Pneumatics in stainless steel - Import export

Workpieces are clamped and released by compressed air. The possible clamping diameter is from 16 to 20 mm. Material: Body, stainless steel. Seal, NBR. Version: Stainless steel bright. Note for ordering: Cylinder head screws M4X35 for fastening from below are included with delivery. Cylinder head screws with low head M5 for fastening from above are not included with delivery. Note: Installed dimensions for plate thickness 6 mm. The stated retaining forces are related to an operating pressure of 0.5 Mpa and a surface quality of Ra 1.6 µm. Repeat accuracy in this case is ±0.2 mm.

Properties Lubrication-free Low noise level Strong vibration by means of high speed and eccentric working torques Rated frequency 14,000 – 37,000 rpm Centrifugal force 750 – 5,700 N Continuously variable Can be used up to 150°C Resistant to extreme environmental conditions Field of application For foodstuffs and pharmaceuticals, complies with FDA specification Emptying of bunkers Screen filters Vibrating tables Preventing adhesion in pipelines and silos Transporting of fine powders Moving of bulk materials

PPF SERIES: PNEUMATIC FILLERS FOR CREAMS AND SAUCES STAINLESS STEEL AISI 304 - easy washable Volumetric dosing with pneumatic operation series PPF for the dosing of sauces and creams. Stainless steel AISI 304 construction with column for floor installation and adjustable support. Easy use and cleaning idael for small workshops and frequent variations in production. Designed for dispensing food products, chemicals, cosmetics, pharmaceuticals, etc. Available in five models with capacity max. 250 ml. - 500 ml. - 1000 ml. - 2000 ml - 5000 ml. The internal volume of the hopper is approximately 25-30 liters depending on the model. The dispenser is equipped with an adjustable work surface with a maximum height of mm. 500. To obtain a suitable working height to maintain a correct position during the dosage it is advisable to purchase the stainless steel support with feet.

Pneumatic actuated threeway valve made from stainless steel for neutral and aggressive media and high cycle applications. Whitworth pipe thread NPT thread Limit switch Pilot valve Manual override . . . Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Different control functions such as distributing and mixing function Low temperature version Degreased version, Silicon or PTFEfree version …

The CRP-M tote tank mixers are featured with a pneumatic drive and were designed for the application in stainless steel tanks with filling openings of at least 400 mm and mixing volumes of 400 l to 1,500 l. The fast running pneumatic agitators are equipped with bearing and coupling housings. By means of the maintenance unit, pressurized air is enriched with oil for the vane drive. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The manway lid is supplied by the container manufacturer or by the customer. The impellers are designed to fit through the filling opening of at least 400 mm when being inserted. All CRP-M series can be supplied as follows: Lid Muffler Explosion-protection design

Guides, delivered without motor, allows to realize systems with 1, 2 or 3 axes For LinMot® motors P0123, P0137, P0148 Stainless steel version for *SSC motors Presentation of the range of guides for LinMot® motors These guides are intended exclusively for cylindrical linear motors of the LinMot® brand and are broken down into 5 families LB modules for pick and place manipulators LE modules Gantry LR LH guide units comparable to guide units for pneumatic cylinders Guides in stainless steel LX and LW for motors * SSC Special features of the LE and LB modules On LE modules, for vertical applications, it’s possible to have a mechanicalpneumatic brake or a LinMot MagSpring. The LB23 module is equipped with pneumatic balancing (antifall in the event of a power outage but also for high speed by eliminating the impact of gravity).

TOPSIDE BOLT TENSIONER & HYDRAULIC NUT PUMP Standard flow tension pump. Corrosion resistant frame works well for applications near salt water. Standard flow ideal for land based (topside) tension applications where the required power source is compressed air. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Calibrated 6" (150mm) Pressure Gauge Dual oil outlets with quick-connect, no spill couplings Pneumatic Filter/Regulator/Lubricator included Stainless Steel carry frame Designed with Safety in Mind: Easily adjusted pressure regulator valve Air pressure safety relief valve

1,500 BAR (21,750 PSI) SUBSEA & LARGE TENSIONER APPLICATIONS High flow tension pump. Corrosion resistant frame works well for applications near salt water. High flow ideal for subsea applications where compressed air is the required power source. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 50°C (122°F) ambient Proven design = Proven reliability Enhanced Usability: Calibrated 150mm (6") Pressure Gauge Dual oil outlets with quick-connect, no spill couplings Pneumatic Filter/Regulator/Lubricator included Stainless Steel carry frame Designed with Safety in Mind: Easily adjusted pressure regulator valve Air pressure safety relief valve

SPA100A model Flat bottom tank With pneumatic system Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap

Model SPABP300 304 tank with pneumatic system On welded feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank SPABP400A model With pneumatic system Capacity 405 liters Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank with pneumatic system on welded feet Model SPABP500 Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank SPA1000 model Capacity 958 liters Pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank Model SPABP600 With pneumatic system On feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank SPA600 model With pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 Macon

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap

304 stainless steel tank Model SPABP1500 Pneumatic system Capacity 1500 L On welded feet Rounded bottom Atmospheric pressure Corked exterior finish Glossy annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 Clear drawing with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet (tank without level

304 stainless steel tank with pneumatic system On welded feet Domed bottom tank Atmospheric pressure Corked exterior finish Glossy annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clear run with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet

304L stainless steel tank Model SPABP700 With pneumatic system On welded feet Effective capacity 696 liters Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clear run with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank with pneumatic system On welded feet Domed bottom tank Atmospheric pressure Corked exterior finish Bright annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clearing with stainless steel ball valve output 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet Cooling belt H. 500 mm Level indicator with stainless steel protection Circular door diameter 400 mm positioned flush with the bottom of the shell DIN 15 tasting tap Ladder support bar Clock thermometer

