Motor operated - Import export

The Aquaturbo AER-AS is a high-speed floating mechanical aerator. It consists of a high efficiency ambient operated motor customized to Aquaturbo wet environment operating standards. The unit is constructed from stainless steel and consists of a one-piece float, a suction cone, and a two flight Archimedes style Screwpeller®. The Screwpeller® generates a flat and large-diameter spray pattern maximizing the air-water contact zone. The AER-AS is easily adaptable to nearly any basin configuration. With a lengthened intake cone section, the AER-AS can penetrate water depths up to 8 m. This allows the unit to draw activated sludge of low oxygen concentration from the bottom of the basin to be transformed into an oxygen-rich surface discharge. Easy to install, robust and reliable, the Aquaturbo AER-AS ensures efficient aeration and mixing for years of maintenance free service.

Submerged self-aspirating aerator for wastewater treatment in municipal and industrial applications. Ideal for the Aeration of shallow and medium depth sewage treatment plant tanks. Suitable for buer basins, aeration tanks, aerated lagoons and SBR reactors. Size ranges from 4kW to 37 kW. IP68 Robust motor in epoxy coated cast iron, equipped with temperature control probe Motor specifically adapted for operating submerged and at high-speed in accordance with europelec stan- dards AISI-304 or AISI-316 stainless steel frame specially designed to optimise performance Discharge channels distributing the airflow to optimize aeration and mixing

dryve motor control - connect & control... Operate DC motors wear-free in left/right rotation - very easy with the new control for drylin® E drive systems from igus®. drylin® D5 for DC motors -Ready for immediate use. No parameterization or programming necessary - Left/right run via digital input - Velocities & accelerations via external PWM input signal - Available with and without housing - Inexpensive - Free pattern programs

