Outlet valves - Import export

outside thread M10 x 1, CE-0085CQ0255

Outlet valve

Retaining valve with embossed directional arrow or printed in black. With conical nozzles. Various uses.

Waste oil collection/extractor-75 l Venturi-mobile specification Compressed air is pumped into the container via the Venturi block a vacuum is created Manometer/vacuum meter for displaying pressure and negative pressure Oil is extracted via the dipstick opening Level indicator Safety pressure relief valve permanently set to 0.5 bar, with throttle valve Plug nipple for Rectus coupling, type 26, NW 7.2 mm (20 062), ball valve Suction hose, 2 m, with spiral spring Suction probes, Ø 5/6/8 mm With adapter for BMW, Mercedes, VW, Audi and Smart Probe holder Transparent dispensing hose, 2 m, with Steel outlet elbow, ball valve Collection funnel with removable sieve and additional coarse sieve Solid push handle 2 fixed wheels, 2 steering wheels Pressure evacuation Container made of 1.5 mm sheet steel With metal apron to protect against damage Painted with oil-resistant hydrostructure varnish With height-adjustable oil collecting funnel For spare parts see Venturi block (04 426)

At its eight outputs the µCAN.8.pwm-BOX provides pulse width modulated signals (PWM) within a range of 0% to 100% for controlling of actuators (valves etc.). The outlets are overload and short circuit protected. The µCAN.8.pwm-BOX is connected with the central control unit via CAN bus.

High corrosion resistance Hydraulic sleeve, discharge head, motor grouping support and power cable guard in high quality stainless steel Oscillating impellers adjustable for axial movement that prevent them from blocking Diffusers and turbines in noryl They do not require any kind of maintenance Maximum fluid temperature 30°C Immersion limit 150 m Maximum number of starts per hour: 20. Note: Although Termar electric pumps include non-return valves, it is advisable to install 1 additional valve at the outlet of the electric pum

High corrosion resistance Hydraulic sleeve, discharge head, motor grouping support and power cable guard in high quality stainless steel Oscillating impellers adjustable for axial movement that prevent them from blocking Diffusers and turbines in noryl They do not require any kind of maintenance Maximum fluid temperature 30°C Immersion limit 150 m Maximum number of starts per hour: 20. Note: Although Termar electric pumps include non-return valves, it is advisable to install 1 additional valve at the outlet of the electric pump

High corrosion resistance Hydraulic sleeve, discharge head, motor grouping support and power cable guard in high quality stainless steel Oscillating impellers adjustable for axial movement that prevent them from blocking Diffusers and turbines in noryl They do not require any kind of maintenance Maximum fluid temperature 30°C Immersion limit 150 m Maximum number of starts per hour: 20. Note: Although Termar electric pumps include non-return valves, it is advisable to install 1 additional valve at the outlet of the electric pump.

High corrosion resistance Hydraulic sleeve, discharge head, motor grouping support and power cable guard in high quality stainless steel Oscillating impellers adjustable for axial movement that prevent them from blocking Diffusers and turbines in noryl They do not require any kind of maintenance Maximum fluid temperature 30°C Immersion limit 150 m Maximum number of starts per hour: 20. Note: Although Termar electric pumps include non-return valves, it is advisable to install 1 additional valve at the outlet of the electric pump.

High corrosion resistance Hydraulic sleeve, discharge head, motor grouping support and power cable guard in high quality stainless steel Oscillating impellers adjustable for axial movement that prevent them from blocking Diffusers and turbines in noryl They do not require any kind of maintenance Maximum fluid temperature 30°C Immersion limit 150 m Maximum number of starts per hour: 20. Note: Although Termar electric pumps include non-return valves, it is advisable to install 1 additional valve at the outlet of the electric pump.

High corrosion resistance Hydraulic sleeve, discharge head, motor grouping support and power cable guard in high quality stainless steel Oscillating impellers adjustable for axial movement that prevent them from blocking Diffusers and turbines in noryl They do not require any kind of maintenance Maximum fluid temperature 30°C Immersion limit 150 m Maximum number of starts per hour: 20. Note: Although Termar electric pumps include non-return valves, it is advisable to install 1 additional valve at the outlet of the electric pump.

Fleetmaster CNG 15W/40 is a specially formulated multigrade 15W/40 oil tailored to meet the unique demands of compressed natural gas (CNG) engines found in modern commercial vehicles and buses. CNG engines operate at elevated temperatures, which can lead to oil degradation and thickening, ultimately diminishing engine protection. This can result in various issues, including the formation of inlet valve deposits, outlet valve recession, bearing corrosion, increased oil consumption, and a shortened lifespan for lubricants. Fleetmaster CNG 15W/40 is engineered to mitigate the adverse effects of these conditions, ensuring improved engine protection and extended oil durability.

Direct acting solenoid valve are operated directly with the force of the solenoid and due to the same even in 0 bar inlet pressure or 0 bar differential pressure between inlet and outlet port such valve can fully open or close. Generally, as here solenoid force is used, generally this force is counter with the pressure force and/or spring force to Open or Close the solenoid valve. Due the same it has a limitation on the combination of orifice and pressure rating it can provide for a given solenoid force. There are some exception designs which are called pressure balance solenoid valve design but apart from that most of the 3 way direct acting solenoid valve design has this limitation.

The valve isolates pumps from the system during pumps starting and stopping to protect pipe lines and pumps itself. The valve is equipped with a control solenoid valve that is switched on at pump starting and is able to fulfill pipe line gradually, reducing pressure rising peaks and allowing soft starting of the pump with closed outlet. The valve controls pump stopping as well, gradually closing before sending a closing signal to the pump. In case of casual pump stop, the valve acts also as an automatic check valve, preventing backflow over the impeller.

