Results for
FERPLAST SNC
Italy
MANUAL LEVER SEALER WITH CONSTANT TEMPERATURE Thermosealing machine that works with sealing bars at a constant temperature for the closure of polypropylene bags and coupled/aluminum laminate, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and controller for controlling the temperature from 30 °C to 200 °C. The closing of the bars is through a quick manual lever that guarantees a high sealing pressure and allows the sealing of envelopes high thickness with or without side gusset. Attention: it is necessary to preheat for about 5 minutes. The sealer is available in two models: ME 300 CFH BZ with checkered knurled bars ME 300 CFH BL with longitudinally knurled bars
Request for a quoteMIX SRL
Italy
- Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of installing the fitting for flexible connection SFU - Pressure / vacuum seal up to 0.2 bar - Disc in aluminum or stainless steel AISI 304 (upon request in AISI 316) - NBR gasket (upon request suitable for contact with food) - HNBR Therban - Viton - Gasket profile: for sealing only on the disc or covering the flanges - DN5482 splined drive shaft or ISO 5211 square, both in standard or extended length - ATEX certified version upon request - Manual, motorized or pneumatic actuators
Request for a quoteFERPLAST SNC
Italy
Heat-sealing roller FP802/803 with constant heat which allows the sealing of bags and heat-sealable materials. This roller allows you to make seals with different shapes (square, circular, etc.) according to your needs. Once the roller has been switched on, the operator must wait for the roller to warm up for about 10 minutes. The temperature is adjustable via a potentiometer and reaches a maximum of 200 ° C. There is no graduated scale. The temperature must therefore be set following practical tests on the material. The use is manual. The pressure, the sealing time and the temperature must be managed by the operator. The sealing result depends exclusively on its ability and therefore the result can vary between seals. The coating of the anti-adhesive Teflon roller allows to seal bags in polypropylene, polyethylene and laminated materials. It is supplied complete with a mat in silicone material which, positioned under the product to be sealed, is the ideal match for sealing.
Request for a quoteFERPLAST SNC
Italy
ME-ASD SERIES with 10 mm DOUBLE SEALING BAR BY IMPULSE WITH TEMPERATURE CONTROL Semiautomatic bench sealing machine with electric pedal and double impulse sealing bar with temperature control, (an electronic circuit prevents overheating and allows continuous operation), suitable for closing polyethylene, polypropylene, PVC, aluminum coupled bags, etc. The sealing bars are closed by means of an electromagnet with foot control. Timers for sealing and cooling control ensure maximum reliability on all types of material. The "cold closing" time allows the bars to remain closed for a time set by the operator and apply a pressure that reinforces the sealing. The ME ASD series sealers can in some cases be used for sealing advertising banners and creating pockets for fixing them.
Request for a quoteFERPLAST SNC
Italy
Digital and semiautomatic bench sealer, with electric pedal and sealing bars at constant temperature, for closing polypropylene bags and laminated / laminated aluminum, paper, barrier materials, etc. The "hot bar" type sealing bars are equipped with resistance and electronic thermoregulator. Thanks to the new latest generation electronic control card, all controls, adjustments and alarms are more easily set. The digital control of temperature, time and pause interval, it is more precise and functional, thanks to the new control panel, and to the large 1-line by 16-character alphanumeric LCD display. Temperature adjustment 0-150 ° C, with alarm of ± 5 ° C with respect to the set temperature. The closing of the bars takes place by means of an oversized electromagnet which guarantees a high sealing pressure and allows the sealing of high thickness envelopes with or without side gussets. For a higher production it is sufficient to select the automatic cycle with timed closing.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FERPLAST SNC
Italy
This special automatic table top/vertical with stand constant heat sealer. Are suitable for sealing polypropylene and paired / laminated bags, paper, barrier materials, etc. The sealing jaws of the type "hot bar" are equipped with resistance and thermoregulator for controlling the temperature from 30 ° C to 200 ° C. The closing of the jaws is through an electromagnet which ensures a high sealing pressure and allows the sealing of thick bags with or without side gussets. Operation The operation provides for the closure of bars and seals the bag following operator control, by electric pedal. This allows the operator to grab the bag with both hands, being able to perform a more precise sealing and parallel to the bag. The vertical model with pedestal can be tilted to 90 degrees, has a special support surface to support the bag during sealing. In this way the operator has both hands free to hold the bag since the sealing is made by pressing the pedal.
Request for a quoteFERPLAST SNC
Italy
Wrapping machine constituted by tubular structure on which it is possible to hang the garment already pre-packaged in the upper part. The machine is equipped with sealing bar air that allows the lower welding of the hanging clothing. Sealing width 80 cm. with pneumatic closure bar. Built-in pressure regulator. The sealing is made by pneumatic closing of the bar. You can also change the height of welding in a practical and fast by pneumatic control. In the standard version the adjustment ranges of about 50 cm. On request it is possible to change the height of the weld. Operation: The operator hangs the dress already bagged the top and insert the edges of the bags in the sealing bars. Through the dedicated command adjusts the height of the sealing bar and closes. Operand button welding makes the closure of the envelope. The sealing cycle is indicated by a warning light and can be adjusted up to about 1.
Request for a quotePLAST EMILIA SRL
Italy
We are experts in the production of polyethylene and PVC containers and offer a a wide range of large-scale solutions for caterers, restaurants and discount stores. Polyethylene jars, available with pressure seal caps and screw caps, can be produced in different colors to customize your packaging. Available in different sizes, starting from 500 cc. up to 1,000 cc., all our containers come with one of the caps mentioned above. To complete our offering, we have introduced two large capacity containers of 900 cc and of 1,600 cc. available with a dosing cap or a pressure seal cap. Large polyethylene and PVC containers for restaurants, caterers and discount stores Polythene containers are available with a pressure seal cap or a screw cap, and the caps can also be supplied with a pre-assembled liner for induction sealing. The containers and the caps can be produced in various colors to customize the packaging.
Request for a quoteResults for
Pressure seal - Import exportNumber of results
9 ProductsCompany type