Temperature transmitters - Import export

The Series VTP Multi Range Air Velocity Transmitter can simultaneously display and output Air Velocity, Temperature and Pressure (optional). This is the first product to combine all 3 variables in one transmitter making the VTP an exceptional option for multi-variable measuring. The VTP utilizes an industrial 316 Stainless Steel armored RTD sensor as the thermal air velocity measuring component. Using a fully protected 316 SS sensor drastically extends the life of the air velocity sensor and also makes it insensitive to water, dust or corrosion. The VTP comes standard with a LCD and can simultaneously display air velocity, temperature, and pressure. The VTP is easily configured or adjusted in the field with the digital display and keypad. The Air Velocity Range and Pressure Range are both field adjustable as well as units of measure. Other adjustable parameters include signal dampening and low velocity cut off point.

The LSP-TSTS is a slim design easy to use temperature transmitter for Pt100/Pt1000 3 wire or 2 wire temperature sensor. This device provides a linearised 4-20mA signal output, proportional to the temperature characteristic of the Pt100 or Pt1000 sensor. Temperature range can be changed on request before order (Default -15 to 150ºC). Features • RTD type Pt100 or Pt1000 Input • 4 to 20 mA linearised output on current loop or 0-10V • TS-35 DIN rail mounting • +/-0.1% accuracy • Ip40 case • Screw terminals • Easy to use • Supply from current loop

NCS-TT105 Temperature Transmitter adopts fieldbus technology, is a new generation of fieldbus smart temperature transmitter, and is an indispensable field device in process control. NCS-TT105 smart temperature transmitter supports HART, FF, PA protocol and can be widely used in petroleum, chemical, power plant, metallurgy and other industries. NCS-TT105 Smart Temperature Transmitter： 1. Support the latest versions of FF H1, PROFIBUS PA and HART protocols 2. Support 6 types of thermal resistance and 8 types of thermocouple 3. Thermal resistance supports 2-wire, 3-wire and 4-wire 4. The cold end compensation accuracy of thermocouple is ± 1.0℃ 5. High precision (better than grade 0.1), low temperature drift (better than ± 50ppm/℃)

The CarbonSender™ transmitter provides a cost-effective solution for carbon potential and temperature transmission (4-20 mA) to your PLC or SCADA system via Modbus RTU. This DIN rail module provides full probe maintenance / probe burn off functions and reports probe status after each test. Up to four CarbonSenders can be integrated with reference air and burn off functions for up to four probes in a single enclosure.

Engineered for versatility, the Rosemount 644 Temperature Transmitter is available with HART®, FOUNDATION™ Fieldbus or PROFIBUS® protocols in head, field or rail mount styles and a variety of enclosure options. By adding a Local Operator Interface (LOI), you can update your transmitter configuration in the field without tools. For diverse application requirements, this transmitter includes diagnostic capabilities, such as Hot Backup™ capability, sensor drift alert and thermocouple degradation.

This self-calibrating CO2 sensor measures CO2 as well as temperature, relative humidity and ambient light conditions. It needs a 24 VAC supply voltage. This sensor can also directly control an EC-fan, AC fan speed controller or frequency inverter. It has 1 single analogue / modulating output depending on the highest measured value for temperature, humidity or carbon dioxide. If you only want to use it for measuring CO2, you can deactivate the temperature or humidity measurement. The FCMFX-series are available for different types of supply voltages such as 24 VDC, 24 VAC/VDC or 230 VAC. All version have 3 LEDS on the frontpanel showing whether the measured value is within or out of range. Additionally they are available in a version with audible alert. All parameters are accessible via Modbus RTU. This sensor doesn't need to be configured. Once installed it's ready for use.

Freely scalable Adjustable Pt 1000 resistance sensor Assembling to application needs

With Pt100 or Pt1000 sensor NiCr-Ni sensor also available Scalable versions available With practical angle plug

Several probe lengths available Max. measuring range -200 to +500 C With Pt1000 sensor, Compact design, high precision

The ultra-fast M8coolHB pressure transmitter can process pressure changes with a bandwidth of 50 kHz. This is achieved by means of the continuous analog signal that is adjusted by a digital circuit in real time and is amplified to a standardised 0...10V signal. The miniature sensor head with a fine M8 thread can withstand temperatures of up to 1000 °C with suitable cooling, is overload-proof up to a magnitude of five times the measuring range, and is also resistant to vibrations.

