Pressure seal - Import export

SIZE: 2" to 24" ENDS: BW,RF,RTJ ASMES CLASS: 600 900 1500 2500# DESIGN: - Gate, globe, stop check, “Y” design globe, “Y” model stop check, swing-type Check, tilting disc check and lift check pressure seal valves according to ASME B16.34. - Flexible gate or sliding parallel disc for gate valve. - The operation mode varies according to the customer's needs, since it can be operated by handwheel, impact-type handwheel, chain handwheel, gearbox, electric, pneumatic or hydraulic actuator. - Damper and counterweight for Check valves. - Bypass, bushings, condensate chamber, grease injectors, connections, etc. - Pressure tests according to API 598.

iglidur® sealing lip bearing d1 [mm]: Quick and easy-to-mount polymer bushing made of iglidur® J (JDSM) or iglidur® V400 (VDSM) with clip-on radial shaft seal ring as sealing for the rotating shaft. Seals off against dirt, dust as well as all pressure-less media. Polymer bushing with clip-on radial shaft seal ring Sealing for rotating shaft Temperature application range like iglidur® J Coefficient of friction only 10% higher than in iglidur® J Coefficients of friction identically exceptional like iglidur® J Reduced installation space as well as easy and simple mounting Realizable with numerous sealing types High-temperature option VDSM possible Temperatures till 150° C Material: iglidur® J High temperature option VATM, iglidur® V400 Seal ring made of fluorelastomer Bearing-sealing combinations for other applications on request When to use it? When the penetration of dirt and spray water should be prevented When only a small installation space is available in the axial direction When an existing seal should be integrated in a plain bearing When not to use it? When pressurized media should be sealed When absolute impermeability to the shaft and housing is needed continuously We'll gladly do the developing with you iglidur® sealing lip bearing d1 [mm]:

The main applications are liquids at very high pressure. This seal can also be used for gases if the maximum operating parameters are restricted.

The main applications are liquids at very high pressure. This seal can also be used for gases if the maximum operating parameters are restricted.

The MANOY® U‑Cup is a pressureactivated sealing system. This means that the total sealing force is only ever as high as required to seal the prevailing pressure. This friction optimization saves energy.The MANOY® U‑Cup seals gases and liquids and also highviscosity fluids and pastes in a nonstandard version

The MANOY® U‑Cup is a pressureactivated sealing system. This means that the total sealing force is only ever as high as required to seal the prevailing pressure. This friction optimization saves energy. The MANOY® U‑Cup seals gases and liquids and also highviscosity fluids and pastes in a nonstandard version

The newly developed CinchSeal®series is applicable for machines in food production, screw conveyors and other bulk material handling equipment, in the pharmaceutical industry as well as in the chemical industry. It is made of 316 stainless steel or other material according to customer requirements. standard features ✔ lower maintenance due to unique self-adjusting design ✔ prevent leaks and material loss and protect gearboxes, bearings and shafts from damage ✔ mounting pattern suitable for standard bearings ✔ handles dry powders, pastes, slurries, and liquids ✔ USDA- and FDA-certified sealing products for use in meat, poultry, and dairy applications ✔ needs 30% less energy than packing seals ✔ temperature ranges -40 °C to 220 °C ✔ designed to accommodate longitudinal expansion and axial runout of the shaft ✔ pressurization with sealing air, 0.3 to 0.6 bar above the pressure of the operating vessel

These miniature pressure regulators fit into applications with low space requirements and low pressure levels. They work reliable and have a long life expectancy. A rotary knob is used to set the pressure level. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. A rotary knob is used to set the pressure level. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. These pressure regulators are built with a very robust brass housing. These pressure regulators can be connected by G1/8 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. A rotary knob is used to set the pressure level. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. These pressure regulators can be connected by G1/8 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. Due to their plastic housing these pressure regulators are light-weight and inexpensive. These pressure regulators are installed via flange connection on the bottom side. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These miniature pressure regulators fit into applications with low space requirements and low pressure levels. They work reliable and have a long life expectancy. A rotary knob is used to set the pressure level. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