The use of the SAMES KREMLIN RC-756 preserves the health of the operator for all types of paints Description Lightweight Comfortable Cartridges available for all types of paints ► For configurations and part numbers, please refer to the Documents tab. Performance Easy breathing (large inlet and outlet valves) Three high performance filter types for solvent, water-based and isocyanates materials Productivity Lightweight Comfortable with double fixing straps Sustainability Removable cartridges RC756 respirators are compliant with the latest European norms (Respirator: EN140, filters: EN 14393)

Manufactured from AISI 304 Quality Stainless Steel,200 Lt. capacity, single-lined, three-walled; steam cooker,two 10 Kw resistors at bottom, Baykal Resistance brand with insulation,insulated, insulation thickness 7 cm,2 mixers, outlet butterfly valve DN50, water inlet and outlet 3/4 inch sleeve,0,37 kw agitator motor and 90 rpm reducer. Reducer Yılmaz Reducer Mark,380 V preference, Hair thicknesses: 1,5 mm, 2,5 mm.Dimensions: 120mm X120mmx140 Foot Length: 230 mm Foot Length: 230 mm Weight: 400 kg

The O-GEN series oxygen generators extract the available oxygen in the ambient air from the other gases by applying the Pressure Swing Adsorption (PSA) technology. During the PSA process compressed, cleaned ambient air is led to a molecular sieve bed, which allows the oxygen to pass through as a product gas, but adsorbs other gases. The sieve releases the adsorbed gases to the atmosphere, when the outlet valve isclosed and the bed pressure returns to ambient pressure. Subsequently the bed will be purged with oxygen before fresh compressed air will enter for a new production cycle. In order to guarantee a constant product flow, O-GEN oxygen generators use modules of two molecular sieve beds, which alternatively switch between the adsorption and the regeneration phase. Under normal operating conditions and with correct maintenance the molecular sieve beds will have an almost indefinite lifetime.

WOS CD is intended for systems, where amount of generated condensate exceeds capacity of single largest available WOS water oil separator. WOS CD can evenly distribute collected condensate between up to three WOS 35 water oil separators. WOS CD is equipped with flow distributor on the inlet port, up to 8 hose tail connections mounted on elbows for convenient outlet, manual ball valve for cleaning purpose and vent port for safe aeration. Optional wall mounting kit is available. Maximum capacity in regard to free air delivery, when connected to WOS-35 is 120 Nm3/min.

Flat inclined bottom slope 4% DIN 15 stainless steel tasting tap Level 20 diameter tap with stainless steel protection Partial drain with square flange 100 x 100 and outlet valve 40 MACON Total drain with square flange 100 x 100 and outlet valve outlet 40 MACON Rectangular door 420 x 530 mm positioned at the bottom of the shell 5 adjustable stainless steel feet (h. 625 mm) Complete air kit with pump and pressure gauge INOX 316L floating hat Stem Lifting winch Clock thermometer Socket for prob Stainless steel ladder grab bar Vacuum lifting rings Cooling coil with 5 turns on the ferrule H. 860 mm Cooling coil with 2 turns on the ferrule H. 410 mm

TECHNICAL SPECIFICATIONS - Reference : 004661 - Model : SPAIP5000SER - Effective capacity : 4880 Litres - 304 stainless steel wine rack - Flat bottom with 4% slope - DIN 15 stainless steel tasting tap - Level tap diameter 20 with stainless steel protection - Partial drain with 100x100 square flange and MACON 40 outlet valve - Total drain with 100x100 square flange and MACON 40 outlet valve - Rectangular door 420 x 530 mm positioned at bottom of shell - 3 adjustable stainless steel feet (500 mm high) - Air kit complete with pump and pressure gauge - Air float complete in 316L stainless steel - Gallows - Lifting winch - Clock thermometer - Probe socket - Stainless steel ladder support bar - Vacuum lifting rings - Cooling coil with 4 turns on shell H. 560 mm - Cooling coil with 2 turns on shell H. 300 mm DIMENSIONS - Height 3700 mm (with jib) - Height 3000 mm (without bracket) - Outside diameter: 1666 mm - Inside diameter: 1600 mm

Flat inclined bottom slope 4% Stainless steel DIN 15 tasting tap Level valve diameter 20 with stainless steel protection Partial drain with 100x100 square flange and 40 Macon outlet valve Total drain with square flange 100x100 and valve outlet 40 Macon Rectangular door 420 x 530 mm positioned at the bottom of the ferrule NEW MODEL with 5 adjustable stainless steel feet (H. 625 mm) Complete air kit with pump and pressure gauge 316L stainless steel floating hat Gallows Lifting winch Clock thermometer Probe socket Stainless steel ladder support bar Vacuum lifting rings Cooling coil with 5 turns on the shell H. 710 mm Cooling coil with 2 turns on the shell H. 300 mm

304 stainless steel tank Model SPABP600 With pneumatic system On feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank SPA600 model With pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank SPABP400A model With pneumatic system Capacity 405 liters Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

Model SPABP300 304 tank with pneumatic system On welded feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 Macon

304 stainless steel tank Model SPABP1500 Pneumatic system Capacity 1500 L On welded feet Rounded bottom Atmospheric pressure Corked exterior finish Glossy annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 Clear drawing with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet (tank without level

304 stainless steel tank SPA1000 model Capacity 958 liters Pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank with pneumatic system On welded feet Domed bottom tank Atmospheric pressure Corked exterior finish Glossy annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clear run with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet