Spraying system - Import export

Features Flat spray pneumatic nozzle producing semi-fine (and semi-coarse) atomization having a mean droplet diameter of 50μm or more. (*3) High spray impact with thin flat spray pattern and uniform distribution. Liquid pressure type under the liquid pressures of 0.2–0.5 MPa (ca. 2 bar – 5 bar). Large turn-down ratio with stable spray angle. Spray angle of 60° or 80° *1) Measured at compressed air pressure of 0.4 MPa (ca. 4 bar) and liquid pressure of 0.5 MPa (ca. 5 bar). *2) Free passage diameter of nozzle orifice. *3) Measured by Laser Doppler Method. Applications Cleaning: Printed circuit boards, liquid crystal, liquid crystal display, steel plates [Steel making industry] Surface finish process: Precision cleaning for steel surface treatment, Roll cleaning

WIWOX® Spintec top loader spray chamber washing systems are the solution for fast parts cleaning in maintenance! The parts to be cleaned are placed in the washing basket of the system from above. During the washing process, cleaning fluid is sprayed onto the parts from below, above and from the sides. The basket rotates inside the machine, resulting in an even washing result. The detergent reservoir is located in the bottom of the machine and is also equipped with a heater.

WIWOX® VIVERK are single and multi-stage spray chamber cleaning systems for aqueous cleaning, pretreatment and degreasing of tools and parts. Loading takes place via an extendable platform, which can be loaded at an ergonomic working height. The workpieces are mechanically cleaned by means of pump pressure in the spray chamber process. The temperature-controlled washing liquid is sprayed onto the workpiece via a spray frame.The washing plant is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

Single and multi-stage spray chamber washing systems for industrial cleaning and degreasing of tools and parts. Loading takes place via an extendable loading platform at ergonomic working height. Before cleaning, the loading basket is loaded and moved into the rinsing chamber. The individual stainless steel washing nozzles can be easily maintained and adjusted according to the application. The motor-driven spraying rotor completely revolves around the loaded parts. The washing system is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

In the spraying pre-treatment method, applying chemicals with a certain pressure on the parts creates big positive differences on paint quality and life span. By cleaning and coating the surface of the part before painting, the paint will retain its first-day quality with out any degradation for long years by strong adhesive forces. Our spray tunnels, with the help of automation systems, allow you to be able to produce automatically and continuously with out any touch. Tunnel type spray surface cleaning lines consist of parts like spray nozzles, heat exchangers, dosing pumps and ventilating systems. In our spray lines, the AISI 304 – AISI 316 stainless sheets of steel and polypropylene are used. According to needs of our esteemed customers, horizontal belt type conveyor, compact type, and rotary table type automatic plc controlled washing machines can be produced by us. Some chemicals which are used for surface cleaning must be applied hot. Due to this situation

It ensures the production of the product with the desired properties by providing the appropriate additive for the appropriate feed. It provides continuous and homogeneous mixture with the liquid spray system and can be easily cleaned thanks to its wide covers.

We developed a special process for making fine powder systems and composites from low-viscosity melts. With the patented cryo-spraying process CSP, it has become possible to produce highly sensitive products directly from a hot melt to form a solid powder without after-cooling. The entire spraying process is overlaid with nitrogen and also protects very critical substances against oxidation and thermal stress.

System for spray quality monitoring a multitude of spray nozzles e.g. for agricultural sprayers

Precise atomisation and spraying can be continuous or selective. The revolutionary combination of continuous flask and low-flow spray chamber guarantees perfect spraying of low to highly viscous media with high edge sharpness and minimum overspray. Fields of activity: - Dosing - Coating - Microsputtering - Lubrication - Marking and much more. Materials: - Fats/oils - Colours - Activators/primers - Abrasive materials - Adhesives - Silicones - Solid-laden materials and much more. Advantages: - Constant quantity/area - Uniform spray pattern - Uniform coating - Little overspray/high edge sharpness - Defined volume per revolution - High chemical resistance - High spread - Adjustable round jet - From dot spraying to continuous spraying - Low-maintenance system - flow rate of the medium and atomising air can be regulated independently - High application efficiency

