Synchronous motors - Import export

Unexcited synchronous motors Reluctance motors are used in textile machinery as drive for godets and spinning pumps. In general they are used in inverter application as single drive or group drive. Reluctance motors can be realised for any voltage/frequency ratio U/f. Speed >15.000min1 is possible. A great no. of variations concerning special shaft, flange bearing and housing is available. Reluctance motors are available for hazardous locations in flameproof design.

Application Synchronous motor for compressor in an air-separation plant.

Our synchronous and asynchronous machines are distinguished by their high energy efficiency. The motors are reliable, safe to operate and robust. With our three-phase motors we offer special machines for almost any application. They are designed and built for the specific requirements of the respective drive application. We offer individually adapted motors – both in terms of electrical layout and mechanical design. We provide made-to-measure units, for example, for existing foundations or special bearings to absorb additional forces. The power network conditions on site are taken into account for the electrical layout to ensure that only minor voltage drops occur and a reliable run-up is guaranteed. Our portfolio comprises asynchronous motors with cage or slip-ring rotors as well as synchronous motors with brushless or static excitation.

Photocell Control For Jumbo Film Rupturing Jumbo Edge Motor Control System Edge Folding System Adjustment Oscillation System (Synchronous With Machine Speed) Servo Motor Controlled Rewinding System Omron Brand Servo Motors Omron Brand Plc System Omron Brand 7" Touch Panel

CHARACTERISTICS •Design and manufacturing of orientation moulds were carried out •Having high dimensional precision and impact-resistance •Capable of forming products with inlay •The injection moulding parts are suitable for forming products with various shapes and thin walls •Multi polar magnetization can be carried out as per customer's requirements APPLICATIONS •Different kind of micro-special motor •Different kind of fan motor •Different kind of DC motor •Synchronization electric motor •House electric apparatus •Ice chipper electric motor •Hand-operated electric generator •Automobile motor •Time gauge •Instruments for auto

PMmotors with rotorcage for line start The pmexcited reluctance motors are an alternative to the reluctance motors and can be used in identical applications typical for synchronous motors.

SEW automation solutions With the drive technologies manufactured by SEW, we offer a variety of solutions for a wide range of industries. These are optimally matched to your application and can be used flexibly. Choose from a large variety of frequency converters from the Movidrive, Movitrac, Movidyn and Moviaxis product ranges and benefit from our highquality repairs and other services. The portfolio also includes a number of different motors, servo motors, synchronous motors and geared motors. Since 01.07.2018 we are also an official service partner for SEWEURODRIVE GmbH & Co. KG. With the new, longterm partnership and the even closer and more direct cooperation with the manufacturer resulting from it, you will now be able to make further use of improved services centred around the entire SEWEURODRIVE product portfolio.

GMN high-performance spindles with an integrated motor are designed for those applications and relevant installation situations in close collaboration with our customers. They are available as needed with a synchronous or asynchronous motor, for manual - HGS series - or automatic tool change - HGC, HGT series - and with oil-air or grease lubrication. Additional options are, for example, an AE sensor, vibration sensor or an automatic balancing system.

SEW motors The following options are available for various motors, such as offset geared motors, worm gear motors, servo motors or synchronous motors, manufactured by SEW Purchase a reconditioned replacement part or new part Replace a reconditioned replacement part or new part Purchase product overhaul repair or cleaning & inspection services We will be happy to supply an onsite service incl. support over the phone, upon request. Our extensive replacement parts warehouse with more than 100,000 instantly accessible modules provides our customers with a fast supply of replacement parts ensuring the costs of machine downtimes are kept to a minimum. All of the repaired modules, exchange services and replacement part deliveries of SEW motors come with an 24month warranty*.

The B 400 combines great evaporation performance with economical continuous operation in a sturdy housing. Thanks to the permanent rotation, the air is effectively washed and at the same time humidified before being evenly distributed back into the air in the room without condensation, by means of a 2-speed fan. The B 400s quiet-running synchronous motor enables even large rooms to be humidified without running up large electricity bills. B 400 Benefits in practice: Clearly designed operating panel with hygrostat and fan control and level indicators Rotating evaporation fleece cleans and washes the air 2-speed fan Automatic power-off Adjustable vent grid Robust, powder-coated sheet steel construction With built-in brace for optimal air circulation

The rotary table combination RT3A100 consists of two directly driven rotary tables of the RT3A100 series. The B-axis has a swivelling range from approx. -10° to +110°; the C-axis can be rotated infinitely. The unit is driven by two integrated 3-phase synchronous motors. The drive guarantees highest dynamics and precision. An innovative clamping unit integrated in the housing guarantees high holding forces when the drives are switched off without position changes on the axes. By means of compressed are impact, the holding torque can be increased from 15Nm to 20Nm for special applications. The complete system is supplied as ready-to-connect unit.

Rotary tables with direct drive series RT3 The rotary tables with direct drive are available in different types: RT3A100x100, RT3A100x155, RT3A080x130, RT3A150x100, RT3A150x130, RT3A250x170, RT3A200x060 und RT3G630x225 Rotary tables RT3G630 – high dynamics, high precision, high loading capacity This direct driven rotary table RT3G630 has particularly been developed for machine tool industry and assembly machines. It is characterised by its high precision, highdynamics and its high loading capacity. The rotary table is driven by a permanently excited 3-phase synchronous motor. The rotary plate and the housing are made of gray cast iron.

