m/s in continuous use.

Velorest Chain Wax is a 100% plant-based chain wax designed to protect a chain and extend its lifespan. When applied, the wax penetrates deeply into the links and creates a water and dirt-repellent protective layer. Velorest Chain Wax performs best in dry conditions but also works in wet and cold conditions!

The Velorest Chain Lube Wet is a very high quality chain lubricant. This Chain Lube has been specially developed for wet and heavy conditions. It is suitable for all types of bicycle chains, but especially for mountain bikes and road bikes. Velorest Chain Lube has a unique composition of 15 raw materials and includes wax and Teflon.

The T3 system combines smooth operation, low noise, simple assembly, and economy. The side bands, which snap together, replace a conventional pin and bore connection and prevent relative movements between the joints giving extremely low wear. This means virtually no wear or abrasion (cleanroom). The t-band's geometry means that hardly any polygon effect is generated when the energy chain is placed. The t-band therefore rolls in a very smooth arc, giving extremely low vibration and noise. In order to reduce the manufacturing and installation costs, the t-band is not mounted individually, but – much like the E3 system – in an eight-link length. Due to its low mass, the t-band is suitable for applications with low fill weights and short strokes combined with high speeds and accelerations.

Maintenance-free, compact, quiet and cost-saving complete system - the alternative to the busbar system. For the safe guidance of energy, data, air and liquids in ONE system. - Easy to clean - No particle pollution due to abrasion - Quiet, lubrication-free, and easy to install - Operating speeds of up to 6 m/s in high-acceleration applications - Data rates up to 10 Gbit/s. Safely guides FOC and bus cables - Low space requirement

Upper run guide for long travels, unsupported in swarf areas Especially in machine tools on long travels, when the energy chain has to be used in a sliding manner, metallic swarf is a problem. guidelok is the cost-effective solution for travels, unsupported up to 50m. The guidelok horizontal is more cost-effective than many steel chains or complex sliding systems. Typical industries and applications: Machine tools, applications in swarf area, anywhere where gliding application is not recommended

Guide trough for vertical applications, especially for storage and retrieval units of all kinds, now with even lighter components and simplified installation. Locking lever and guide rails prevent the energy chain from swaying or swinging outwards. - Significant savings in costs and weight when compared with a complete housing - Now for especially narrow aisles as well - This also means low transport costs - Fast, safe and easy assembly with clip-on guide rails - Reduced noise - Easy access for servicing - Energy, data and media are guided in one system safely and without interruption

Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s

Liftband - modular, quiet, space-saving - vertical guidance of energy, data and media. With the liftband, high vertical applications can be implemented, which have a lot of space available horizontally but only allow for low system heights. - Alternative to zig-zag solution - Lighter and with reduced installation space - Vertical applications implemented with ease - Speeds up to 1m/s - Acceleration up to 2m/s2 - Max. extension length 13m - Cable bend radius up to 250mm - Possible application areas: theatre and stage technology, indoor cranes, mobile telescopic antennas -Retracted system - safe storage in a solid steel basket -Chamfered basket: for safe operation -Strong drive plate: for easy attachment to your application -Optimised for space: telescopic steel basket for best use of space

FTA Floating moving end Compensate parallel errors The igus® compensator for gliding applications with E2/000 and small E4.1 energy chains. At moving arms with strong lateral offset the floating moving end provides for a compensation and therefore for a force-free run of the energy chain in the guide trough. This extends the life time of your application. -Small, light and low priced -Compatible with PPDS basic analysis units -The basic ”floating moving end“ can be used with the following chain series: 2500, 2700, 3500, E4.28, E4.32 and E4.42 Max. travel distance:100m Max. acceleration: up zo 50m = 2 m/s 2 | 50-100m = 1 m/s 2

Heavy duty energy feed to the ocean floor. e-chain® for enormously high torque as hanging use with up to 200 m length is possible. Very flexible and adaptable setup, so that large hoses and cables can be guided reliably. -For very high tensile forces -Hanging applications up to 200 m length -Very resistant against dirt and mud -Resistant to salt water and dirt -Very flexible and adaptable -For underwater applications Typical applications: -Offshore -Drilling ships -Oil platforms -Harbours -Ships in general The specially developed, media-resistant and flexible offshore e-chain® from igus® routes even cables with large diameters safely to the application. The heavy duty draw cable holds the weight of the system. Intensive tests in the igus® laboratory have proven the extraordinary load bearing capacity of the offshore chain.

Strain relief from igus® is specifically developed for use in e-chains® and dynamic applications. Thecombination of polymer strain relief components and chainflex® cable materials offers maximum holding force and very high service life for the cables. For a wide variety of applications, igus® offers the best solution with respect to cost and benefits; from the CFXL strain relief for long travels in harsh environments, or the new CFU honeycomb strain relief for fast assembly to the CFN chainfix nuggets for simple and inexpensive strain relief. igus® chainfix strain relief components have been successfully used in thousands of applications around the world for years.

Chain clamps are used mainly in machine and plant construction. Chain clamps enable cylindrical, complicated and large to very large workpieces to be clamped securely and effectively in the quickest and easiest way. Suitable for cylindrical workpieces, valve bodies, pistons etc. The workpiece surface can be protected by attaching the plastic elements. Application: The knurled nut on the clamping bracket can be used to preset the chain length and the clamping force. The required torque is set on the clamping hook. Accessory: Steel roller chains for chain clamp sets 04211-03. Steel turnbuckles for chain clamp sets 04211-06. Steel prisms for chain clamp sets 04211-09. Nuts for T-slots DIN 508 enhanced, 07060. Cap screws DIN EN ISO 4762, 07160. Note: The opening angle of the chain should not exceed 30°. Do not exceed max. permitted tightening torques. Supplied with Chain clamp set 04211-15: Clamping hook. Clamping bracket.

Key chain with snap hook and key ring

Tie chain with plastic tube

Key chain with hook and key ring