Disinfectant dispenser with automatic spraying system. with wooden mounting Sensor range 0-12 cm (infrared sensor) Battery life (type AA) 1000 hours (batteries not included) 1000ml filling quantity Quantity per spraying process 1.2 ml Including security key for filling

It has an integrated water spray system that ensures optimal saw blade cooling and immediate disposal of sawdust. Due to the extremely efficient working system the water consumption is low and it complies with current safety standards. Also the saw is very robust because of its welded steel construction. The table pad with non-slip rubber coating is also manufactured with great care and combined with the precisely running, easy-to-use cutting table with adjustable angle stop precise cuts are guaranteed.

Eckardt Umformtechnik GmbH Contact-free lubrication Flexible & clean application Our spray systems apply oils and release agents fully contact-free. Making use of this method you guarantee the medium is applied cleanly and evenly, which allows you to act flexibly if not all areas of a material are to be lubricated uniformly. One huge advantage of our spray systems is their extremely fast changeover times to use different grades of oils. Oil/release agent storage; manual and fully automatic control and monitoring of the spray process. We offer our customers a wide range of options. Features & benefits • Minimum setup times when changing spray medium • Different spray nozzles available • Suitable for all fluid media and numerous oil grades Individual solutions for all application purposes EOS systems are perfectly designed to meet the needs of industry to apply oils and release agents. They are solidly built and exceptionally easy to maintain; they reliably and precisely control

We have already designed and built an array of different spray protection systems for indoor and outdoor use at industrial plants on behalf of our customers. These traditionally consist of a loadbearing system made of weatherresistant GRP profiles and transparent, weatherresistant plastic panels. The spray protection system has already been enhanced with e.g. fastener frames for electric distributors, pipe supports, GRP cable bushing systems, GRP doors and ports and special openings for sample extraction. As the GRP spray protection systems for outdoor use are also exposed to high wind loads, we are happy to provide auditable static analysis from an independent structural engineering firm to confirm their stability.

Cover for a salt spray test facility The original plexiglass cover of this salt spray test system needed to be replaced by a new, much sturdier cover. This was designed and manufactured by TC on the basis of GRP profiles and GRP sheet material.

WIWOX® 340 is a weakly alkaline cleaning agent for grease, oil and oil carbon soiling. Very suitable for pre-cleaning or basic cleaning of soiled steel, cast iron and non-ferrous metal or plastic parts in an ultrasonic bath or in a spray cleaning system. After cleaning and without water rinsing, the parts are temporarily protected against corrosion. The final drying can be accelerated by blowing off with compressed air, a warm air flow or treatment in a drying cabinet. WIWOX® 340 can be used in a concentration of 5 – 7 %. Dilution with water depends on the degree of contamination and the intended exposure time. The bath should have a temperature of approx. 60° C. The bath should be kept at a constant temperature. In the field of precision mechanics, longer exposure times are possible depending on the degree of contamination.

For highest contact pressure and high circumferential speed, e.g. for rotary kilns, ball mills, rotary barrel mixers, ball mills, rope winches or friction presses also for guiding elements, slide bars, heavy transport chains and closed wire ropes Lubrication of rotating assemblies of convertors, cranes, crushers and dredges with spray or central lubricating systems Lubrication of heavily loaded gear couplings Advantages and benefits Most suitable for reliable supply of open gears, even at high circumferential speed Very efficient through EP additives in association with a specific combination of solid lubricants and adhesive additives Reliable protection of tooth flanks, even at high temperatures and with extended relubrication time Good pressure resistance of the lubricating film, excellent wear protection The film is not embrittling and aging. Without bitumen, solvent, does not contain heavy metals

Lubrication of fast-running drive chains of all designs for open or semi-open operation without a permanent re-lubricating device, such as motorcycle and bicycle chains Lubrication of hoisting chains such as multirow roller chains or stacker truck chains, as well as single or multiple flat-link articulated chains Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Extreme adhesive strength Extreme wear protection through Moₓ-Active additive Very high resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral For best adhesion, clean the surfaces mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 340 with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Spray on evenly OKS 341 spray. Allow excess to drip off and wait for lubricant to penetrate before resuming operation.

Lubrication of fast-running drive chains of all designs for open or semi-open operation without a permanent re-lubricating device, such as motorcycle and bicycle chains Lubrication of hoisting chains such as multirow roller chains or stacker truck chains, as well as single or multiple flat-link articulated chains Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Extreme adhesive strength Extreme wear protection through Moₓ-Active additive Very high resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 341 For best adhesion, clean the surfaces mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 340 with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Spray on evenly OKS 341 spray. Allow excess to drip off and wait for lubricant to penetrate before resuming operation.

Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 22,5° and 135°. Realized with cutting lenght of 4000 mm (7650 mm with accessories), 5000 mm (9650 mm with accessories), 6000 mm (11650 mm with accessories). It is equipped with the system EC 700x. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged to connect a motorised belt conveyor.

Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Pneumatic tilting of the heads (90°, 45° or 22,5°). The intermediate degrees can be obtainedby manually setting mechanical stops. Realized with cutting lenght of 4000 mm (7650 mm with accessories), 5000 mm (9650 mm with accessories), 6000 mm (11650 mm with accessories). It is equipped with the system EC 609. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged...

Double mitre saw with a fixed unit on the left and the other one movable. Manual positioning of the movable unit. Pneumatic tilting of the heads (90°, 45° or 22,5°). The intermediate degrees can be obtainedby manually setting mechanical stops. Realized with cutting lenght of 4000 mm, 5000 mm, 6000 mm. It is equipped with the system EC 601. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged to connect a motorised belt conveyor.

Spraying system with state-of-the-art high-pressure motor pump group. Pump equipped with ultra-resistant ceramic pistons. Motors are used with great success in the most diverse industrial activities, in particular in hygiene, humidification and cooling processes. Thanks to their exceptional technical characteristics, these groups can work continuously with low maintenance.

Spraying system with state-of-the-art high-pressure motor pump set equipped with bypass, filter and pressure gauge. Pump equipped with ultra-resistant ceramic pistons. Motors are used with great success in the most diverse industrial activities, in particular in hygiene, humidification and cooling processes. Thanks to their exceptional technical characteristics, these groups can work continuously with low maintenance.

Foam spray systems, for direct connection to high pressure washing equipment, for dense, highly effective foam without the need for separate low pressure equipment. Foam lances with and without quick coupling, for quick and efficient connection to the high pressure machine via the rear segment of the gun. Double lance system with injector and stainless steel dosing valve, which allows, using the same equipment connected to high pressure, spraying foam with one lance and rinsing at high pressure with the other lance.

Evaporative closed loop cooling towers : For temperatures above 32°C. Cooling capacities are selected to suit the local site wet bulb temperature, up to 30°C ( Wet Bulb ) to provide the most efficient cooling system. The tower and the water pump are controlled by the compressor’s electrical cabinet. Option : two speeds fan motor for winter and summer, antifreeze protections, tracing. Radiator cooling systems. Selected for maximum ambient temperatures up to 32°C, other selections accepting temporary heat peaks up to 36°C and 40°C during some hours per day. These specific versions are equipped with an automatic spray system with thermostatic control The radiator fans and the water pump are controlled by the compressor’s electrical cabinet. The water pump. is mounted on the compressor’s base plate. The cooling system, its functions (automatic spray system for radiators and antifreeze protections for cooling towers) and the water circulating pump are thermostatically monitored by...