The machine is adapted with advanced technology in the world. 1. Touch screen and PLC control 2.Low or missing label detect. 4. Synchronized speed selection 5. Servo motor drive for high accuracy and high speed 6. No bottle no labeling.

The NP-HL is base on the NP-RL , it is high speed labeling machine, max labeling speed can reach 300bottles/min,It is suitable for a range of cartons in the range of label size The machine is adapt advanced technology in the world. Touch screen and PLC control Around 30 memory recipes for labeling parameters easy for change bottle size. Low or missing label detect. Synchronized speed selection Servo motor drive for high accuracy and high speed No bottle no labeling.

With Conventional Feed Lines, the focus lies on speed and material surface. That’s why Conventional Feed Lines are equipped with a Coil Reel for pull-off, a Straightener with variable frequency drive a coil loop and a Servo Roll Feed: the loop uncouples the more inert straightening process from the highly dynamic indexing process and thus allows for high line speeds and preservation of the material surface. Since productivity and capacity demands can vary significantly, we have created different control concepts: while small Feed Lines work with a simple pneumatic drag brake at the Coil Reel and an ultrasonic sensor to control the Straightener speed, the large Feed Lines get fully synchronized controls with motor-limited Coil Reels and a smart loop, creating a steady average speed of the whole line. This allows smooth pull-off of high coil weights while the loop remains very calm – in addition, the Servo Roll Feed can work with full dynamics, even at long indexing progressions.

When an initial inspection shows that a repair is not economically feasible, Maintenance Partners can offer you new equipment. This allows us to provide you with a complete solution, even when a replacement is required. We have agreements with various manufacturers and distributors of rotating equipment and can supply: Electric motors Mechanical seals Pumps Gearboxes Gemex Supply of new Electric Motors We supply new electric motors of any brand, such as WEG, ABB, Svend Høyer, Rotor, TECO and Ansaldo. This allows us to provide you with new electro motors in any segment and type. Certified Service Center for WEG Maintenance Partners has been certified as Service Center for WEG . This certification means that Maintenance Partners is an authorized repair workshop for: Induction Squirrel Cage HV Motors Synchronous Machines and Generators DC Motors Field Service

When an initial inspection shows that a repair is not economically feasible, Maintenance Partners can offer you new equipment. This allows us to provide you with a complete solution, even when a replacement is required. We have agreements with various manufacturers and distributors of rotating equipment and can supply: Electric motors Mechanical seals Pumps Gearboxes Gemex Supply of new Electric Motors We supply new electric motors of any brand, such as WEG, ABB, Svend Høyer, Rotor, TECO and Ansaldo. This allows us to provide you with new electro motors in any segment and type. Certified Service Center for WEG Maintenance Partners has been certified as Service Center for WEG . This certification means that Maintenance Partners is an authorized repair workshop for: Induction Squirrel Cage HV Motors Synchronous Machines and Generators DC Motors Field Service This cooperation guarantees that repairs performed by MP meet WEG’s quality standards. Besides this, short lead times and...

Positioner is designed in order to change the piece’s position, tied onto it, to the best and weld. It gives movement opportunity on two independent lines which are rotating and angular positioning. Positioners can be fixed to the ground according to weight and center of gravity of the work piece. Flange rotating speed can be sensitively adjusted with the control. Optionally it can be adapted with Column-bom system as to work synchronized. Rotator and positioning motors are equipped with thermic protector separately.

Application Motor as drive for a reciprocating compressor in a refinery process.

Application Synchronous motor drives the rolling mill as main drive.

Application Motors as driver for wind power nacelles.

Application Asynchronous motor and synchronous motor as drives for turbo compressors in a steel mill.

Application 2 synchronous propulsion motors per ship for cruise liners.

nduction Heating and Joining in one turnkey system. This turnkey system is used to heat electric motor housings with various dimensions for a wide range of joining processes. Example Heating System 1: the die-cast aluminium housing for an asynchronous motor (diameter 450 mm) is heated to approx. 290°C in approx. 5 minutes to fit the wound stator package. The parts are loaded and unloaded from the feeding belt parallel to the working time. The heating process takes place in two independent work stations. The generator has a switched output which means that only one generator is required for the two heating stations. The system is controlled using a SIEMENS PLC controller. Example Heating System 2: the aluminium housing (diameter 140 mm) of a synchronous motor is heated to approx. 280°C in approx. 3 minutes to fit the stator. The component is loaded into and unloaded from the heating station semiautomatically. The system is controlled using a PLC.

Compact spindle with synchronous motor for micron machining with speed up to 60,000 rpm. Due to the bearing arrangement the PRECISE SD3063 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with synchronous motor for micron machining with speed up to 20,000 rpm. Due to the bearing arrangement the PRECISE SD61104 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with synchronous motor for micron machining with speed up to 20,000 rpm. Due to the bearing arrangement the PRECISE SD60124 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with synchronous motor for micron machining with speed up to 36,000 rpm. Due to the bearing arrangement the PRECISE SD50124 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Compact spindle with synchronous motor for micron machining with speed up to 25,000 rpm. Due to the bearing arrangement the PRECISE SD5084 can be used for light milling and drilling application and also for grinding application. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.