DryLin® N miniature gliding systems - basics DryLinN2010.wmv DryLin® N - Installation video of the gliding elements DryLin_N_Montage.wmv DryLin® N - Technical data DryLin® linear guide systems in the cleanroom DryLin® N - Applications DryLin® N - Design rules System selection & service life calculation NW 17 = 17 mm rail width The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications. Variants: Standard, Preload (P), floating bearing (LL) extrem low weight Quiet running Installation height 6 mm up to 50 N load NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series. DryLin® N - Low profile linear guide system NK-02-17 DryLin® N - Low profile linear guide system NK-22-17-40 drylin® N - Low profile linear guide system NK-22-17-30 NW 27 = 27 mm rail width The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation. NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged. Over 20 carriage options 9.5 mm installation height 100% lubricant-free iglidur® J plain bearing material up to 500 N Last Best selling linear guide DryLin® N - Low profile linear guide system NK-01-27 DryLin® N - Low profile linear guide system NW-21-27-60P DryLin® N - Low profile linear guide system NK-11-27-80 DryLin® N - Low profile linear guide system NK-02-27 DryLin® N - Low profile linear guide system NW-22-27-60P DryLin® N - Low profile linear guide system NK-12-27-80 NW 40 = 40 mm rail width The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded. Lightweight Installation height 9,5 mm high speeds are possible (up to 5 m/s) iglidur® J plain bearing material up to 700 N Last DryLin® N - Low profile linear guide system NK-01-40 DryLin® N - Low profile linear guide system NK-02-40 drylin® N - low profile linear guide system preload NW-01-40P drylin® N - low profile linear guide system preload NW-02-40P NW 80 = 80 mm rail width The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation. Installation height 12 mm 100% lubricant-free Wide torque support up to 1000 N Last Gliding elements made of iglidur® J or J200 DryLin® N - Low profile linear guide system NK-02-80 Telescope system Mounting rails: Anodized aluminum Intermediate rail: Plastic Options: Full extension, over extension (+ 20 mm), partial extension Continuous lengths up to 1200 mm extended total length Lubricant-free Low noise Corrosion resistant From stock DryLin® telescopic rails End caps. The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way. Easy installation Low-priced Dismantling possible High retention force DryLin® N end caps Low profile linear axis - SLN-27-01 SLN-27-01: Linear axis for manual operation with hand wheel (SHT-HR-05-22-15-OG) SLN-BB-27-01: Ball bearing linear axis for manual adjustments with hand wheel 100 / 150 / 200 / 250 mm strokes Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm Manual and motorized operation drylin® miniature linear axis Low profile linear axis - SLN-27-02 SLN-27-02: Linear axis with NEMA11 stepper motor, ball bearing spindle over motor bearing SLN-BB-27-02: Ball bearing linear axis with NEMA11 stepper motor Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7 Manual and motorized operation drylin® SLN low profile linear axis with motor DryLin® N low profile guide systems offer you low profiles in various widths. Like in all drylin® products, the carriage runs without lubrication in anodized aluminum profiles. The material used and the unique design make DryLin® N a cost-efficient and flexible guide system. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Rail made of anodized aluminum 2 Gliding elements made of iglidur® J or J200 3 Carriage made of chromated zinc or plastic 4 Carriage with threaded hole or through hole Advantages: Small installation height between 6 and 12 mm Lightweight Numerous carriage options – also with pretension Maintenance-free, self lubricating Corrossion-resistant Low wear with low coefficient of friction Rails in silver or black anodized When not to use ? When precision below 50 μ is required In high loads over 50 kg drylin® T drylin® R drylin® W When high resistance to chemicals is required drylin® W drylin® R DryLin® N miniature gliding systems - basics DryLinN2010.wmv DryLin® N - Installation video of the gliding elements DryLin_N_Montage.wmv Standard, preload and floating bearing NW 17 = 17 mm rail width The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications. Variants: Standard, Preload (P), floating bearing (LL) extrem low weight Quiet running Installation height 6 mm up to 50 N load NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series. 1. NW-01-27 standard 01 with through hole g 2. NW-02-27 standard 02 with threaded hole 3. Preload with through-hole or threaded hole 4. uinjection-molded with through-hole or threaded hole 5. NW-21-27-60P Vollkunststoffschlitten mit Durchgangsbohrung 6. NW-22-27-60P solid polymer carriage with through hole 7. NW-11-27-80 double carriage with through hole NW 27 = 27 mm rail width The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation. NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged. Over 20 carriage options 9.5 mm installation height 100% lubricant-free iglidur® J plain bearing material up to 500 N Last Best selling linear guide DryLin® N - Low profile linear guide system NK-01-27 DryLin® N - Low profile linear guide system NW-21-27-60P DryLin® N - Low profile linear guide system NK-11-27-80 DryLin® N - Low profile linear guide system NK-02-27 DryLin® N - Low profile linear guide system NW-22-27-60P DryLin® N - Low profile linear guide system NK-12-27-80 1. Standard 02 with threaded hole 2. Injection-molded with threaded hole 3. Standard 01 with through hole NW 40 = 40 mm rail width The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded. Lightweight Installation height 9,5 mm high speeds are possible (up to 5 m/s) iglidur® J plain bearing material up to 700 N Last DryLin® N - Low profile linear guide system NK-01-40 DryLin® N - Low profile linear guide system NK-02-40 drylin® N - low profile linear guide system preload NW-01-40P drylin® N - low profile linear guide system preload NW-02-40P 1. Standard 02 with mounting nuts 2. Injection-molded with mounting nuts NW 80 = 80 mm rail width The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation. Installation height 12 mm 100% lubricant-free Wide torque support up to 1000 N Last Gliding elements made of iglidur® J or J200 DryLin® N - Low profile linear guide system NK-02-80 Telescope system Mounting rails: Anodized aluminum Intermediate rail: Plastic Options: Full extension, over extension (+ 20 mm), partial extension Continuous lengths up to 1200 mm extended total length Lubricant-free Low noise Corrosion resistant From stock DryLin® telescopic rails End caps. The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way. Easy installation Low-priced Dismantling possible High retention force DryLin® N end caps Low profile linear axis - SLN-27-01 SLN-27-01: Linear axis for manual operation with hand wheel (SHT-HR-05-22-15-OG) SLN-BB-27-01: Ball bearing linear axis for manual adjustments with hand wheel 100 / 150 / 200 / 250 mm strokes Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm Manual and motorized operation drylin® miniature linear axis Low profile linear axis - SLN-27-02 SLN-27-02: Linear axis with NEMA11 stepper motor, ball bearing spindle over motor bearing SLN-BB-27-02: Ball bearing linear axis with NEMA11 stepper motor Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7 Manual and motorized operation drylin® SLN low profile linear axis with motor

The Fibreflam ISO6 curtain is a flexible partitioning curtain without irrigation. With a fire resistance degree of EI60, it also conforms to the DAS NF S61-937-1 and -4 standard. Thanks to its control panel and its motor operating in 400V, the closure of the curtain is obtained by gravity in case of fire alarm. Only its reopening is motorised. The standard dimensions of this fire curtain are up to 4.36 m wide and 4.21 m high. In spaces with strong architectural constraints, this curtain can easily be hidden behind cladding. We can help you with this project, so don't hesitate to submit your requirements via this contact form or by clicking on our website

