Results for
IGUS® GMBH
Germany
E4Q energy chains have been developed to provide the best possible solution for unsupported and long travels. Based on the robust E4.1 energy chain standard, which has proven itself over 12 years, the new series brings a long service life and high modularity. - Tool-free opening and closing - Reduced protrusions in the interior, for easier filling when the e-chain® is open - 15 % more pull-out force of the opening webs compared to the E4.1 system - 10 % less weight due to material recesses compared to system E4.1 - Optional 17 dB(A) quieter due to noise-reducing parts made of material optimized for noise level - 40 % less installation time compared to system E4.1 - Up to 35 % savings possible when used in the limit range - 36 months warranty - Predictive maintenance - optional with the isense add-on module Typical applications: Machine tools, crane systems, automation systems
Request for a quoteIGUS® GMBH
Germany
The T3 system combines smooth operation, low noise, simple assembly, and economy. The side bands, which snap together, replace a conventional pin and bore connection and prevent relative movements between the joints giving extremely low wear. This means virtually no wear or abrasion (cleanroom). The t-band's geometry means that hardly any polygon effect is generated when the energy chain is placed. The t-band therefore rolls in a very smooth arc, giving extremely low vibration and noise. In order to reduce the manufacturing and installation costs, the t-band is not mounted individually, but – much like the E3 system – in an eight-link length. Due to its low mass, the t-band is suitable for applications with low fill weights and short strokes combined with high speeds and accelerations.
Request for a quoteIGUS® GMBH
Germany
Aside from the tried-and-tested uses of the E6, the new generation offers additional advantages which significantly simplify operation. In addition, design changes have improved accessibility to the interior, reduced weight and made assembly easier. - Option without camber (NC) simply by turning the inner link - Extremely quiet due to the small pitch and "brake" in the stop-dog system - (E61.29.070.055.0 at 1m/s = 32dB(A) according to igus internal test 4479) - Extremly low vibration - Low-abrasion connector system (no bolts and holes necessary) - Virtually no polygon effect, thereby "smooth rolling" operation - Smooth interior design for a long lifetime for cables and hoses - E61.29 series: cross bars on both sides can be snapped open and removed along the inner and outer radii - Weight savings approx. 30% compared to the E6 system - Cost-effective
Request for a quoteIGUS® GMBH
Germany
Maintenance-free, compact, quiet and cost-saving complete system - the alternative to the busbar system. For the safe guidance of energy, data, air and liquids in ONE system. - Easy to clean - No particle pollution due to abrasion - Quiet, lubrication-free, and easy to install - Operating speeds of up to 6 m/s in high-acceleration applications - Data rates up to 10 Gbit/s. Safely guides FOC and bus cables - Low space requirement
Request for a quoteIGUS® GMBH
Germany
Upper run guide for long travels, unsupported in swarf areas Especially in machine tools on long travels, when the energy chain has to be used in a sliding manner, metallic swarf is a problem. guidelok is the cost-effective solution for travels, unsupported up to 50m. The guidelok horizontal is more cost-effective than many steel chains or complex sliding systems. Typical industries and applications: Machine tools, applications in swarf area, anywhere where gliding application is not recommended
Request for a quoteIGUS® GMBH
Germany
Guide trough for vertical applications, especially for storage and retrieval units of all kinds, now with even lighter components and simplified installation. Locking lever and guide rails prevent the energy chain from swaying or swinging outwards. - Significant savings in costs and weight when compared with a complete housing - Now for especially narrow aisles as well - This also means low transport costs - Fast, safe and easy assembly with clip-on guide rails - Reduced noise - Easy access for servicing - Energy, data and media are guided in one system safely and without interruption
Request for a quoteIGUS® GMBH
Germany
Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s
Request for a quoteIGUS® GMBH
Germany
Liftband - modular, quiet, space-saving - vertical guidance of energy, data and media. With the liftband, high vertical applications can be implemented, which have a lot of space available horizontally but only allow for low system heights. - Alternative to zig-zag solution - Lighter and with reduced installation space - Vertical applications implemented with ease - Speeds up to 1m/s - Acceleration up to 2m/s2 - Max. extension length 13m - Cable bend radius up to 250mm - Possible application areas: theatre and stage technology, indoor cranes, mobile telescopic antennas -Retracted system - safe storage in a solid steel basket -Chamfered basket: for safe operation -Strong drive plate: for easy attachment to your application -Optimised for space: telescopic steel basket for best use of space
Request for a quoteIGUS® GMBH
Germany
FTA Floating moving end Compensate parallel errors The igus® compensator for gliding applications with E2/000 and small E4.1 energy chains. At moving arms with strong lateral offset the floating moving end provides for a compensation and therefore for a force-free run of the energy chain in the guide trough. This extends the life time of your application. -Small, light and low priced -Compatible with PPDS basic analysis units -The basic ”floating moving end“ can be used with the following chain series: 2500, 2700, 3500, E4.28, E4.32 and E4.42 Max. travel distance:100m Max. acceleration: up zo 50m = 2 m/s 2 | 50-100m = 1 m/s 2
Request for a quoteIGUS® GMBH
Germany
Heavy duty energy feed to the ocean floor. e-chain® for enormously high torque as hanging use with up to 200 m length is possible. Very flexible and adaptable setup, so that large hoses and cables can be guided reliably. -For very high tensile forces -Hanging applications up to 200 m length -Very resistant against dirt and mud -Resistant to salt water and dirt -Very flexible and adaptable -For underwater applications Typical applications: -Offshore -Drilling ships -Oil platforms -Harbours -Ships in general The specially developed, media-resistant and flexible offshore e-chain® from igus® routes even cables with large diameters safely to the application. The heavy duty draw cable holds the weight of the system. Intensive tests in the igus® laboratory have proven the extraordinary load bearing capacity of the offshore chain.
Request for a quoteIGUS® GMBH
Germany
Strain relief from igus® is specifically developed for use in e-chains® and dynamic applications. Thecombination of polymer strain relief components and chainflex® cable materials offers maximum holding force and very high service life for the cables. For a wide variety of applications, igus® offers the best solution with respect to cost and benefits; from the CFXL strain relief for long travels in harsh environments, or the new CFU honeycomb strain relief for fast assembly to the CFN chainfix nuggets for simple and inexpensive strain relief. igus® chainfix strain relief components have been successfully used in thousands of applications around the world for years.
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Key chain with snap hook and key ring
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Tie chain with plastic tube
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Key chain with hook and key ring
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Key chain with hook and key ring
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Lancing chain with 2 D-Rings and one round ring
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Lead chain with snap hook and movable, straight swivel
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BME BAUMASCHINEN ERSATZTEILE INH. DIPL.-ING.(FH) MATHIAS SCHMIDT
Germany
If you are looking for a chain driven undercarriage – we are the right contact for you! With us, you will find multifunctional tracked undercarriages that can easily withstand loads from 300 kilograms to 400.000 tonnes. Depending on the requirements the tracked undercarriages have to meet, we have chain driven undercarriages with replaceable rubber or steel tracks in our assortment. We offer chain driven undercarriages with different characteristics. These include a relatively low ground pressure as well as a 360° turning capability and a good offroad capability on almost any terrain. We also offer you the right drive for special applications. These include, for example, highspeed tracked undercarriages or extendable tracked undercarriages. As a result of the use of highquality components and the optimisation of the interaction between them, the chain driven undercarriages we offer are characterised in particular by their low wear and a high level of comfort.
Request for a quoteBME BAUMASCHINEN ERSATZTEILE INH. DIPL.-ING.(FH) MATHIAS SCHMIDT
Germany
The steel chains in our range are made from highquality materials. From the beginning, it was also our goal to shorten the production process and to balance the sales price of the chains at the lowest possible price level. In this way, we can offer you the highest quality of steel chains at fair prices.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
CIC provides on-site support with experienced specialists when your supply chains threaten to break down, bottlenecks endanger your supply and ability to deliver, or crises need to be mastered quickly, flexibly and internationally. We offer you : Supply chain management Supply Chain Protection Bottleneck management at the supplier Bottleneck management in your production Bottleneck management for quality problems Bottleneck management for tool problems Bottleneck management for personnel problems Bottleneck management in insolvencies Securing the supply of parts Crisis management, also internationally
Request for a quoteRONIX GMBH
Germany
Locking pliers are a type of hand tool that have various models based on their jaw design. Chain Clamp Locking Pliers are best to use for holding and locking around any shape or size. The chain of these pliers plays the role of the jaw and is ideal for awkward shape pieces. With dimensions of 10 inches, Ronix RH-1442 Chain Clamp Locking Pliers can handle many projects that include loosening, tightening, and holding different pieces. Its advanced design improves the performance and convenience of the projects. RH-1442 has a chain length of 500mm and is made of high-quality steel A3 alloy for the highest resistance during industrial applications.
Request for a quoteAQUARIUS GERMANY GMBH
Germany
Todays business requirements in regard to service, reliability and economic efficiency bring new tasks to us as a global acting supplier.
Request for a quoteAQUARIUS GERMANY GMBH
Germany
buckets and round link chain
Request for a quoteResults for
Chains - Import exportNumber of results
33 ProductsCountries
Company type