Pneumatics in stainless steel - Import export

Workpieces are clamped and released by compressed air. The possible clamping diameter is from 16 to 20 mm. Material: Body, stainless steel. Seal, NBR. Version: Stainless steel bright. Note for ordering: Cylinder head screws M4X35 for fastening from below are included with delivery. Cylinder head screws with low head M5 for fastening from above are not included with delivery. Note: Installed dimensions for plate thickness 6 mm. The stated retaining forces are related to an operating pressure of 0.5 Mpa and a surface quality of Ra 1.6 µm. Repeat accuracy in this case is ±0.2 mm.

SPA100A model Flat bottom tank With pneumatic system Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap

Model SPABP300 304 tank with pneumatic system On welded feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank SPABP400A model With pneumatic system Capacity 405 liters Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank with pneumatic system on welded feet Model SPABP500 Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank SPA1000 model Capacity 958 liters Pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank Model SPABP600 With pneumatic system On feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank SPA600 model With pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 Macon

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap

304 stainless steel tank SPA700 model Pneumatic system Capacity 696 liters Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank Model SPABP1500 Pneumatic system Capacity 1500 L On welded feet Rounded bottom Atmospheric pressure Corked exterior finish Glossy annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 Clear drawing with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet (tank without level

304 stainless steel tank with pneumatic system On welded feet Domed bottom tank Atmospheric pressure Corked exterior finish Glossy annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clear run with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet

304L stainless steel tank Model SPABP700 With pneumatic system On welded feet Effective capacity 696 liters Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clear run with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank with pneumatic system On welded feet Domed bottom tank Atmospheric pressure Corked exterior finish Bright annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clearing with stainless steel ball valve output 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet Cooling belt H. 500 mm Level indicator with stainless steel protection Circular door diameter 400 mm positioned flush with the bottom of the shell DIN 15 tasting tap Ladder support bar Clock thermometer

TECHNICAL SPECIFICATIONS - 304 stainless steel tank - SPAIP SER 2300 model - Effective capacity: 2297 litres - 304 stainless steel wine rack - Flat bottom with 4 % slope - Bottom thickness : 2.0 mm - shell : 1.5 mm - Floating cap in 316L stainless steel - Complete pneumatic system - Swivel arm with stainless steel handle - Winch for lifting the floating cap - 3 stainless steel feet H. 500 mm adjustable + 80 mm adjustable - Rectangular door 420x530 mm flush with bottom of shell - Swivel bracket with stainless steel handle - Cooling coil with 4 rings on the shell - 2 additional cooling rings on the door - Sensor pocket positioned at the rear of the tank - Clock thermometer with immersion sleeve DIMENSIONS - Diameter 1400 mm - Height (shell) 1500 mm - Height (total) 2600 mm (with bracket) - Height of bowl + feet (500 mm): 2000 mm (without support)

TECHNICAL SPECIFICATIONS - Reference : 007218 - Prestige 12000 pneumatic press - 2 pneumatic doors - Tank capacity: 240 HL - Watertight tank made of AISI 304 stainless steel - Juice drainage via internal drains - Removable drains - Manhole for access to membrane - Watertight rectangular door 600x800 mm with pneumatic opening - Food-grade polyurethane membrane - Stainless steel juice drain pan - Electrical power: 16.5 kW - Tare weight: 8500 kg Connections Juice: Ø 100 outlet, MACON thread + nut with tying spigot Pneumatic: on stop valve with female thread (1'' 1/4 BSP) - Made of stainless steel - Fresh harvest, marc cuvée - Cage rotation programme controlled by the filling process DIMENSIONS - Set of feet - Height 1 m 50 - Length : 8000 mm - Width: 2950 mm - Height without extensions 2750 mm

Alloy 17-4 PH is a chromium-copper precipitation hardening martensitic stainless steel with Cu and Nb/Cb additions. 17-4PH Stainless Steel combines high strength, hardness (up to 572°F / 300°C), and moderate corrosion resistance. Alloy 17-4 PH withstands corrosive attacks better than any of the standard hardenable stainless steels and is comparable to Alloy 304 in most media. The alloy is subject to crevice or pitting attack if exposed to stagnant seawater for any length of time, although it is corrosion resistant in some chemical, petroleum, paper, dairy and food processing industries(equivalent to 304L grade). Mechanical properties can be improved (high strength and superior corrosion resistance) when precipitation hardened from Condition A to one of the Condition H tempers. We supply 17-4 PH in the H1150D condition. This is double aged at a temperature between 1140° F and 1160° F for 3.75 hours to 4.

Stainless Steel Strips in grades 430, 304, 316.

Stainless steel Flange