Lance design and compact design Switching and range up to 200 C 4..20 mA/0..10V/ 2 x push pull Stainless steel material

Lance design and compact design Switching and range up to 200 C 4..20 mA/0..10V/ 1 x push pull Stainless steel material

The ultra-fast M5HB pressure transmitter can process pressure changes with a bandwidth of 50 kHz. This is achieved by means of the continuous analog signal that is adjusted by a digital circuit in real time and is amplified to a standardised 0...10V signal. The miniature sensor head with a fine M5 thread can withstand temperatures of up to 180 °C, is overload-proof up to a magnitude of five times the measuring range, and is also resistant to vibrations.

The high-temperature pressure transmitters of the 35XHTC series can be used at media temperatures of up to 300 °C. The remote electronics are designed for temperatures of up to 120 °C. They use digital compensation with a mathematical model to achieve an accuracy of 0,5 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output. The standard model of the 35XHTC series has a G1/2 thread as pressure connection.

Temperature transmitter transform the voltage signal of thermocouples or the resistance change of platinum sensors (Pt100) to a 4…20 mA (current loop) or 0…10 V signal.

Temperature transmitter transform the voltage signal of thermocouples or the resistance change of platinum sensors (Pt100,Pt1000) to a 4…20 mA (current loop) or 0…10 V signal.

The RESISTOMAT® model 2311 has been designed and optimized for high-speed applications in automation systems. Up to 100 measurements per second can be achieved. It works on the basis of the welltried four-wire measurement method in which test-lead resistances and contact resistances are eliminated. The instrument leads are monitored for damage by a built-in open circuit detector. A 2-way and 4-way comparator with switching outputs is available for classifications and selections. Of course, temperature compensation is available for any test object material. Specific temperature coefficients can be entered. Temperature recording takes place using a PT100 sensor or a temperature transmitter (pyrometer) with an analog output. A special circuit for protecting the measurement input when measuring inductive test objects has been developed to prevent damage to the meter from voltage peaks produced when the test object is disconnected.

When it comes to the performance of a turbine surface condenser in the operational field of a steam turbine cycle, you need utmost reliability and efficiency. Here’s where Jet Flow’s know how is invaluable. We createcustomise package solutions for each particular customer’s needs. Our General Scope of Supply Condenser Circular Condenser having own Flow, Axial flow or side inlet steam entry. Turbine to Condenser steam duct, including necessary expansion joints. Steam Jet Ejector Vacuum System. Flash tank, drain header and Instrument stand pipe. Dump Tube. Condensate Pump system Pumps are in vertical or horizontal arrangement; either API 610, ISO 5199 or standard manufacturer pump design. Control system Including level control valves pressure and temperature indicators, transmitters and controllers. Interconnecting piping with filter, fittings and valves.

Analogue 2-wire temperature Transmitter The OPTITEMP TT 10 is an analogue, multirange 2-wire temperature transmitter which works together with RTDs of the type Pt100. The main field of application is an industrial environment, therefore the device has a high reliability and an excellent industrial performance. The OPTITEMP TT 10 series consists of 2 different versions in terms of the mounting. The TT 10 R is the rail-mount version for DIN rails whereas the TT 10 C is primarily intended to be mounted in a "B connection head" or larger according to DIN EN 50446. As an alternative you can also mount the in-head version on a DIN rail according to EN 60715 with the help of an optionally available rail mounting kit.

Analogue 3-wire temperature Transmitter The OPTITEMP TT 11 is an analogue, multirange 3-wire temperature transmitter which works together with single resistance thermometers of the type Pt100 and Pt1000. A special feature of the device is its 0...10 VDC output that predestines it for the HVAC systems in building services applications. The transmitter has a high reliability and a good industrial performance. The OPTITEMP TT 11 series consists of 2 different versions in terms of the mounting. The TT 11 R is the rail-mount version for DIN rails whereas the TT 11 C is primarily intended to be mounted in a "B connection head" or larger according to DIN EN 50446. As an alternative you can also mount the in-head version on a DIN rail according to EN 60715 with the help of an optionally available rail mounting kit.

Sensor with extension tube for screw-in The OPTITEMP TRA/TCA-S12 is a temperature assembly for screw-in. It is predominantly used in the lower temperature range (up to +150°C / +302°F). When it features a neck tube, spatially separating the process connection from the  connection head, the connection head cannot heat up as much. This is particularly important when there is a temperature transmitter in the connection head. Form acc. DIN 43772: Form 2G Design: DIN-style, welded, multipart thermowells Process connection: threads: G 1/2, G 3/4, G 1, 1/2" NPT and 3/4" NPT Neck tube connection: with fixed neck tube Tip design: straight tip Diameter: Ø 9, 10, 11 and 12 mm

