Tempered - Import export

Dimensions range - Minimal - The format with diagonal min. 300mm, 270 x 50 Diagonal of form not less than 270 mm, Maximal - 3000x1700, 6000 x 2800. Thickness range - 3mm, 4 – 19mm. Notes - Glass designed for tempering must be subjected to edge treatment. Blunting is a sufficient treatment. The tempered glass at APERTE meets the requirements of BS EN 12150 standard.

Its Virtues Powerful anti-aging, this serum contains CBD, hyaluronic acid, jojoba oil & a botox-like active to regenerate and rehydrate the skin from the inside. To be combined with day cream and night cream to multiply its plumping and smoothing effects.

Permissible loading see Technical Information. Thread end with oval point is permissible.

Also called fixture clamps. The minimal height of this fixture clamp allows numerous clamping problems in fixture and equipment construction to be solved. The brass hex washer offers a gentle yet extremely stable and safe clamping of workpieces. By using several fixture clamps entire pallets can be set-up. “A” = distance from workpiece to screw centre (cam screw). On request: Replacement cam screws.

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 90 mm

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 80 mm

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 60 mm

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 40 mm

Bar round, hot rolled or forged, tempered, peeled or turned, Tol. acc. DIN EN 10060 or DIN 7527 Page 6, grade 1.4006 QT650, 40 mm

Bar round, hot rolled or forged, tempered, peeled or turned, Tol. acc. DIN EN 10060 or DIN 7527 Page 6, grade 1.4006 QT650, 35 mm

Bar round, hot rolled or forged, tempered, peeled or turned, Tol. acc. DIN EN 10060 or DIN 7527 Page 6, grade 1.4006 QT650, 30 mm

Bar round, hot rolled or forged, tempered, peeled or turned, Tol. acc. DIN EN 10060 or DIN 7527 Page 6, grade 1.4006, 100 mm

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 50 mm

Bar round, hot rolled or forged, tempered, peeled or turned, Tol. acc. DIN EN 10060 or DIN 7527 Page 6, grade 1.4006 QT650, 45 mm

Machine is in good condition and can be inspected under power. Immediately available. Technical specifications in attached document.

Machine is in very good condition Can be inspected under power Availability: 04/2023

Machine can be inspected under power. Availability: February 2022

Machine is in good condition and can be inspected under power. IMMEDIATELY AVAILABLE. Extended tooling package included. More information and video available on request.

New in 05/2020 Machine is in good condition and can be inspected under power. Only 940 cutting hours! Availability: 07/2024

LVD punch press with shears Machine is in good condition and can be inspected under power. Immediately available.

Length: 4437 mm Width: 2734 mm height: 3095 mm Weight: 13400 kg Max working length: 3100 mm Pressing force: 1300kN (130T) Max stroke: 400mm Unloading: 250 mm Installation height: 917 mm V Rapid down: 150 mm/s V operation: 1-10 mm/s V rapid traverse up: 150 mm/s Safety distance: 200 mm Noise level: < 70dBA Max weight per piece: 400 kg Tooling: large set included Availability: to be confirmed More pictures and info on request

Year: 01/2018! Hours of use: 6,100 h Press force: 170 ton Folding length: 4.080 mm Machine is in very good condition and can be inspected under power in France. Immediately available. Standard equipment closed car chassis RAM Spherical suspension of the piston, with the inclination of the piston Electro-hydraulic drive down Hydraulic unit measuring system along the Y axis hydraulic oil in the machine (grease life) oil cooler everse system 2 axle rear system, X and R axes Calibration finger (2 pcs.) Tool pliers2 TRUMPF hand gripper for top tool Manual clamping of the TRUMPF lower tool Edge system Combined with CNC and self-adjusting crown control Intuitive multi-touch controls, Delem T3500T Teleservice on the Internet Built-in Trumpf technology data Network connection Strength 170T Folding length 4080 mm Distance between uprights 2690mm CNC Delem T3500T Gooseneck 420mm Vertical stroke 200mm working speed 15mm/s Number of backgauge axles 4

Pressing force: 10000kN > 1000 Ton Bending lengths: 6000mm long X 32mm thick. 5000mm long X 40mm thick. 3700mm long X 50mm thick. 3000mm long X 65mm thick. 2500mm long X 75mm thick. Machine is in good condition and immediately available. More info on request.

Machine is in very good condition with low hours. Can be inspected under power. IMMEDIATELY AVAILABLE Tooling Package (included) Tooling originally supplied with the machine Bottom tool – 3 x 1030mm V12/30° Bottom tool – 3 x 1030mm V24/30° Bottom tool – 3 x 1030mm V50/60° Upper tool 4 x 515mm P5RFA/30° Upper tool 1 x 1000mm P5RFA/30° segmental Upper tool 4 x 515mm P7RFA/30° Upper tool 1 x 1000mm P7RFA/30° segmental Upper tool – 1 x 100mm P5RFA R/H horn for tray work Upper tool – 1 x 100mm P5RFA L/H horn for tray work Bought additionally Bottom tool – 1 x 1000mm V12/30° segmental Bottom tool – 1 x 1000mm V24/30° segmental Bottom tool – 1 x 1000mm V50/60° segmental Bottom tool – 2 x 1030mm V32/88° Bottom tool – 4 x 515mm V60/60° Upper tool – 2 x 1030mm P8RFA/88° 175mm H Upper tool – 5 x 515mm P4RFA/85° All upper tooling is 250mm high unless otherwise stated. Includes Tooling Trolly 1220 x 1050 x 1100 high 2 x Loading and Unloading Trollies. Tooling weight 600kg Approx

Machine is in good condition and can be inspected under power. Nice set of tooling included (cf. pictures) Availability: 05/2024

Bending length: 4000 mm Bending force: 160T Machine is in good condition. Comes with a nice set of tooling. Can be inspected under power Immediately available. More information/pictures available on request.

Excellent press brake with 650T bending force and 6200 bending length. This machine is in very good condition, immediately available and can be inspected under power. Extensive set of tooling available as well. More information on request.

Bystronic press brake in good condition with a large set of tooling included (cf. pictures with description of tooling) Full technical specifications in attached document. More information on request