Part loads - Import export

All around eciency is provided by the use of pre-assembled fastening systems; fewer part types, lessened assembly costs, and mimimized supplier base are just a few of the many reasons the trend is in pre-fabricated components. Depending on the application, manufacturers can use dierent materials and take advantage of detachable or permanent captive fastening systems. Features and benefits : -Assembly costs and times are reduced -Mimimized part diversity -High level of assembly reliability -Decreased efforts in assembly -Eliminate lost parts -High load capacity -Integrated tolerance compensation -Minimized supplier base for effectiveprocurement and decreased logistic costs -Removal of thread-cutting and self-tappingscrew combinations -Omission of incorrect product usageand assembly errors -Effortless disassembly and reassembly Advantages : -RELIABILITY OF ASSEMBLY -INTEGRATED TOLERANCE COMPENSATION -ALLOWANCE OF COMPACT DESIGNS - HIGH LOAD CAPACITY

The human feet have to carry us every day and are constantly exposed to great strain. However, they receive far too little recognition for their heavy duty. Feet need a lot of attention, yet very few people like to talk about our daily companions and their supporting role. They are always enclosed, they have to surround themselves with skin-unfriendly fabrics and with shoes that are too tight, too wide or too high. Incorrectly treated and neglected feet often fail their duty and a lack of care often leads to deformations of bones, muscles and tendons and to damaged skin and nails. Yet, good foot care only takes up a little time. Foot creams and foot balms care for, disinfect and scent the skin and provide a supporting massage of the feet. WFS produces corresponding care products on customer’s order.

Ideal automation solutions for loading and unloading of parts on machining centres, presses, measuring stations, etc… Convenient, accurate, repeatable and reliable! The CLA Robot Cell is composed of the following: - A polyarticulated robot or scara with specific grippers - A camera device for part recognition - Automatic camera calibration - Parts loading/unloading system - Protection (cage, mats, detection, etc) - Each application is studied and simulated in order to define the ideal solution - Microplates screening. CLA is a center of expertise of Mitsubishi robots

Our efficient 500 kW boilers use an advanced dual stage burner, 3-way valve system and smart controls to optimise temperature control and minimise fuel burn and emissions. From a small footprint they deliver maximum heat output, with pressures up to 10 bar and temperatures up to 90ºC. Canopy casing has a small footprint for ease of transportation. Cast iron 3-pass flue boiler allows for excellent combustion, stable temperatures and reduced short-cycling. Dual stage burner accurately matches fluctuating heat requirements and achieves lower emissions at part-load operation. Integrated 3-way valve ensures operating temperature is quickly achieved, maintains tight temperature control and reduces short-cycling. Able to communicate with building management systems and plant equipment. Electronic controls closely regulate and stabilise temperatures and offer advanced fault-finding capabilities. Master/slave configuration delivers load-on-demand

Our latest 250 kW boilers are extremely efficient, using an advanced dual stage burner, 3-way valve system and smart controls to optimise temperature control and minimise fuel burn and emissions. From a small footprint we’ll deliver maximum heat output, with temperatures up to 90ºC and pressures up to 10 bar. Canopy casing has a small footprint for ease of transportation. Cast iron 3-pass flue boiler allows for excellent combustion, stable temperatures and reduced short-cycling. Dual stage burner accurately matches fluctuating heat requirements and achieves lower emissions at part-load operation. Integrated 3-way valve ensures operating temperature is quickly achieved, maintains tight temperature control and reduces short-cycling. Able to communicate with building management systems and plant equipment. Electronic controls closely regulate and stabilise temperatures and offer advanced fault-finding capabilities. Master/slave configuration delivers load-on-demand functionality

Universal drive control for utmost efficiency MAGSON magnetically coupled centrifugal pumps are extremely efficient by nature. Using the SFU frequency converter for optimum adjustment to changing conditions, this efficiency will increase even more. Thanks to leading-edge control technology, the SFU permanently adjusts the discharge rate to specific requirements. Whenever the rate has to be reduced or the pump has to be operated with changing volume flows, using a frequency converter will save you lots of money. Thus, the power required by a pump running at half speed is only 12% of the original demand. So the system operates with optimum efficiency but saves a lot of energy, especially in part-load operation.

WIWOX® VIVERK are single and multi-stage spray chamber cleaning systems for aqueous cleaning, pretreatment and degreasing of tools and parts. Loading takes place via an extendable platform, which can be loaded at an ergonomic working height. The workpieces are mechanically cleaned by means of pump pressure in the spray chamber process. The temperature-controlled washing liquid is sprayed onto the workpiece via a spray frame.The washing plant is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

Single and multi-stage spray chamber washing systems for industrial cleaning and degreasing of tools and parts. Loading takes place via an extendable loading platform at ergonomic working height. Before cleaning, the loading basket is loaded and moved into the rinsing chamber. The individual stainless steel washing nozzles can be easily maintained and adjusted according to the application. The motor-driven spraying rotor completely revolves around the loaded parts. The washing system is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