This device is an advanced transmitter for measuring conductivity and temperature in water treatment applications. It uses WiFi communication for configuration and has configurable analog outputs for both conductivity and temperature measurements. Additionally, it can be connected with sensors that have any type Features • WiFi connection for configuration • MODBUS • Conductivity, resistivity and temperature measurement • Configurable signal output for the conductivity (0 -20mA; 4-20mA; 0-24mA; 0-10V) • Configurable signal output for the temperature (0 -20mA; 4-20mA; 0-24mA; 0-10V) • Switching digital output Relay (Switching point is configurable through setup program) • Cyclical self calibration • Linear temperature compensation • Electrically isolated input, output and supply • DIN rail mounting • Compensation of the cable capacity • Calibration of the cell constant https://www.youtube.com/watch?v=uD7sGGopCY0

Parameters Basic Parameters Bus Power Supply: 9～32VDC Current consumption (static)：≤14mA（FF/PA） 11V～35 VDC(HART) Input Signal: Pt100, Pt1000, Cu50, Cu100 Ω, 0, 0 to 500 ~ 4000 Ω Resistance, B, E, J, N, K, R, S, T eight degrees of Thermocouple, -100mV ~ 100mV Voltage Signal The Channel Number: Single Channel Fieldbus Protocol: FF/PA/HART Insulation: Between the Terminal and the Housing：500Vrms(707VDC) Operating Temperature: -40℃～85℃ Humidity Range: 0%～95%RH Starting Time: ≤5secs. Turnover Time: 0.5secs. Electromagnetic Compatibility: In Line with the GB/T 18268-2010 Explosion-Proof Sign: Ex ia IIC T4 Ga (HART)

It's very popular that our pressure and temperature measurement transmitters in oil and gas market , and HART modem is essential basic equipment. For some customers who want to connect two different industrial networks, we provide a cost-saving solution that gateways equipment. It basically realizes full communication, for Modbus, HART, Profibus, FF and DP. G0310 Modbus to HART Gateway, designed by Microcyber Corporation is a gateway device for Modbus-RTU protocol and HART protocol. As Modbus master, G0310 Modbus to HART Gateway communicates with devices that have Modbus-RTU communication function via RS485 interface. It can convert device data to HART device variables output, and it also supports 4~20mAcurrent output. Connect different control systems (Siemens, Emerson, Schneider Electronics, ABB, Yokogawa, Rockwell, etc.)

The DKRF670 Series by Driesen + Kern GmbH was developed for measuring humidity related parameters especially in industrial applications. All models have a relative humidity measuring range of 0...100%RH and can also measure temperature. Calculated variables such as absolute humidity (g/m3), dew point (°C), mixing ratio (g/kg) are optionally available. The series' measurements are very accurate for humidity (up to +/-1.8%RH) as well as temperature (up to +/-0.1K). An ISO9001 traceable certificate is included in delivery. Three analog output signals are provided for a customer-specific combination of the chosen parameters (relative humidity, temperature, absolute humidity, mixing ratio, dew point). Analog signals can be 0..1/0..5/0..10VDC, and also 4..20mA three-wire. The transducer's electronic circuits are integrated in a robust aluminium housing that is protected against dust and splash water according to protection class IP65, which makes the devices well suited for use in wet...

The Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMT330 is designed for demanding industrial applications where stable measurements and extensive customization are essential. With multiple optionsto choose from, the instrument can be tailored to meet the specific needs of each individual application.

The DKRF420 is a transducer for humidity and temperature designed for flush-mounted boxes. Their benefits become evident when used in museums and historic buildings or in pharmaceutical and medical laboratories. The transducer’s electronic components completely immerse into the flush-mounted box (required mounting depth: 30 mm). It is covered by a mounting plate and can be plastered leaving only the small stainless steel probe (d=8 mm, l=20 mm) stick out of the wall.

The HMW90 Series Humidity and Temperature Transmitters are designed for demanding HVAC applications, where high accuracy, stability, and reliable operation are required. The flexible HMW90 series offers a variety of options and features. Transmitters include a display and a sliding cover with either an opening for the display or a solid front. Both analog and digital output options, including special scalings and calculated parameters, are available.

Vaisala INTERCAP® Humidity and Temperature Transmitter Series HMDW80 measure relative humidity and temperature in various building automation applications. Transmitters combine easy installation and reliable operation with a low requirement for maintenance. The versatile HMDW80 series includes transmitters for wall and duct mounting, IP65-classified transmitters for humid areas, and transmitters with a radiation shield for outdoor use. It also includes temperature-only transmitters and transmitters with an optional display. Calculated humidity parameters – dew point temperature, wet bulb temperature, and enthalpy – are also available.