CHARACTERISTICS •Design and manufacturing of orientation moulds were carried out •Having high dimensional precision and impact-resistance •Capable of forming products with inlay •The injection moulding parts are suitable for forming products with various shapes and thin walls •Multi polar magnetization can be carried out as per customer's requirements APPLICATIONS •Different kind of micro-special motor •Different kind of fan motor •Different kind of DC motor •Synchronization electric motor •House electric apparatus •Ice chipper electric motor •Hand-operated electric generator •Automobile motor •Time gauge •Instruments for auto

"We offer unbalanced vibration motors. The vibrators can be installed in any position to maximize the centrifugal force. Features: - On request in 220-240/380-415 volts - 50 Hz and 220-240/440-480 volts - 50 Hz. - Static moments expressed for a single vibrator. - Type of protection IP 66/7 - Insulation class: F (155°C). - Tropicalized motor as standard. - Operating temperature : -30°C to +40°C. - Reference standard: CEI EN 60034."

The IKO Linear Motor Table LT is a compact and highprecision positioning table made of aluminum alloy, with an optical linear encoder built in and an AC linear servomotor incorporated between moving table and bed. Three series (Compact Series LT···CE, Long Stroke Series LT···LD and High Thrust Series LT···H) are available and can be selected according to the application. The lightweight moving table and large thrust force of Linear Motor Table LT enables operation with high acceleration/deceleration and high response. Further, the advanced servo technology achieves high static stability and speed stability. Linear Motor Table LT is ideal for applications such as semiconductors and liquid crystal related equipment, measuring instruments, assemblers and conveying machines that require highspeed work.

With our trusted separator system, suitable for up to 29,000 residents at a system power of 600 m3/h. The base version, the AWALIFT 9/4, achieves a discharge head of 40 mWS, and the expanded version AWALIFT 9/4x2 achieves 80 mWS. Smart pump controllers are available as accessories, and are specially adapted to your system and your specific needs. The impellers are adapted to the operating point to achieve optimal performance. Draining towns with up to about 29,000 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with four separator systems Four centrifugal pumps and motors according to type and operating location required Eight pump gate valves Four STRATE non-return valves One Y-pipe DN 300 Four pressure pipe gate

With a diameter of 2.5 m and a height of 3 m, the tank and separator system is equipped to reliably drain wastewater for a small city of up to 18,600 residents. In addition, the tank offers a gas and odor-tight seal. Three pumps provide good operational reliability; maintenance work is easy to complete thanks to dry installation. Draining towns with up to about 18,600 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with three separator systems Three centrifugal pumps and motors according to type and operating location required Six pump gate valves Three STRATE non-return valves One Y-pipe DN 250 Three pressure pipe gate valves DN 250 Level measurement

The AWALIFT 4/2 achieves a discharge head of up to 55 mWS, and is also available in the AWALIFT 4/2x2 version. This variation achieves a discharge head of up to 110 mWS. An opening of just 2 x 2 m is required for installation; once installed, the exterior dimensions of the system are 4.5 x 3.5 m. Different motor variations allow the system to be precisely adapted to your particular needs. The impellers are adjusted to the specific requirements. Draining towns with up to about 5600 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system. Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 150

4 axis CNC floor-type vertical spindle machining center. 4 axis (X, Y, Z, A) managed by CNC. By means of dedicated tools it’s suitable for working on 5 sides of aluminium, PVC and steel sections. The work pieces are held by means of 4 pneumatic vices on the mobile beam, that can be positioned on any angle between +125° and -125°. The rotation is directly managed by the control cycle. It offers a high programming functional capacity by using a three-dimensional graphics software. Electro-welded base designed to grant maximum rigidity and functional capacity of use. The axis slide on precision profile guides with ball recirculation and are driven by motors operated with digital systems. The vices slide on ball recirculation screws, and can be positioned manually by referring to a mm-scale and a laser pointer. By using the disc cutter it is possible to carry out end-milling operations on both the ends of the work piece (end-milling cycle). Milling operations can be performed with...

4 axis CNC floor type vertical spindle machining centre. 4 axis (X, Y, Z, A) managed by CNC. By means of dedicated tools it’s suitable for working on 5 sides of profiles. Suitable for processing on ANY surfaces, generated by the rotation of the spindle axis (side by side at Y axes) on the positions within 180° (± 90°). The axis slide on precision profile guides with ball recirculation and are driven by motors operated with digital systems. The locking clamps slide on guide rail. The working table can be divided in two areas so to get two separate working stations. Using a disk cutter, it is possible to work on both sides at the end of the profile (end milling cycle). Milling operations can be performed with linear and circular interpolation of the axes X-Y-Z. The hinging length stop are pneumatically managed. The electric spindle is suitable for quick tool holder change. The tool magazine is mounted on the mobil upright. The tool change can be carried out into any position...

5 axis CNC floor type vertical spindle machining center. 5 axis (X, Y, Z, C, A) managed by CNC. Suitable for milling, drilling, tapping and cutting on the 5 sides of aluminum, PVC, steel and light alloys profiles; thanks to the 5 axis interpolation, the machine is able to execute composite cuts. The X or longitudinal axis, the Y or transversal axis and the Z or vertical axis belong to the tool movement. They can be interpolated in linear and circular way on 3-dimension geometrical planes, belonging to X-Y-Z. The C axis can be turned and positioned on all angles within 440° (± 220°); the A axis can be tilted and positioned on all angles within 250° (± 125°). The axis slide on precision profile guides with ball recirculation and are driven by motors operated with digital systems. The locking clamps slide on guide rail. By using the disc cutter it is possible to carry out end-milling operations on both the ends of the work piece (end-milling cycle). Milling operations can be...

An especially large system with six pumps and a tank content of 26.0 m3, a system power of 800 m3/h and a weight of approx. 6.3 t can reliably handle drainage for a city with up to 37,000 residents. The unique pump controls achieve a discharge head of 40 mWS, while the AWALIFT 10/6x2 version boosts this discharge head to 80 mWS. Proven components, such as our separator, separating flaps, level controller, etc. are used in this system as well. Draining towns with up to about 37,000 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with six separator systems Six centrifugal pumps and motors according to type and operating location required Twelve pump gate valves Six STRATE non-return valves One Y-pipe DN 300

With a system power of 250 m³/h, the AWALIFT 6/3 achieves a discharge head of 48 mWS. The AWALIFT 6/3x2 version allows for a discharge height of 96 mWS. The fully automated, floodable STRATE AWALIFT system fulfills the requirements of DIN 1986-100 and DIN EN 12056-4. Draining towns with up to about 11,600 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with three separator systems Three centrifugal pumps and motors according to type and operating location required Six pump gate valves Three STRATE non-return valves One Y-pipe DN 200 Three pressure pipe gate valves DN 200 Level measurement LGA certified according to DIN EN 12050-1 /. -4

The AWALIFT 5/2 achieves a discharge head of up to 50 mWS, and is also available in the AWALIFT 5/2x2 version. This variation achieves a discharge head of up to 100 mWS. Different motor variations allow the system to be precisely adapted to your specific needs, and the impellers are adjusted to the operating point. This system is used for drainage in towns with up to 7,000 residents. Draining towns with up to about 7000 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system. Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 150

This sewage pumping system can be used for districts with up to 3700 residents and it offers a discharge head of up to 80 mWS. The expanded version, the AWALIFT 3/2x2, even offers a discharge head of up to 120 mWS. Accessories, such as a smart pump controller, a basement drainage pump, pipelines and a variety of flanges within a single building, and much more are available for purchase on request. Draining small towns with up to about 3700 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 125 Two pressure pipe gate valves DN 125

The AWALIFT 2/2x2 wastewater pumping system is suitable for towns with up to approx. 2800 residents. The system can achieve a discharge head of up to 120 mWS, thanks to the parallel operation of two pumps. An adapted, intelligent pump controller handles control, ensuring almost fault-free operation. Draining small towns with up to about 2800 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems 2 x 2 centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 100 Two pressure pipe gate valves DN 100 Level measurement

The AWALIFT 2/2, with a system power of 60 m3/h raw wastewater, is suitable for towns with up to 2800 residents. The separator system offers a clean solution, since the container is gas and odor-tight. Different motor variations allow the system to be individually adapted to on-site conditions. AWALIFT systems can also move wastewater over long distances. Draining small towns with up to about 2800 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 100 Two pressure pipe gate valves DN 100 Level measurement

Anywhere small quantities of wastewater need to overcome a high discharge head is the perfect application for the flattened version of the AWALIFT 2/2, with a shape that makes it a good space-saving option. It also offers our proven bulk materials collection system and is installed dry. The system controls are individually adjusted and installed in a switch cabinet outside of the shaft. Draining small towns with up to about 1700 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves Two pressure pipe gate valves DN 100 One Y-pipe DN 100

The AWALIFT 1/2 penta offers lots of power while requiring very little space. The system is installed directly at the shaft wall; this configuration significantly reduces the required shaft diameter. In addition, the 1/2 penta offers our trusted separator system. The use of two pumps ensures a high level of operational reliability. Large system capacity despite small space requirements: The system is set up directly at the shaft wall This makes a small shaft diameter possible Larger buildings, industrial companies, individual streets Facilities that cannot be drained using natural gradient As protection from backwater damage Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two non-return valves AWASTOP DN 100 K Y-pipe DN 100 Two pressure pipe gate valves DN 100

The STRATE AWALIFT 1/2x2 is used in many applications that require small quantities of waste water to overcome a high discharge head. With a capacity of 15 m3/h, the system is suitable for up to 750 EW. The system can be adapted to your individual needs through the use of different motor variations. Drainage of small towns with up to about 750 residents that cannot be drained using natural gradient. Drainage with larger pumping heads and longer pressure pipes As an intermediate pumping station within a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features The tank with two separator systems Four centrifugal pumps ST (M)65/80, motors according to type and operating location required Four pump gate valves One Y-pipe Two STRATE non-return valves Two gate valves Level measurement LGA certified according to DIN EN 12050-1 /. -4

The AWALIFT 1/2 is used primarily in municipal applications for draining large properties. It is a fully automated, floodable sewage pumping system with a proven separator system for up to 750 EW. Alternating two pumps provides a high level of operational reliability. There is no need to provide reserve pumps. This system also has a gas and odor-tight tank, the surface of which is coated with high-quality corrosion protection. •Larger buildings, industrial companies, individual streets •Facilities that cannot be drained using natural gradient •As protection from backwater damage •Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One tank with two separator systems Two rotary pumps and motors according to type and operating location required Two non-return valves AWASTOP DN 100 K Y-pipe DN 100 Two pressure pipe gate valves DN 100 Level measurement LGA certified according to DIN EN 12050-1 /. -4

The AWALIFT 0/2 double installation with proven STRATE system conforms to the requirements of DIN 1986-100 and DIN EN 12056-4. The installation forms a closed, gas and odor-tight system that fulfills the highest requirements for hygiene and safety. The system can also be installed directly in the basement; no excavation is required. If it is installed outdoors, however, using a STRATE AWALIFT shaft is recommended. Larger buildings, industrial companies, individual streets Where the reserve pump has to guarantee fail-safe operation e.g. in restaurants and public buildings Facilities that cannot be drained using natural gradient As protection from backwater damage Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Two non-return valves AWASTOP DN 100 K Two pressure pipe gate valves DN 100

The AWALIFT 74/2 double installation provides improved operational reliability, since the pumps alternate to pump waste water (which has already been separated from bulk materials) from the separator. Bulk materials are first pumped into the pressure line, then the line is flushed with pre-cleaned water from the tank. Multi-family homes Where the reserve pump has to guarantee fail-safe operation e.g. in restaurants and public buildings Facilities that cannot be drained using natural gradient As protection from backwater damage Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One tank with separator system Two centrifugal pumps and motors according to type and operating location required Two non-return valves AWASTOP DN 100 K Two pressure pipe gate valves DN 100 Level measurement LGA certified according to DIN EN 12050-1 /. -4

The AWALIFT 0/1 requires a space of just 1200 mm x 1200 mm or d=1500 mm. Thanks to its unique design, it can be installed in even non-standard installation areas. A variety of available motor power levels make it suitable for use in a wide range of applications. Multi-family homes Facilities that cannot be drained using natural gradient As protection from backwater damage Product features One tank with separator system One centrifugal pump and motor according to type and operating location required One non-return valve AWASTOP DN 100 K Level measurement Pump control type AWAmaster 1 1.5 m power supply cable, with CEE plug LGA certified according to DIN EN 12050-1 /. -4

The STRATE AWALIFT 74/1 is used primarily for draining floors, multi-family buildings and properties above the backflow level in accordance with DIN 1986-100, e.g. for properties that cannot be drained via a natural slope. DIN EN12056-4 establishes the upper edge of the street at the connection point to the public sewer system as the backflow level. Two-family homes Facilities that cannot be drained using natural gradient As protection from backwater damage Product features One tank with separator system One centrifugal pump and motor according to type and operating location required One non-return valve AWASTOP DN 100 K Level measurement Pump control type AWAmaster 1 1.5 m power supply cable, with CEE plug LGA certified according to DIN EN 12050-1 /. -4