Our ziplock bags/bags with quick-release fasteners are usually made of PE-LD and are suitable for use in the food sector, among other things. From a material thickness of 50µ, the ziplock bags are freezable. Resealable bags with ziplock are intuitive to use, which is why ziplock bags/zip bags have become the standard packaging in almost all industries. We offer ziplock bags/zip bags in various designs, formats and sizes and would be happy to advise you on the best packaging for your product. Possible variants are ziplock bags with labeling field, ziplock bags with Euro holes or ziplock bags with print. Our zip bags are characterized by their stability, tear resistance and flexibility. In addition, the ziplock bags have good barrier properties. Would you like to have the bags with pressure seals printed? We print your ziplock bags with up to six colors using the flexographic printing process. Motifs that are often requested for ziplock

Product information "Flat bottom pouches, matt gold with aroma valve" Flat bottom pouches gold matt with aroma protection packaging, box bottom pouches for coffee Flat bottom pouches/box pouches are another variant of stand-up pouches. This packaging pouch has a completely flat sealed bottom surface. The Box Pouch is particularly suitable for filling with food and beverages such as coffee bags or for filling goods such as tea, spices, granules, cereals, pastries or animal feed. The aroma protection valve allows the contents to breathe and prevents the entry of air so that the contents last for a long time. Flat bottom bag "GOLD MATT" with aroma valve with aroma valve with tear notches, aroma valve, windowless, without pressure seal / format: 95x230 + 70mm / 110x280 + 80mm / 140x350 + 90mm front side: 129µ valve back side: 129µ approx. 250g / 500g / 1000g price per piece

Product information "Flat bottom pouches black matt with aroma valve, HighBarrier" Flat bottom pouches black matt with aroma protection valve in high barrier, box bottom pouches for coffee Flat bottom pouches/box pouches are another variant of stand-up pouches. This packaging pouch has a completely flat sealed bottom surface. The Box Pouch is particularly suitable for filling with food and beverages such as coffee bags or for filling goods such as tea, spices, granules, cereals, pastries or animal feed. The aroma protection valve allows the contents to breathe and prevents the entry of air so that the contents last for a long time. Flat bottom pouch flat bottom POUCH "BLACK MATT" with aroma valve with aroma valve with tear notches, aroma valve, windowless, without pressure seal/format: 95x230+70mm/110x280+80mm/ 140x350+90mm front side: 129µ valve back side: 129µ approx. 250g/ 500g/1000g price by piece

Product information "Stand-up pouches, transparent frozen matt / aluminum matt" Stand-up pouches Front side: semi-transparent (frosty - milky) / back side: matt aluminum If you want something different. This pouch has a matte finish on both sides. The front is equipped with a milky transparent film. The transparency is a little blurry. This effect is very nice and gives the product some coolness. The back is silver matt. Overall, in the literal sense, a well-rounded pouch. Stand-up pouches guarantee optimal use in the food sector. This stand-up pouch is particularly suitable for phone accessories, cases, the filling of flavored, ground products such as salt, spices, decorative sand, electronic materials, etc. Our stand-up pouches with pressure seal have rounded corners, tear notches and can be sealed above the sealing lip to guarantee tamper evidence. Material: This stand-up pouch is made of composite film, transparent, stable, odorless and resealable.

Product information "Stand-up pouches, black kraft paper with aroma valve, high barrier" Stand-up pouches, stand-up pouches, stand-up pouches made of black kraft paper with pressure lock Stand-up pouches guarantee optimum use in the food sector. Our stand-up pouches are particularly suitable for filling flavored, ground products such as salt, spices, decorative sand, protein, powder, etc. Stand-up pouches / stand-up pouches with a pressure seal have rounded corners, tear notches and can be sealed above the sealing lip to guarantee tamper evidence. Format: 140x270+80mm, 170x310+90mm, 250x340+130mm Material: This stand-up pouch is made of kraft paper and two other coatings, is stable, odorless and resealable. Stand-up pouches provide protection from air, moisture and UV rays. Front: (KP50/PET12/PE60) valve with approx. 250g/ 500g/1000g price by piece Printing: The kraft paper bags in particular look great with a 1-2 colored print to keep

Product information "Stand-up pouches, brown kraft paper with aroma valve, High Barrier" HighBarrier stand-up pouches, stand-up pouches, stand-up pouches made of brown kraft paper with pressure lock Stand-up pouches guarantee optimum use in the food sector. Our stand-up pouches are particularly suitable for filling flavored, ground products such as salt, spices, decorative sand, powder, etc. Stand-up pouches / stand-up pouches with a pressure seal have rounded corners, tear notches and can be sealed above the sealing lip to guarantee tamper evidence. Material: This stand-up pouch is made of kraft paper and two other coatings, is stable, odorless and resealable. Stand-up pouches provide protection from air, moisture and UV rays. Front: valve with approx. 250g/ 500g/1000g price by piece Printing: The kraft paper bags in particular look great with a 1-2 colored print to keep the eco touch. But also high-quality and complex prints up to 12 colors

Product information "Stand-up pouches, brown kraft paper with large window" Choose your desired size. This bag is available in different sizes. Stand-up pouch kraft paper with large viewing window 112µ stand-up pouch kraft paper with pressure seal and large viewing window for different applications, filling weights and filling quantities. Due to their nature, stand-up pouches guarantee optimal use in the food sector. Our stand-up pouches are particularly suitable for filling flavored and ground products such as salt, spices, teas, decorative sand, etc. Our ziplock stand up pouches have rounded corners, tear notches and can be sealed above the sealing lip for tamper evidence. Material: This stand up pouch is made of kraft paper and two other coatings of KP and OPP, stable, odorless and resealable. Our stand-up pouches provide protection from air, moisture and UV rays. Printing: We print your stand-up pouches with your company logo or advertising slogan in up to nine colours.

Product information "Stand-up pouches, brown kraft paper, high barrier" Stand-up pouches, stand-up pouches, stand-up pouches made of brown kraft paper with a pressure lock (high barrier) in various sizes. This product has a very good feel. Slightly flexible and yet very stable standing. from 250-2,000 ml or 70-750g content stand-up pouches guarantee optimal use in the food sector. Our stand-up pouches are particularly suitable for filling flavored, ground products such as salt, spices, decorative sand, protein, powder, etc. Stand-up pouches / stand-up pouches with a pressure seal have rounded corners, tear notches and can be sealed above the sealing lip to guarantee tamper evidence. Material: This stand-up pouch is made of kraft paper and two other coatings, is stable, odorless and resealable. Stand-up pouches provide protection from air, moisture and UV rays. Printing: The kraft paper bags in particular look great with a 1-2 colored print to keep the eco touch.

The laser cutting head FC4 is predominantly used in medium power lasers machines, impresses with its slim design and the related low weight. The use of a deformable (adaptive) mirror is of great importance in this case, since no motorized lens adjustment for focus adjustment is required any more. The focus adjustment via adaptive optics above the focusing lens is fast, reliable and precise. Focus positions for a wide variety of materials can be determined, stored in the machine CNC and called up for controlling the optics as desired. The dynamics of the adaptive optics are also clear when piercing the material before the beginning of the cut – for a full stroke, only 0.2 seconds are required. Especially when cutting thicker materials, the time saving can be considerable. The use of aspheric lenses guarantees the best optical properties; protective glass cassettes on both the collimation side and the pressure seal below the focusing lens protect the optics from contamination.

The laser cutting head FC1 is predominantly used in low to medium power lasers machines, impresses with its slim design and the related low weight. The use of aspheric lenses guarantees the best optical properties; protective glass cassettes on both the collimation side and the pressure seal below the focusing lens protect the optics from contamination. The technical design of the manual adjustment of the focus position is convincing by precision, the focus position can be precisely adjusted without tools via the generously dimensioned adjustment range of 20mm and can safely hold it without countering. The fast distance sensor allows precise control even when cutting the thinnest materials. Thus the FC1 offers excellent cutting performance at an interesting price.

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. Connection is done by 1/8“ NPTF inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. A rotary knob is used to set the pressure level. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. These pressure regulators can be connected by G1/8 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. Connection is done by 1/8“ NPTF inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).

MANUAL LEVER SEALER WITH CONSTANT TEMPERATURE Thermosealing machine that works with sealing bars at a constant temperature for the closure of polypropylene bags and coupled/aluminum laminate, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and controller for controlling the temperature from 30 °C to 200 °C. The closing of the bars is through a quick manual lever that guarantees a high sealing pressure and allows the sealing of envelopes high thickness with or without side gusset. Attention: it is necessary to preheat for about 5 minutes. The sealer is available in two models: ME 300 CFH BZ with checkered knurled bars ME 300 CFH BL with longitudinally knurled bars