Grease lubrication of unsheltered parts subject to heavy loading and/or impacts, such as friction, rolling and pivoting bearings, splined shafts, knockout spindles, threaded spindles and sliding surfaces of all kinds For harsh operating conditions Advantages and benefits Excellently suited as a safety lubricating grease in mixed friction sector with especially good wear protection Effectively protects against corrosion Contains Mox-active to improve performance For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease. Slow moving bearings(DN-value < 50,000) should be filled completely, normal moving bearings should be filled to 1/3 of the free inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the grease

For the lubrication of machine parts under high mechanical loads Silicone-free alternative for the lubrication of O-rings and sealings during assembly For the lubrication of plastic/plastic and plastic/metal combinations, e.g. beverage can holders in the automotive industry Advantages and benefits High shear stability Excellent adhesion on plastics and metals Compatible with plastics (see table OKS 468) Constant properties without drying, hardening or bleeding NSF H1 registered Silicone-free MOSH/MOAH-free

Long-term lubrication of dirt-sensitive sliding points under vibration stresses Particularly suitable for lubricating chucks on tool machines Broad range of uses at stress-loaded parts, also at contact with cooling lubricants Lubrication of control and drive mechanisms Can be used at filling, labelling and packaging machines Advantages and benefits Resistant to water, steam and aqueous cooling lubricants Prevents frictional corrosion reliably Highly effective due to optimum solid lubricant combination Minimal consumption due to formation of highly effective lubricating films For optimum adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply sufficient paste evenly to the functional surfaces with a brush, spatula, etc. The paste will also act as a sealant. Do not use paste instead of grease and mix only with suitable lubricants.

Press&snap capping machine is used for snapping press type caps, including three main parts: cap feeding system, cap loading system and cap snapping system. It is characterized by its simple structure and high qualification rate. Can be used alone or inline. Linear design makes it suitable for various caps & bottles with good adaptability, widely used for pressing jar cap, plastic bottle cap, can caps, in industries like food, beverages, cosmetics, chemicals,etc. The machine use the straight line into the bottle, automatically arrange caps, sleeving caps ,caps after sleeve and check will go into the gland system by the clamping belt. Due to the lid-cover flat belt design have a drop of slop, the caps after press will become more and more tightly.The machine has simple structure, convenient adjustment, production speed fast, high pass rate, after cap pressing has good performance, suitable for cap pressing of foodstuff, soy sauce, vinegar, vegetable oil’s bottle shape.

WIWOX® CORUS HD ultrasonic systems have been specially designed for cleaning high-quality moulds and precision tools. In maintenance these replace the labour-intensive and often ineffective manual cleaning. The ultrasonic cleaning process can be used for all metal moulds, in particular tools for injection moulding, extrusion, rubber processing as well as aluminium and gravity die casting. A typical structure consists of three stages: 1. cleaning, 2. rinsing and 3. passivating. The usable dimensions are matched to common mould sizes. The workpieces to be washed are placed in the tank either with the aid of a washing basket or with a lifting beam. Our ErgoStation is recommended for manual rinsing, drying and post-treatment. The working area is completely enclosed, brightly illuminated and ventilated. Operation is safe and simple, as the moulded parts are loaded laterally through a sliding door and held by a lifting device during treatment.

Pelton turbines are used in hydropower plants with a high head. The sealing system specifications are equally high.Control of the turbine output is infinitely variable from part to full load by adjusting the nozzle spear valve. The control unit for linear adjustment of the jet needle can be protected against water and silt infiltration by the MANOY® system seal WP. Types 466 and 486 (both inner sealing) were specially developed for these applications. Types 461 and 481 are for outer sealing configurations. In the context of design, types 481 and 486 must have a split housing. All versions can be supplied with customized profile dimensions for existing groove designs.

WE STOCK LOADS OF LITTLEFUSE PARTS. OUR RANGE IS FUSES, SENSORS, RELAYS AND SEMICONDUCTORS / DISCRETES. Please send me an enquiry via liamm@merefields.com or enquires@merefields.com

WE STOCK LOADS OF LITTLEFUSE PARTS. OUR RANGE IS FUSES, SENSORS, RELAYS AND SEMICONDUCTORS / DISCRETES. Please send me an enquiry via liamm@merefields.com or enquires@merefields.com

WE STOCK LOADS OF LITTLEFUSE PARTS. OUR RANGE IS FUSES, SENSORS, RELAYS AND SEMICONDUCTORS / DISCRETES. Please send me an enquiry via liamm@merefields.com or enquires@merefields.com

WE STOCK LOADS OF LITTLEFUSE PARTS. OUR RANGE IS FUSES, SENSORS, RELAYS AND SEMICONDUCTORS / DISCRETES. Please send me an enquiry via liamm@merefields.com or enquires@merefields.com

WE STOCK LOADS OF LITTLEFUSE PARTS. OUR RANGE IS FUSES, SENSORS, RELAYS AND SEMICONDUCTORS / DISCRETES. Please send me an enquiry via liamm@merefields.com or enquires@merefields.com

WE STOCK LOADS OF LITTLEFUSE PARTS. OUR RANGE IS FUSES, SENSORS, RELAYS AND SEMICONDUCTORS / DISCRETES. Please send me an enquiry via liamm@merefields.com or enquires@merefields.com

WE HAVE LOADS OF XILNX PARTS IN STOCK. Please send me an enquiry via liamm@merefields.com or enquires@merefields.com