TECHNICAL SPECIFICATIONS - 304 stainless steel tank - SPAIP SER 2300 model - Effective capacity: 2297 litres - 304 stainless steel wine rack - Flat bottom with 4 % slope - Bottom thickness : 2.0 mm - shell : 1.5 mm - Floating cap in 316L stainless steel - Complete pneumatic system - Swivel arm with stainless steel handle - Winch for lifting the floating cap - 3 stainless steel feet H. 500 mm adjustable + 80 mm adjustable - Rectangular door 420x530 mm flush with bottom of shell - Swivel bracket with stainless steel handle - Cooling coil with 4 rings on the shell - 2 additional cooling rings on the door - Sensor pocket positioned at the rear of the tank - Clock thermometer with immersion sleeve DIMENSIONS - Diameter 1400 mm - Height (shell) 1500 mm - Height (total) 2600 mm (with bracket) - Height of bowl + feet (500 mm): 2000 mm (without support)

TECHNICAL SPECIFICATIONS - Reference : 007218 - Prestige 12000 pneumatic press - 2 pneumatic doors - Tank capacity: 240 HL - Watertight tank made of AISI 304 stainless steel - Juice drainage via internal drains - Removable drains - Manhole for access to membrane - Watertight rectangular door 600x800 mm with pneumatic opening - Food-grade polyurethane membrane - Stainless steel juice drain pan - Electrical power: 16.5 kW - Tare weight: 8500 kg Connections Juice: Ø 100 outlet, MACON thread + nut with tying spigot Pneumatic: on stop valve with female thread (1'' 1/4 BSP) - Made of stainless steel - Fresh harvest, marc cuvée - Cage rotation programme controlled by the filling process DIMENSIONS - Set of feet - Height 1 m 50 - Length : 8000 mm - Width: 2950 mm - Height without extensions 2750 mm

304 stainless steel tank SPAIP SER 2300 model 304 stainless steel wine keeper Flat bottom with 4% slope Bottom thickness 2.0 mm ferrule 1.5 mm 316L stainless steel floating hat Complete pneumatic system 6419 Swivel crane with stainless steel handle Floating hat lifting winch 3 stainless steel feet H. 500 mm adjustable + 80 mm adjustable Rectangular door 420x530 mm positioned flush with the bottom of the ferrule Swivel crane with stainless steel handle Cooling coil with 4 rings on the ferrule 2 additional cooling rings on the door Thermowell for probe positioned at the back of the tank Clock thermometer with thermowell Stainless steel DIN 15 tasting tap Level valve Diameter 20 with stainless steel protection clear draft and total drainage with square flange 100 x 100 + ball valve on flange outlet 40 MACON Lifting rings Stainless steel ladder support bars Diameter 1400 mm Height (shell) 1500 mm Height (total) 2600 mm (with stem)

- One interface for compressed air, gases, liquids, electrical and electronic signals - Fits to Eisele Adaptive insets - Can be assembled as bulkhead - Material Al nickel-plated or stainless steel - Temperature range -20 to +120 °C - Working pressure range -0,8 to 0 bar or 0 to 24 - Up to max. 14 connections

Screwed BSPP, Reduced Bore, 3 Way, Stainless Steel Body & Ball, RPTFE Seats, Rated PN63, Fitted with Pneumatic Actuator, Size for 5.5 Bar (80psi) Air Supply. Fully Assembled and Tested.

Bright steel EN 10278 The surface is significantly improved due to at least one additional work step – the primary material is beeing drawn, pickled or grinded for this purpose. The bending behaviour can be significantly improved due to additional heat treatment. Facts and Figures Diameter (OD)19,0 mm – 120,0 mm MaterialS235JRC S355J2 C15, C30, C45 other materials upon request Treatment condition+C, +SH, +SL (h7) +QT, annealed TestsUS testing (extra charged) ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

CYLINDER TUBES (HPS & HPZ) •EN 10305-1 (HP) •EN 10305-2 (HPZ) •EN 10305-2 (HPS H9) Seamless, cold-drawn HP precision steel tubes EN 10305-1 Seamless, cold-drawn HPZ tubes have the best dimensional tolerances, plus excellent straightness and roundness. These tubes are thus excellently suited to peeling or honing. A recommended ultrasonic test can also be carried out for a surcharge Facts and Figures Diameter (OD)50,0 mm – 125,0 mm Wall thickness (WT)5,0 mm – 7,5 mm MaterialE355 Treatment condition+SR TestsEddy current testing EN 10893-2 extra charged: Ultrasonic testing EN 10893-10 ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

BOILER TUBES •EN 10216-2 •EN 10216-3 •EN 10217-2 •EN 10217-3 Seamless tubes for pressure purposes EN 10216-2 •unalloyed and alloyed tubes, increased temperature Seamless boiler tubes of this standard have extraordinary temperature and pressure resistance. Due to the production process, a great deal can be offered with regard to purpose-optimized steel qualities. Facts and Figures Diameter (OD)21,0 mm – 610 mm Wall thickness (WT)2,0 mm – 60,0 mm MaterialP195 GH P235 GH, P265 GH, 16Mo3 13CrMo4-5, 25CrMo4 10CrMo9-10 Treatment condition+N TestsTC1 (not including US testing) TC2 (including US testing) VersionsBlack, painted Device pressure standardsAD-2000 W0, AD 2000 W4, PED ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89