Tempered - Import export

Dimensions range - Minimal - The format with diagonal min. 300mm, 270 x 50 Diagonal of form not less than 270 mm, Maximal - 3000x1700, 6000 x 2800. Thickness range - 3mm, 4 – 19mm. Notes - Glass designed for tempering must be subjected to edge treatment. Blunting is a sufficient treatment. The tempered glass at APERTE meets the requirements of BS EN 12150 standard.

The Gronemeyer Heliflex continuously operating cooler cools, ferments or tempers general cargo. The products are transported on a plastic Heliflex chain. The chain is wound around two rotating towers in a spiral. The products' discharge temperature can be changed by adjusting the throughput time and/or the temperature in the module. Technical data: —Chain width: up to 400 mm —Usable chain length: up to 1,000 m —Temperature range: +1°C to +85°C —Insulating hood with access doors and inspection windows according to customer request —Cooling unit with direct evaporation or flow-through cooler with coolant (e.g., Sole) —Heat exchanger with hot water or steam connection

The tempering operation includes heating and cooling stages in order to provide compression stress to the exterior surfaces and indirect tensile stress to the middle area of the glasses on the horizontal line. The full-tempered glasses are 5 times more durable than the glasses without any kind of operation. When they got broken, they scatter as partial pieces like really small ice particles not as big pieces. Those scattered pieces are expected to create less damage than the float glasses scattered completely. The tempered glasses which are also known as hardened glasses are a type of safety glasses. The tempered glasses are used for the areas where the glasses are expected to be broken hard and not to harm consumers when they are broken such as front glasses for the buildings, appliance glasses, automotive sector, shower cabins and bath-tub glasses, furniture glasses, railings, banisters, glasses for balcony closing systems.

Our Heat Treating Suppliers are certified by Aeronautical and Automotive Industries. Annealing Normalizing Stress Relieving Quenching and Tempering Vacuum Hardening Homogenization Decarburization Nitriding Carburization Case Hardening and more

100% TEMPERED GLASS Frame: 100% MELAMINE COATED PARTICLE BOARD Thickness: 18 mm Width: 75 cm Height: 35 cm Depth: 75 cm Number of Packages: 1 81 x 82 x 7 cm / 14,6 kg (1 Piece)

It is used to give water for tempering in flour factories. It works semi-mechanically.

Galvanized Steel Strip、Blue Steel Strapping

Its Virtues Powerful anti-aging, this serum contains CBD, hyaluronic acid, jojoba oil & a botox-like active to regenerate and rehydrate the skin from the inside. To be combined with day cream and night cream to multiply its plumping and smoothing effects.

The Datapaq Furnace Tracker Systems for Glass Tempering and Bending from Fluke Process Instruments feature the Datapaq DP5 data logger, low height thermal barriers from our TB75/TB77 range, thermocouples and our intuitive Insight™ Software to create a complete solution. This solution is optimized specifically for the glass tempering process, where the height at the furnace entrance is typically very limited. The system’s unique thermal barrier design includes an exterior ceramic coating to ensure there is no metal contact with furnace rollers. This solution ranges from 29 to 60mm (1.14 to 2.36 in.) high and can be used in temperatures up to 1000°C (1832°F). Data Logger The Datapaq DP5 is the perfect solution for low-height applications like glass tempering due to its size, which can be as low as 11.7mm (0.46 in.) and as narrow as 57 mm (2.24 in.). Once combined with the Datapaq Insight™ Software, you can display information

Permissible loading see Technical Information. Thread end with oval point is permissible.

Also called fixture clamps. The minimal height of this fixture clamp allows numerous clamping problems in fixture and equipment construction to be solved. The brass hex washer offers a gentle yet extremely stable and safe clamping of workpieces. By using several fixture clamps entire pallets can be set-up. “A” = distance from workpiece to screw centre (cam screw). On request: Replacement cam screws.

Novelis Advanz™ 7UHS – s701 is a product developed for structural applications requiring high inservice strength. The 7xxx alloy provides the highest T6 strength among current aluminum alloys and has significantly higher strength over incumbent 6xxx alloys. This in turn offers potential for lightweighting of structural parts over advanced high strength steel options without compromising performance requirements. The alloy-temper can be optimized to provide good balance between strength, crash performance and corrosion resistance. Advanz™ 7UHS – s701 is an excellent choice for strength-dominated structural components, such as A-pillar, B-pillar, door beams as well as various other structural reinforcements. This product exhibits excellent specific strength and specific energy absorption along with good hot formability making it an ideal material for lightweighting of structural reinforcements. All values listed are typical.

Coffee table with tempered glass

Heating system for jams and marmalade The KASAG heating system for jams is used at industrial baking lines for preparing jams and marmalade. Jams or marmalade are conveyed with a pump via heated pipes. Static mixers ensure excellent heat transmission and very short process times. Tempering unit for chocolate for chocolate The KASAG tempering unit is used for heating, cooling, maintaining the consistency of the chocolate and for optimising production processes with chocolate.

<Product Description> All things are standarded and customer can chose just folling its own needs without limitation in use of non commercial sizes. Our raw materials are used only domestic produced for the best guarantee in terms of quality and fair-play even for environmental. In more then 20years of activity .we have been producing a high quality steel strips for different industrial and technical purposed gaining experience to get best results in each market. All processes are done on most modern hardening and tempering facility lines. <Our Company> SAMSUNGSTS is leading manufacturer which is specialized in cold rolled, hardened tempered high carbon steel strip & alloy steel strip & stainlesss steel strip coil & Brush cutter blade & Meat bandsaw blade & Slice bread blade. we are supplying materials 17countries(Janpan, USA, Germany, Sweden, Italy, UK, Rumania, India, Indonesia, Singapore, Taiwan, China) with competitive price and best quality.

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 90 mm

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 80 mm

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 60 mm

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 40 mm